Assembly and Joining Articles

Assembly is much more than welding. This technology area covers adhesive mixing, metering, and dispensing equipment; hardware-insertion presses; clamps; fixtures, holders, jigs, and vises; part counters; part feeders; and part positioners.

Filter Content

Oxyfuel brazing primer

March 19, 2014

By: ,

Oxyacetylene brazing is a simple yet effective metal joining method that produces sound, leakproof connections. The process is simple to perform, does not melt or distort the base metals, and allows for increased tolerance control. Make sure you are familiar with the common brazing alloys, how to prepare base metal and fittings, and navigate through pitfalls to ensure optimal results.

Continue Reading

Better organization of assembly templates

March 3, 2014

By:

KSM Industries Inc., Germantown, Wis., found success building rack mounts for power equipment, but as the business grew, the number of templates did as well. The company needed a better organization plan other than putting the templates on pallets, hoping to find them when they were needed again.

Continue Reading

Hardware insertion meets automation - TheFabricator.com

Hardware insertion meets automation

September 5, 2013

By:

Star Precision Fabricating, Houston, has always had hardware insertion capabilities since it opened its doors in the early 1990s. It has added more machines as the need for additional capacity has emerged. The latest automated equipment addition is making a huge difference in the speed at which it processes assembly work.

Continue Reading

Integrating stamping, fabricating, and assembly - TheFabricator.com

Integrating stamping, fabricating, and assembly

July 12, 2013

By:

Genesee Stampings and Fabrication has undergone a strategic shift from its core stamping and fabricating business. It has added an assembly operation to the shop floor.

Continue Reading

Designing for adhesive bonding - TheFabricator.com

Designing for adhesive bonding

June 3, 2013

By: ,

While it is sometimes more economically favorable to use adhesives as an alternative to welding, a fabricator must consider many important points before making the changeover.

Continue Reading

The lowdown on lean fastening - TheFabricator.com

The lowdown on lean fastening

January 7, 2013

By:

Selecting the proper equipment, locating that equipment in the right spot on the shop floor, and using the right hardware can help to introduce new efficiencies and reduce costs in a fabricator’s joining and assembly operations.

Continue Reading

A fabricating home run - TheFabricator.com

A fabricating home run

August 30, 2012

By:

Kohler High School’s Engineering Club captured the attention of the Milwaukee Brewers, the MLB Network, and thousands of others with its Miller Park replica grill.

Continue Reading

How to wrap up packaging problems - TheFabricator.com

How to wrap up packaging problems

August 3, 2012

By:

A poorly packaged pallet of parts damaged in transit turns all that value-adding upstream activity--cutting, deburring, bending, welding, grinding, heat treating, plating, powder coating, hardware insertion, and assembly--into waste

Continue Reading

A tale of two worlds in one shop - TheFabricator.com

A tale of two worlds in one shop

June 13, 2012

By:

Vista Manufacturing Co., Kansas City, Kan., stands out even more than other fab shops in an industry where one metal fabricating shop is rarely an exact copy of another. The company, which has roots in electronics product manufacturing, offers electronics assembly for those customers needing parts like printed circuit boards. This value-added capability, combined with its metalworking talents, has made Vista an important partner for several customers in the Midwest.

Continue Reading

Pneumatic cartridge gun

Adhesive bonding broadens the fabricator’s toolbox

April 1, 2011

By:

Structural adhesives may be able to complement other metal joining processes. The process can't replace all riveting and welding, but it can be a viable alternative for the right application.

Continue Reading

Tips for specifying clamps for automated welding

January 17, 2011

Too often, specifying clamps for a fixture in an automated welding cell is an afterthought. That slight can lead to unnecessary costs and complexity.

Continue Reading

Fast tracking with W44 beams - TheFabricator

Fast tracking with W44 beams

June 11, 2010

By:

A truss railroad bridge that was destroyed in a massive flood was replaced within a year thanks to a fast-tracked rebuild effort that featured W44 beams.

Continue Reading

truck with structural adhesive

Bonding with adhesives

May 7, 2010

By:

Welding and fastening have long been the go-to methods for metal bonding applications, but are they always the best, most cost-effective methods? Maybe, maybe not. Adhesives are gaining in popularity, particularly for joining dissimilar materials.

Continue Reading

Weldflash Sensors

Sensors in the welding environment

May 26, 2009

By:

From weld resistance to factor 1, sensors employ technology to deliver accurate, long-lasting operation, even in challenging welding environments. When properly applied, these systems reduce downtime and replacement costs while optimizing production.

Continue Reading

Sensors in the welding environment - Which ones are tough enough for the job?

May 26, 2009

By:

From weld resistance to factor 1, sensors employ technology to deliver accurate, long-lasting operation, even in challenging welding environments. When properly applied, these systems reduce downtime and replacement costs while optimizing production.

Continue Reading