Hydroforming Products

Hydroforming isn't as mysterious as it seems. This technology area is full of articles, including case studies, on hydroforming sheet metal and tubular sections.

Filter Content

Software offers springback compensation in tube hydroforming

February 8, 2016

AutoForm Engineering GmbH offers AutoForm Hydro 2016 software for rapid tool design for tube hydroforming processes and simulation of these processes. It includes new functionalities for springback compensation after bending and hydroforming operations. The bending compensation is achieved...

Continue Reading

Deep-draw hydroforming presses updated with integrated tool change

November 18, 2015

Beckwood Press Co. has introduced the 20-10-10BD, 25-10-12BD, and 32-10-12BD deep-draw hydroforming presses. Updates to the pressure-containment system have resulted in improved cycle times while maintaining the company’s “infinite life” structural standards. In addition, each deep-draw...

Continue Reading

Deep-draw sheet hydroformer offers cycle times less than 30 sec.

June 25, 2015

Beckwood has introduced the Triform 20-10-10BD, a 10,000-PSI, deep-draw sheet hydroforming press. It features a 20-in.-dia. maximum blank size and 10-in. draw depth capacity. With cycle times of less than 30 sec. and a quick tool change system, the compact press allows manufacturers to form...

Continue Reading

Deep-draw sheet hydroforming press handles up to 20-in.-dia. blanks

June 18, 2015

Beckwood has expanded its Triform product line with the addition of a 10,000-PSI deep-draw sheet hydroforming press, featuring a 20-in.-dia. maximum blank size, 10-in. draw depth capacity, and an integrated tool change system for fast changeover. The model 20-10-10BD offers cycle times less than...

Continue Reading

Design, prototype, production services offered for hydroformed parts

May 19, 2015

Excella Technologies provides part and tool design, prototype, and production services for hydroformed and other tubular parts. The company focuses on fluid-carrying and structural parts for such industries as agriculture, construction, commercial truck, and automotive, using stainless, mild, and...

Continue Reading

Fluid cell sheet hydroforming press made for low-volume, high-mix applications

April 3, 2015

Beckwood offers the Triform model 2496-5BD fluid cell sheet hydroforming press for forming a variety of part sizes in low-volume, high-mix environments. It offers a maximum of 5,000 PSI of evenly distributed forming pressure. The press comes with a single bed shuttle or dual shuttles with front and...

Continue Reading

Software simulates tube hydroforming processes

July 15, 2014

AutoForm Eng. GmbH has unveiled its AutoForm Hydro 2014 software for rapid tool design and simulation of tube hydroforming processes. The software allows users to carry out a complete, virtual tryout of the hydroforming process, which involves such steps as bending, preforming, hydroforming,...

Continue Reading

Hydroforming press designed for high-volume production

April 7, 2014

Interlaken Technology has introduced a new four-column hydroforming press system for running high-volume production. It is available in clamp forces from 250 to 5,000 tons. The multichannel, closed-loop control system can be programmed to handle various sizes and materials. It also offers...

Continue Reading

Hydroforming press available in clamp forces from 250 to 5,000 tons

February 24, 2014

Interlaken Technology has introduced a four-column hydroforming press system for running high-volume production. It is available in clamp forces from 250 to 5,000 tons. The multichannel, closed-loop control system is programmed to handle various sizes and materials. It also offers dynamic mode...

Continue Reading

Hydroforming machines form without surface pattern distortion

October 28, 2013

FluidForming Americas has introduced its FormBalancer line of hydroforming machines to the North and South American marketplace. The machines impart friction-free metal distortion on the water-only exposed side of the part, and clamping and forming pressures can vary throughout the part creation...

Continue Reading

Four-column hydroforming press designed for high-volume environments

June 26, 2013

Graebener-Reika Inc. has announced the availability of a new four-column hydroforming press through its parent company, Graebener Maschinentechnik. The system is suitable for high-volume environments, such as the automotive industry. The presses are available in closing forces from 800 to 5,000...

Continue Reading

Tray-style sheet hydroforming presses made in U.S. - TheFabricator.com

Tray-style sheet hydroforming presses made in U.S.

March 5, 2012

Triform has announced that two of its tray-style sheet hydroforming presses are the first of their kind manufactured in the U.S. in more than 30 years. The fluid cell presses use high-pressure hydraulic fluid in a flexible rubber bladder to form sheet metal using a single tool. The presses...

Continue Reading

Long-part-capable hydroform presses are portable

August 11, 2009

Pryer Technology Group offers Triform BD series hydroform presses. The long-part-capable machines are portable, weighing as low as 14,000 lbs. The 1632-5 model requires just 72 sq. ft. of floor space without any need for a pit or special foundation.The presses generate 5,000 PSI, which helps...

Continue Reading

Hydraulic presses, hydroforming systems can be custom made for almost any industry

September 16, 2008

The Beckwood Press Co. offers hydraulic presses and automated systems, available from 2 to 2,000-plus tons; benchtop presses from 2 to 50 tons; and servo-motion presses from 2 to 150-plus tons. These presses can be made for almost any industry, with various capabilities and options.The company's...

Continue Reading

Hydroforming press suitable for production, materials research applications

July 15, 2008

Interlaken Technology Corp. offers hydroforming press systems for use in production and materials research applications. The computer-controlled hydraulic press systems, which incorporate data acquisition, are designed to hydroform tube and sheet.The press systems are equipped with the company's...

Continue Reading