Bending News

The bending technology area includes all manner of machines and processes for bending sheet metal, including press brakes, folders, panel benders, corner formers, ironworkers, notchers, orbital formers, and roll benders. It also has information on accessories such as gauging and backgauging systems.

Filter Content

DeWys Mfg. adds panel bending capabilities

April 25, 2016

Precision metal fabricator DeWys Mfg. Inc. has added a Salvagnini P2-Lean panel bender at its facility in Marne, Mich. The machine features an automatic tool changer, Mac (material attitude correction) 2.0, and electric-driven actuators. Its upper and lower bend blades allow bends from -135 to...

Continue Reading

EVS Metal acquires power press brake with automation

April 14, 2016

Metal fabrication, machining, and finishing shop EVS Metal Inc. has added an Amada EG 6013 power press brake with automation to its Riverdale, N.J., manufacturing facility. The machine uses a 6-axis robot that automatically sets itself up with the correct tools to create the required bends, even in...

Continue Reading

Mac-Tech to host press brake bending seminar May 19-20

April 13, 2016

Mac-Tech Inc., a metal fabricating equipment distributor and service provider, will host a 1½-day press brake bending seminar, taught by bending guru Steve Benson, May 19-20 at its headquarters in Milwaukee. The event will include live demonstrations and technical presentations on press brake...

Continue Reading

Trilogy Machinery named exclusive North American distributor for SweBend

March 24, 2016

Trilogy Machinery Inc., Belcamp, Md., has been appointed as the new exclusive North American distributor for SweBend angle and section bending rolls, plate rolls, and specialty machinery. The entire staff at SweBend, based in Hässleholm, Sweden, comprises former employees from Roundo, also in...

Continue Reading

Davi delivers angle roll to steel fabricator

March 4, 2016

Davi has announced that a large steel fabricator in Germany has installed a Davi angle roll for bending beams up to 10 by 8 in. and pipes. The company previously purchased two plate rolls for bending plates up to 25/32...

Continue Reading

Wilson Tool to host Press Brake Training & Technology Summit on April 6

February 25, 2016

Wilson Tool Intl., a manufacturer of tooling systems for punch presses, press brakes, and punch and die components for the stamping industry, will hold a free Press Brake Training & Technology Summit on Wednesday, April 6, 9:00 a.m. to 4:00 p.m., at its headquarters in White Bear Lake, Minn....

Continue Reading

JMT USA names Midwestern regional sales manager

January 29, 2016

Salt Lake City, Utah-based JMT USA, a provider of metal fabrication machinery including high-precision press brakes and plate rolls, has hired Ron Backhaus to serve as Midwestern regional sales manager. Backhaus has focused mainly on plate rolls in the metal forming industry since 2004. Before...

Continue Reading

Lang Tube Tec names International Technologies as U.S. partner

January 12, 2016

Lang Tube Tec GmbH, a manufacturer of electric tube and pipe bending machines based in Germany, has selected International Technologies Inc., Schaumburg, Ill., as a U.S. sales and service partner. Lang Tube Tec provides a variety of bending machines for carbon steel, stainless steel,...

Continue Reading

EHRT North America to distribute EHRT Maschinenbau products

January 5, 2016

EHRT North America, affiliate of Mid Atlantic Machinery Inc. and Southern States Machinery Inc., has assumed distribution of EHRT Maschinenbau GmbH products, including punching and bending machines for copper busbar, in North America. EHRT North America is administered from Harrisburg, Pa. Karl...

Continue Reading

ShelterLogic acquires Arrow Sheds

December 15, 2015

Engineered shelter manufacturer ShelterLogic, based in Watertown, Conn., has acquired Arrow Sheds LLC, Breese, Ill., a manufacturer of outdoor steel storage sheds. Arrow also has production/distribution facilities in Haskell, N.J., and Fontana, Calif., as well as international sales management...

Continue Reading

Pacific Press Technologies celebrates 70th anniversary

December 14, 2015

Pacific Press Technologies Inc., Mt. Carmel, Ill., celebrates its 70th anniversary in 2015. The company began during World War II by building the first hydraulic press brake in the U.S. Today the company offers presses, press brakes, and shears for hydraulic metal...

Continue Reading

Unison installs electric bender for forming carbon steel pipes up to 10 in. dia.

December 2, 2015

Unison Ltd. has installed what it says is the world’s largest and most powerful all-electric pipe bending machine at Westcon Yard AS, a Norway-based offshore and maritime services company. Capable of generating 660,000 Nm of continuous, servo-controlled torque, the custom-designed machine will be...

Continue Reading

Albina Co. adds induction heating capabilities

September 24, 2015

Albina Co. Inc., a bender of pipe, tube, structural steel, and plate located in Tualatin, Ore., now offers induction heating capabilities. The company has used heat to bend materials for decades, using alternatives to the actual process of induction heating. Now it is applying an induction heat...

Continue Reading

Estes expands manufacturing space, adds panel bender

August 21, 2015

Estes Design & Mfg., Indianapolis, is adding 35,000 sq. ft. of manufacturing space to accommodate demand for sterilization cases and trays. The expansion, scheduled for completion by the end of August 2015, also will provide room for more medical production equipment to accommodate the continued...

Continue Reading

CenterLine celebrates 20 years in business

July 22, 2015

CenterLine Precision Tube Bending, Dublin, Calif., marks its 20th anniversary in 2015. The company provides mandrel tube bending, roll bending, coiling, wire-rod forming, swaging, expanding, flaring, beading, grinding, machining, annealing, furnace/induction brazing, and...

Continue Reading