Shearing Products

Shearing, a tried-and-true technology, is still necessary in fabrication shops everywhere. Read up on the machines and blades in this technology area.

Filter Content

Scissor shears’ swiping cut action seals material edges

October 8, 2015

Kett Tool offers the KD-441 scissor shears. The unit’s swiping cut action seals the edges of the cut material, reducing the likelihood of rust or corrosion. The shears use a 5-amp, pistol-grip, variable-speed electric motor that cuts through cold-rolled mild steel up to 24 ga., wire mesh to 18...

Continue Reading

Throatless shears cut cold-rolled mild steel up to 13 ga.

September 11, 2015

Kett Tool offers the KL-2040 throatless shears for making complex straight and curved cuts in cold-rolled mild steel and stainless steel. The shears feature a 4-amp, straight-handle, single-speed electric motor that can produce shear speeds up to 2,500 RPM to cut 13-ga. cold-rolled mild steel...

Continue Reading

Double-cut shears cut metals without distortion

July 29, 2015

Kett Tool’s KL-200 double-cut shears deliver precision cuts in cold-rolled mild steel up to 18 ga. and most grades of stainless steel to 20 ga. at speeds up to 300 IPM. According to the company, the shears cut without warping or bending the original material or the finished piece. The dual...

Continue Reading

Automatic plate-processing system punches, shears simultaneously

May 13, 2015

Trilogy Machinery Inc. has introduced the new Sunrise APS fully automatic plate-processing system. It can punch and shear simultaneously. The fully enclosed system is driven by a rack-and-pinion infeed that can handle up to 40-ft. lengths of material at speeds up to 40 FPM. Standard features...

Continue Reading

Ironworker performs punching, shearing, notching

April 2, 2015

The PS 85 DP ironworker from Kaast Machine Tools Inc. has five workstations for punching, shearing, and notching. This machine has two independent cylinders allowing for dual operation, which permits parallel work on the punch and at a second workstation. This includes an electric trigger switch up...

Continue Reading

Double-cut shears cut metal without distortion

January 26, 2015

Kett Tool’s KD-400 double-cut shears are designed for cutting cold-rolled mild steel up to 18 ga., most grades of stainless steel, and aluminum up to 0.80 in. without warping or bending the original material or the finished piece. The dual blades transfer any distortion produced in cutting to...

Continue Reading

Flying shears offer +/-0.0625-in. length tolerance up to 200 FPM

January 20, 2015

The Bradbury Co. Inc. has introduced 24- and 36-in.-wide Mini B.O.S.S.™ flying shears to complement the existing 48-in. model. The 24-in. model is suitable for trim roll forming lines and standing seam lines, while the 36-in. model can be used for narrow panel lines such as corrugated and 5V...

Continue Reading

Profile shears cut corrugated metal

December 23, 2014

Kett Tool offers the KD-446 profile shears, designed specifically for cutting corrugated metal. The lightweight shears can cut cold-rolled mild steel up to 18 ga. at a radius as tight as 3 in. They also can produce cuts in soft, nonferrous metals such aluminum, copper, and brass up to 0.90 in., as...

Continue Reading

Flying shear with slitter maintains +/-0.0625-in. length tolerance at any speed

December 16, 2014

The Bradbury Co. Inc. has shipped a B.O.S.S.™ flying shear with slitter. The shear, which runs up to 250 FPM, can produce five slits of 0.048-in. prepainted steel, 0.050-in. aluminum, and 0.037-in. stainless steel. It has servo acceleration and closed-loop controls for +/-0.0625-in. length...

Continue Reading

Combination punch/right-angle shear made for short component runs

October 16, 2014

Prima Power has introduced the SGe5 Combi punch and right-angle shear. Using servo electric motors for low power consumption and low noise levels, they operate without human intervention from the blank to automated sorting. Suitable for short runs of components, the machine enables the mixing of...

Continue Reading

Plate shear system handles up to 20-ft.-long material

March 24, 2014

Trilogy Machinery Inc. offers the new Sunrise CNC plate shear infeed system for all Sunrise dual-cylinder ironworkers, including models with CNC punching. The powered infeed system can handle up to 20-ft. lengths of material. Features include a Mitsubishi servomotor, hydraulic clamping with...

Continue Reading

CNC press brake line offered -

CNC press brake line offered

June 10, 2013

The new Atlantic Blue Line program from Haco-Atlantic Inc. includes type ATP hydraulic press brakes from 50 to 300 tons with working lengths to 13 ft., type ATS hydraulic guillotine shears from 0.25 to 0.625 in. with cutting lengths to 13 ft., and a type ATT 30-ton hydraulic CNC turret punching...

Continue Reading

Plate bevellers operate at up to 10 FPM

May 23, 2013

Gullco's KBM® self-propelled plate bevelers can operate at up to 10 FPM. The bevelers use a cutter to shear the metal, helping to eliminate the HAZ and material warpage. The shearing process also eliminates the noise and sparks of grinding or flame cutting. The bevelers produce clean machined...

Continue Reading

Angle/detail machine offers technology to help optimize productivity -

Angle/detail machine offers technology to help optimize productivity

December 12, 2012

Peddinghaus Corp. has introduced the Anglemaster-HD angle/detail machine. It uses new Smart Cylinder technology that optimizes hydraulic fluid levels for accelerated production, the manufacturer reports. Equipped with two 169-ton, three-speed punch cylinders with triple tool punches and one...

Continue Reading

Punching/shearing system features standard layout marking -

Punching/shearing system features standard layout marking

October 30, 2012

Voortman has introduced the new V550-6 punching and shearing system for flat and angle steel processing. With six punches available, the system features a large-capacity hydraulic pump to make it the fastest punch in the market, according to the manufacturer. Layout marking is a standard...

Continue Reading