Stamping News

Whether you're using a high-speed stamping press to make simple parts at breakneck speeds or doing something really tricky, like deep drawing a material that puts up a lot of resistance, the information in this technology area is sure to help. The articles, case studies, and press releases cover stamping presses, lubricants, and materials.

Filter Content

Constellium to build automotive structure manufacturing facility in Georgia

November 30, 2015

Amsterdam-based Constellium N. V. has announced plans to construct a new facility in Bartow County, Ga., for the manufacture of aluminum automotive structures. Construction of the plant—a $20 million investment by Constellium and a $12 million investment by developer Seefried Properties—will...

Continue Reading

Ultraform Industries takes delivery of 400-ton servo press

November 25, 2015

Ultraform Industries Inc., a metal forming company in Romeo, Mich., has taken delivery of its first Aida 400-ton servo press. Production is slated to begin in January 2016. The servo can run forward and reverse without stopping and restarting, producing equal tonnage in both directions. It does...

Continue Reading

Coe Press Equipment ships first of four straighteners/reels to Metal Flow

November 18, 2015

Coe Press Equipment, Sterling Heights, Mich., has shipped the first of four orders for new straightener/reel combinations to Metal Flow, Holland, Mich., a provider of deep-drawn stamped components to the automotive industry. Each of the sets consists of a model 350, 18-in. power straightener...

Continue Reading

Miro expands stamping capabilities with 600-ton press addition

November 16, 2015

Miro Tool & Mfg. Inc., Waukesha, Wis., has expanded its stamping capabilities with the addition of a 600-ton Brown Boggs straight-side press. The machine features a 54- by 84-in. bed, 29-in. shut height, and full air cushion. The company offers a full-service, on-site toolroom, as well as...

Continue Reading

Wallover Oil appoints new regional sales manager

November 12, 2015

Strongsville, Ohio-based Wallover Oil Co., a manufacturer of metalworking fluids and industrial lubricants, has named J. Creal Waddell as regional sales manager responsible for sales in Kentucky and Tennessee. Based in Bowling Green, Ky., Waddell earned a bachelor’s degree from Western...

Continue Reading

Quintus supplies deep-draw press to Whitcraft Group

November 11, 2015

Quintus® Technologies, Västerås, Sweden, has received an order for a hydroform deep-draw press from the Whitcraft Group. The 11,600-PSI, high-pressure press will advance the production of jet engine sheet metal parts and assemblies at Whitcraft’s Eastford, Conn., facility and will serve as a...

Continue Reading

Nidec Minster becomes RIA Certified Robot Integrator

November 9, 2015

Nidec Minster Corp., a manufacturer of material forming presses and automation equipment based in Minster, Ohio, has received the RIA Certified Robot Integrator designation. To become certified, the company completed a rigorous process that included an on-site audit and testing of key personnel....

Continue Reading

Altair adds metal forming, forging software to Altair Partner Alliance

November 5, 2015

Troy, Mich.-based Altair has announced that Metal Forming Research Corporation has joined the Altair Partner Alliance (APA) with its forging software, Advisor for Metal Forming Process and Design Expert (AFDEX). Originally developed to analyze the forging process, the software now has expanded...

Continue Reading

Gemco Mfg. achieves ISO 9001:2008 recertification

November 3, 2015

Southington, Conn.-based Gemco Mfg. Co. Inc. has been recertified to ISO 9001:2008 quality standards. The company manufactures precision four-slide and progressive-die stampings, wire forms, and...

Continue Reading

Sixty-three percent of tool and die shops plan to hire apprentices

November 2, 2015

The Original Equipment Suppliers Association (OESA) and Harbour Results Inc. (HRI) have completed the fourth Automotive Tooling Barometer (The Barometer), sponsored by Die Cad Group and Expert Tech. The Barometer, which focused on the impending talent gap within the industry, indicated that the...

Continue Reading

AP&T approves fire-resistant hydraulic oil for press hardening

October 27, 2015

AP&T has announced its approval of Quaker's QUINTOLUBRIC® 888 fire-resistant hydraulic oil for use in its presses. The company has tested the synthetic oil in its press hardening lines to determine its effect on hydraulic components and gaskets. "The oil works at least as well in our lines...

Continue Reading

Schuler graduates first class of apprentices at Cedual training center in Mexico

October 27, 2015

At Schuler’s Cedual vocational training center in Puebla, Mexico, the first group of apprentices have received their leaving certificates. The newly qualified industrial and tool mechanics all passed their German Chamber of Commerce and Industry exam. They are the first skilled workers in Mexico...

Continue Reading

The Timken Co. named as winner in Humantech’s Find It – Fix It Challenge

October 23, 2015

The Timken Co. has been named a winner in the ninth annual Find It – Fix it Challenge® sponsored by Humantech Inc., Ann Arbor, Mich. The awards recognize effective workplace solutions that increase productivity, improve worker morale, and reduce workplace injuries and illnesses. The Timken...

Continue Reading

Tooling Technology Holdings acquires G.H. Tool & Mold

October 21, 2015

Tooling Technology Holdings LLC, a portfolio company of GenNx360 Capital Partners, New York, has completed the acquisition of G.H. Tool & Mold Inc., a Washington, Mo.-based company that manufactures tooling for die casters in the automotive, outdoor products, and aerospace industries. Tooling...

Continue Reading

Kenmode expands apprenticeship program

October 20, 2015

Kenmode Precision Metal Stamping, Algonquin, Ill., is expanding its formal tool- and diemaking apprenticeship program for qualified candidates who are interested in careers in advanced manufacturing. The five-year, 10,000-hour program combines paid, full-time, on-the-job training at Kenmode and...

Continue Reading