Waterjet Cutting Products

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content

Waterjet system comes in ready-to-build kit

September 22, 2014

WARDJet offers WARDKit™ waterjet systems. Featuring the same construction and engineering as the manufacturer’s Emerald series, these machines are designed to be a cost-effective option for shops looking to add waterjet capabilities. The user builds the machine by following instructions after...

Continue Reading

Waterjet cutting system features endlessly rotating cutting head

August 6, 2014

Knuth’s Hydro-Jet 2-D waterjet cutting systems now can be equipped with an optional 5-axis cutting head for endless rotation. The compensation of the downwardly tapered cutting kerf by an adapted angular setting allows higher component accuracies for 2-D cutting with increased cutting speeds,...

Continue Reading

Diamond waterjet cutting head keeps jet stream aligned

July 9, 2014

The TRIDENT-2® diamond cutting head from Barton Intl. combines an integrated diamond design with a replaceable orifice. The precision-aligned cartridge technology helps ensure absolute alignment of the jet stream through all components of the cutting head, minimizing wear and directing maximum...

Continue Reading

Waterjet cutting system delivers up to 150 HP

July 2, 2014

Hypertherm offers the HyPrecision™ waterjet cutting system. The machine offers 15 to 150 HP. It comes with Advanced Intensifier Technology to help extend maintenance intervals, reduce maintenance time, and maximize performance, according to the manufacturer. The system is part of the...

Continue Reading

Waterjet cutting systems offered

July 1, 2014

Flow Intl. Corp. offers three Mach series waterjet cutting systems. The Mach 4c offers an expandable modular design and up to 48-ft. length. The roller pinion system provides fast cutting with zero backlash. The Mach 3 combines motion control, high-pressure components, and pump into one compact...

Continue Reading

Direct-drive waterjet pump helps minimize downtime

June 25, 2014

Flow Intl. Corp. has introduced the HyPlex® Prime direct-drive, ultrahigh-pressure waterjet pump. Combining HyperJet® intensifier pump technology with direct-drive pump efficiency, the pump is designed to increase maintenance intervals over previous models. The pump has a maximum developed...

Continue Reading

Waterjet cutting machines feature updated linear-drive systems

April 30, 2014

OMAX® Corp. has introduced the next-generation MAXIEM® waterjet cutting machines. Now categorized as JetMachining® centers, the five models feature updated linear-drive systems, a Z-axis core with optional multiaxis cutting heads and a low ceiling height, fast cutting speed, streamlined...

Continue Reading

Waterjet cuts 3-D parts from almost any material

April 15, 2014

Jet Edge’s Edge X-5 waterjet system employs an AquaVision Di controller to cut precise, taper-free parts from almost any material. The 5-axis system can cut 3-D parts such as impellers and bevels up to 50 degrees. With the motion system separated from the catcher tank, vibration is eliminated....

Continue Reading

Abrasive waterjet machine suitable for fabrication shops

March 17, 2014

OMAX® Corp. offers the MAXIEM® 1530 abrasive waterjet machine. It has an XY cutting travel of 10 ft. 2 in. by 5 ft. 2 in., making it suitable for fabrication shops and metal service centers. Featuring Intelli-MAX® software and direct-drive pump technology, the machine cuts parts from...

Continue Reading

Lab-grown waterjet orifice withstands harsh abrasive

March 6, 2014

Diamond Technology Innovations has introduced a new orifice material for the waterjet cutting and cleaning industries. The tetraCORE™ lab-grown waterjet orifice can maintain structural integrity and jet-stream coherency for hundreds of hours in harsh abrasive environments, according to the...

Continue Reading

Waterjet systems include 5-axis cutting heads for chamfering up to 50 degrees

February 12, 2014

Knuth Machine Tools offers full 5-axis waterjets in flying-bridge and traditional gantry designs. The 5-axis cutting head allows for chamfering up to 50 degrees, coupled with endless rotation, which eliminates the need to repeat pierce-cuts. The manufacturer’s 450 Cut Control has a waterproof...

Continue Reading

Small scale waterjet system

Small-scale waterjet systems save floor space

January 27, 2014

WardJet has introduced two new models to its Emerald series of waterjet cutting systems. At 2 by 2 ft., the Emerald 0606 is the smallest waterjet manufactured by the company. Because of its rigid, sturdy tank design, it can handle materials from 2-in. foam sheet to 12-in.-thick stainless...

Continue Reading

Waterjet's cutting area almost same size as machine

January 10, 2014

TECHNI Waterjet™ has introduced the Techjet-X3® 4100-G gantry-style waterjet cutting system. The machine's cutting area (6 ft. 7 in. by 13 ft. 2 in.) is nearly the same size as the machine (7 ft. 10 in. by 14 ft. 5 in.), helping to save facility space. The waterjet machine comes...

Continue Reading

Waterjet cutting system's small size contributes to energy efficiency - TheFabricator.com

Waterjet cutting system's small size contributes to energy efficiency

December 12, 2013

Sugino Corp. has introduced the Katana2 waterjet cutting system for cutting titanium, stainless steel, and copper. Utilizing an extra-fine abrasive nozzle, the machine can achieve cutting diameters as low as 0.012 in. at pressures up to 43,500 PSI. With a footprint of 57 by 81 in., the machine...

Continue Reading

Plasma cutting system, waterjet system introduced

December 3, 2013

Hypertherm has introduced the new Powermax125 plasma cutting and gouging system. According to the company, the system delivers the most power of any portable air plasma system currently available. The machine features a 1.5-in. recommended cut capacity. It can sever 2.5-in.-thick metal while...

Continue Reading