September 9, 2011
Over the past decade metal folding technology has evolved significantly. Years ago most considered the process optimal only for large, unwieldy workpeices. But with fast, servodriven folding beams that can bend in both the positive and negative direction, the situation has changed dramatically.
November 1, 2010
Bidirectional bending was a big step forward in the capabilities of folding machines. However, the technology continues to advance with the emergence of faster folding speeds, more tooling flexibility, wider working envelopes, and more specialized folding capabilities.
July 14, 2009
Today's folding technology can help bring a new level of efficiency and capability to a metal forming operation. Among the enhancements in modern folding systems are increased automation and gauging capabilities and the ability to fold an even wider range of materials.
January 15, 2008
When bending material thicker than 10-gauge, at least two operators are needed to handle the plate, and manipulating it for various bends can be a strenuous work, not to mention a serious safety hazard for the operators. That's heavy stuff, and for these large-workpiece applications, a folding machine can step up to the plate.
July 10, 2007
It would be an understatement to say that contract manufacturer EPMP Ltd., Seguin, Texas, got off to an inauspicious start. After just four years of operation, Ernest Plant sold the slumping company in 1988. This appeared to be just another short story of a failed start-up manufacturing shop....
November 9, 2004
Folding machines aren't the fastest machines for bending sheet metal, but for low- to medium-volume production, they can provide an efficient bending process. Because the equipment operator does not support the weight of the material during the bending cycle, folding machines are well suited to large, bulky parts. Also, part quality is not dependent on an operator's skill.
December 11, 2003
Schwenkbiegemachinen, or swing bending machines, have been in use for more than 200 years. European manufacturers began to power them with electrical or hydraulic power after World War II, when an enormous amount of sheet metal was used in the reconstruction of Europe.
March 13, 2003
The H.L. Lyons Co., Louisville, Ky., began 40 years ago as an X-ray equipment company in the basement of Keith and Livingston Lyons parents' house. It later became a general metal fabricating business.