CAD/CAM Software News

No modern fabrication shop would be complete without computer-aided design (CAD) or computer-aided manufacturing (CAM). This technology area has information on 3-D modeling, nesting, machine control, and process simulation.

Filter Content

Webinars address fabrication efficiency

November 10, 2014

SigmaTEK Systems LLC, a Cincinnati-based provider of CAD/CAM nesting and manufacturing process automation, will present two webinars in November. They are designed for shop owners, fabricators, programmers, machine operators, and production managers. “Fab Shop Automation: A single software...

Continue Reading

Tebis appoints technical support manager

November 5, 2014

Tebis America, a provider of CAD/CAM systems for the tool, die, mold, automotive, and aerospace industries, has appointed Naren Suryadevara as technical support manager. He is responsible for managing technical support for customers and developing and implementing new procedures within the...

Continue Reading

Forming Technologies hires managing director for China

October 24, 2014

Forming Technologies Inc., Burlington, Ont., a developer of software for the design, simulation, and costing of sheet metal components, has hired Jerry Zhu as managing director for China, based in Guangzhou. Zhu has more than 15 years of sales and sales management experience. He previously...

Continue Reading

SigmaTEK appoints manager for new Mexico office

October 21, 2014

Cincinnati-based SigmaTEK Systems LLC, a provider of CAD/CAM nesting, material optimization, and shop floor automation software, has appointed Sales Manager Javier Ramirez to manage its new office, SigmaTEK Systems México S.A. de C.V., located in Tijuana, Baja California, Mexico. Ramirez has...

Continue Reading

PEP Technology names account representative

October 9, 2014

Irvine, Calif.-based PEP Technology, a developer of CAM software with job quoting and automatic nesting capabilities that interfaces to several ERP and CAD programs, has hired Matt Zdinak as an account representative for its ERP/CAD/CAM software division. He has more than 14 years of sales...

Continue Reading

Jetcam presents award to NestOne Solutions

September 25, 2014

CAD/CAM software developer Jetcam Intl., Monaco, has announced that it has presented its Best Dealer Award to NestOne Solutions, Duluth, Ga., which serves the sheet metal and composite markets. The award was calculated based on overall sales, support tickets, and number of supported...

Continue Reading

Autodesk, Local Motors collaborate to apply 3-D printing

September 17, 2014

Autodesk Inc., San Rafael, Calif., has announced that Local Motors, Chandler, Ariz., will use Autodesk’s Spark open platform for 3-D printing in its development of the Strati, the world’s first 3-D-printed car. The platform will help connect automobile digital design information to the 3-D...

Continue Reading

SigmaTEK names regional sales manager for Texas and New Mexico

August 27, 2014

SigmaTEK Systems LLC, a provider of CAD/CAM nesting and manufacturing process automation in Cincinnati, has promoted Brad Stropes to regional sales manager. In this position, Stropes is responsible for increasing the company’s user community throughout Texas and New Mexico. In addition to...

Continue Reading

Tebis America moves to new location in Michigan

August 13, 2014

Tebis America, a provider of CAD/CAM software for tool, die, and mold manufacturing, has moved to a new location in Troy, Mich. The 12,000-sq.-ft. building offers nearly twice the space of the previous location and features a hands-on training...

Continue Reading

SigmaTEK announces European headquarters relocation

August 4, 2014

SigmaTEK, a supplier of CAD/CAM nesting, material optimization, and shop floor automation software, has announced the relocation of the company’s European Operation headquarters, SigmaTEK Europe Ltd. Effective immediately, the company’s new contact information is: SigmaTEK Europe Ltd., 10/11...

Continue Reading

SigmaTEK kicks off 2014 Outdoor Adventure give-away

July 15, 2014

SigmaTEK Systems LLC, Cincinnati, a provider of CAD/CAM nesting, shop floor automation, and manufacturing business automation systems, has announced the kickoff of its 2014 Outdoor Adventure give-away. North American manufacturers, fabricators, and others within the industry can enter for a...

Continue Reading

SigmaTEK announces promotions

July 8, 2014

SigmaTEK Systems LLC, a provider of CAD/CAM nesting and manufacturing process automation in Cincinnati, has announced several promotions to its product development, operations, and support teams. The employees’ new titles are: Jim Lindsey, director of product developmentBen Klinker, operations...

Continue Reading

Striker Systems announces new Canadian distributor

June 3, 2014

Striker Systems, White House, Tenn., a developer of sheet metal manufacturing systems, has named 3dSolid, Ottawa, Ont., as its newest Canadian distributor. The distributor, a CAD/CAM systems integrator focusing on metal fabrication, represents the entire Striker Systems sheet metal CAD/CAM...

Continue Reading

SigmaTEK appoints CEO of SigmaNEST GmbH

May 20, 2014

SigmaTEK Systems LLC, Cincinnati, a provider of CAD/CAM nesting and manufacturing process automation, has appointed Christoph Weber as CEO for SigmaNEST Systems GmbH, the company’s office in Dortmund, Germany. Weber is responsible for the daily operations of the office while managing sales and...

Continue Reading

SigmaTEK opens office in Germany

May 5, 2014

SigmaTEK Systems LLC, a Cincinnati-based provider of CAD/CAM nesting and manufacturing process automation, has opened a global office in Dortmund, Germany. SigmaNEST Systems GmbH provides software sales, support, training, and consulting services to fabricators throughout the region. The new...

Continue Reading