January 30, 2014
Precrimped woven wire mesh is a smaller part of the metal fabrication world, but it does have a significant presence in some industrial applications. This overview explains just how the mesh is created and gives metal fabricators an idea of the basic crimp styles that are available.
December 12, 2013
Editor’s Note: This article is Part III of a three-part series that reviews the die materials and die coatings used in forming AHSS. Part I, which appeared in the January/February issue, discussed the relationship between process conditions and tool failure mechanisms. Part II appeared in...
October 7, 2013
Applying a corrosion prevention product to steel isn’t enough. If the workpiece is contaminated with something as minor as fingerprints or steel fines, corrosion can get a foothold. Understanding the components that make up a corrosion cell, and how a corrosion cell works, is necessary in learning how to prevent corrosion from getting a start.
September 5, 2013
Maintaining a boiler system can be very expensive and require a lot of downtime for the equipment. The electric arc wire thermal spray process is one efficient way to create a protective overlay on boiler components and systems, helping to reduce replacement costs and outage times.
October 8, 2012
Free-machining steels shouldn’t be welded. If a fabricator has a job requiring a free-machining steel, engineers and fabricators should get together to determine the best action. Can welding be avoided by using fasteners? If not, which weldable materials exhibit acceptable machining characteristics, and do these materials meet design requirements?
September 10, 2012
At least a dozen chromium molybdenum (CrMo) steel combinations exist. One of the more recent alloys consists of chromium, molybdenum, vanadium, niobium (columbium), and nitrogen. Beginning sometime in the 1970s, this material became popular for use in high-temperature applications, such as gas and...
July 9, 2012
Chromium molybdenum alloys have characteristics that make them good choices for many products used in construction and manufacturing. This article discusses some applications for these materials and the processes and equipment necessary to complete them.
May 25, 2012
The goal when welding any material is to change its microstructure as little as possible and to preserve its mechanical and chemical properties. To achieve this you must be able to determine its weldability, control the heat input, and prevent rapid cooling.