Founder
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Addressing concerns inside and outside your manufacturing business
Employees on the shop floor and in the office feel anxiety of mistakes as sharply as customers
- By Lisa Wertzbaugher
- November 5, 2022
- Article
- Shop Management
As a salesperson, I’ve focused on growth most of my career. I go out and find the business and somebody else processes and retains it. My job is to hunt new work, keep the pipeline full, and check in regularly with existing customers to keep them happy.
Sure, I’ve had my fair share of managing unhappy customers, helping to smooth things over when a part doesn’t meet specifications. But now that I’m a business owner, unhappy customers are a much more personal problem.
When you are the one who pays the bills at the end of the day, a lost customer and rejected work hits harder. The small business I own with my husband has been growing at a rapid pace the past three years, almost doubling in size each year. With growth comes hiring, onboarding, and training. Everyone in manufacturing knows hiring skilled labor is almost impossible, and most of us make do with whoever shows up for the interview and has a pulse. Fortunately, we have found employees with good attitudes and work ethic—which, in our opinion, outweighs experience and education.
As my husband has transitioned from working in the business to working on the business, we have experienced growing pains. Most recently, we had some significant errors on a large job that have cost us time and money. As we worked through the event, I took notes to share lessons learned about dealing with unhappy customers.
Tackle Complaints Right Away
When a customer calls to report defective work, it often can stun an organization into inaction.
One rule I live by is deliver bad news as soon as you have it. This rule also applies when addressing customer complaints. A big problem can overwhelm leaders, and some team members will struggle with knowing when and how to start sorting through next steps. As a remedy, all staff involved in the project should immediately meet to review issues, discuss the root cause, and develop a plan with assigned tasks for moving forward.
Assigning tasks when bad news comes down is critical. Everyone needs to know exactly what they are accountable to address. Most importantly, someone should be designated to follow up with the customer, which brings me to my second point.
Communicate Early and Often
This is more of a sales tip—and a no-brainer for seasoned sales professionals—but angry customers need you to contact them frequently with updates while issues get resolved.
Dissatisfaction can be diffused by increasing communication. When things go wrong, customers have heightened anxiety; even 24 hours without communication can cause stress. They want to know they are high priority and that you are addressing their issues. Even if there isn’t a status update, check in and let them know when they can expect to hear from you next.
Double Down on Oversight and Training
Increase your involvement with employees. As business owners and managers, we have a full plate, and overseeing new employees seems tedious and unproductive at times.
However, it is likely that the employees involved in the error have as much anxiety as the unhappy customer. Typically, they welcome more handholding, especially if they are Gen Z and Millennial employees.
It might even be worth it to assign a more-tenured employee to partner with a less-seasoned employee, at least for the short term. We implemented end-of-day meetings with newer employees to review all work completed and talk through questions and concerns. Establish a process for bringing questions to a designated mentor and proactively meet with staff to review bottlenecks. Do not assume employees will speak up.
Give Positive Feedback and Encouragement
Most important, maintain a positive attitude and give more feedback on what’s going well than what’s going wrong. Growth is great, but new business puts a lot of stress on an organization. The higher the growth rate, the more stress. When new jobs come into the shop, the staff needs extra support and positive feedback as they tackle new processes and tasks.
Errors and mistakes should be expected and planned for as much as possible. Ultimately, the business owner benefits most from a growing company, so be good to your staff. Give them praise and many thanks for the extra effort they put in to add revenue and profit.
About the Author
About the Publication
Related Companies
subscribe now
The Tube and Pipe Journal became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry, and it has become the most trusted source of information for tube and pipe professionals.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 05/14/2024
- Running Time:
- 62:12
Cameron Adams of Laser Precision, a contract metal fabricator in the Chicago area, joins the podcast to talk...
- Trending Articles
Making the move from hard automation to robotic welding
Zekelman Industries to invest $120 million in Arkansas expansion
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
HGG Profiling Equipment names area sales manager
Miscellaneous metals fabricator increases productivity and opportunity with plasma cutting
- Industry Events
Laser Welding Certificate Course
- May 7 - August 6, 2024
- Farmington Hills, IL
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,