Plasma Cutting Products

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content

Plasma, oxytorch hybrid cutting tables introduced

May 19, 2016

Salsco Inc. has introduced the Konstant Cut & Kleen Hy-Production line of plasma and oxytorch hybrid cutting tables. They combine the attributes of a dedicated water table and zoned dual side dry cutting table designs. The operator never has to climb into the table, and no production time is...

Continue Reading

Cutting machine can be configured with plasma and/or oxyfuel torch

April 18, 2016

Koike Aronson has introduced the Plate-Fab cutting machine to give small fabricators more production options. It can be configured with one plasma cutting torch and/or one oxyfuel torch. The machine includes a unitized, double-walled downdraft table that isolates sparks and fumes while...

Continue Reading

Plasma tables offered in sizes up to 5 by 10 ft.

April 6, 2016

Trick-Tools offers ArcPro series plasma tables from ArcLight Dynamics in 5- by 5-, 4- by 8-, and 5- by 10-ft. sizes. The plasma tables ship fully assembled and tested and come standard with water table, torch height control, and computer with...

Continue Reading

Air plasma systems handle automated, mechanized cutting

February 18, 2016

ESAB Welding & Cutting Products has introduced ESAB A-series air plasma systems for automated and mechanized cutting. The compact A40, A60, A80, and A120 plasma cutters provide an 80 percent duty cycle at their respective rated outputs of 40, 60, 80, and 120 amps. Production cutting and piercing...

Continue Reading

All-in-one cutting unit works without electricity

February 10, 2016

Hypertherm offers the Freedom 38 PPA™, an all-in-one unit combining plasma, power, and air for cutting in areas without access to electricity. It combines a Powermax125® plasma system with a 38-kW generator and air compressor. Cut capacity for the included plasma system is 1-1/2 in. at a...

Continue Reading

CNC introduced for cutting systems

December 18, 2015

Hypertherm has introduced the EDGE® Connect CNC for plasma, laser, and waterjet cutting systems. It includes the newest version of Phoenix™ software, as well as CutPro Wizard™ for job setup and an introductory version of ProNest® CNC nesting software. This added software allows table...

Continue Reading

Plasma/oxyfuel cutting machine offers faster rapid speed

November 27, 2015

Koike Aronson has introduced the Mastergraph EX2 CNC plasma/oxyfuel cutting machine. It features a 1,400-IPM rapid speed, with a contour speed of 600 IPM. The 6-HP servo drives and low-backlash planetary gearboxes with new linear bearings help ensure smooth motion and excellent cut quality, the...

Continue Reading

Quick-change torch designed for plasma cutting systems

June 29, 2015

Hypertherm has introduced a new Centricut brand quick-change torch for use with ESAB plasma cutting systems. The torch is designed to replace ESAB PT-36, PT-600, and PT-19XLS torches. According to the company, the two-piece, quick-change design allows operators to change out consumables up to...

Continue Reading

Plasma system cuts mild steel up to 0.5 in. thick four times faster than oxyfuel

June 16, 2015

ESAB Cutting Systems has introduced Smart Plasmarc™ 200, a new m2 plasma system for heavy-duty mechanized cutting. The system cuts a variety of material types and thicknesses using air, oxygen, or nitrogen gases. It cuts and pierces mild steel up to 1.25 in. thick, with the capacity to edge-start...

Continue Reading

CNC hardware/software designed for plasma, oxyfuel cutting

May 27, 2015

OSAI USA has introduced OPENCut™ CNC hardware/software for plasma and oxyfuel cutting. The plasma generator system is available in 120-, 250-, and 420-amp sizes, equipped with automatic gas console. Included in the system package are a multitouch HMI with 2-D and 3-D graphics for program...

Continue Reading

Portable air plasma system includes built-in internal compressor

March 16, 2015

Hypertherm has introduced the Powermax30® Air, a new portable air plasma system and internal compressor in one. Able to operate on 120- or 240-V lines, the unit enables metal cutting just about anywhere. Weighing 30 lbs., it provides 30 amps of output, giving it the highest power-to-weight...

Continue Reading

Welding equipment catalog updated

January 28, 2015

Lincoln Electric’s 2015 equipment catalog details its GMAW, GTAW, and multiprocess welding equipment, as well as plasma cutting systems, welding automation, fume control systems, training products, orbital welding systems, accessories, and welding gear. The catalog has been released in print,...

Continue Reading

CNC plasma tube cutter adjusts quickly to various material shapes

January 19, 2015

Electro-Mechanical Integrators (EMI) offers the Tube Processing Center (TPC), a CNC machine for cutting any combination of intersecting angles, copes, slots, and holes with no tooling changes. Changes to material sizes and shapes are accomplished in a matter of minutes with only an Allen wrench....

Continue Reading

Biodegradable water-table fluid prevents corrosion, bacteria growth

December 22, 2014

LubeCorp.’s GreenCut plasma arc water-table fluid, used as a treatment for water tables in CNC plasma arc cutting systems, now is available from Rhino Cutting Systems. The biodegradable treatment prevents corrosion, bacteria growth, foaming, and hot-spotting. It is thermally stable at plasma...

Continue Reading

Short torch designed for use in 3-D plasma cutting

November 20, 2014

Hypertherm has introduced a modified HyPerformance® HPRXD® torch developed in cooperation with HGG Profiling Equipment B.V. Coupling of HGG’s pipe, box, beam, and profile cutting equipment with Hypertherm’s line of torches required a joint development effort to create a shorter,...

Continue Reading