Sawing Products

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content

Circular cold saw offers speed of abrasive saw

February 26, 2015

Pat Mooney Saws has introduced the Saturn circular cold saw. According to the manufacturer, the saw offers the speed of an abrasive saw and the capacity of a traditional band saw. With its cutting accuracy, squareness, large capacity, and pivoting saw, the machine is suitable for a variety of...

Continue Reading

Extra features added to horizontal band saw

January 22, 2015

Behringer has added more standard features to its HBE Dynamic series horizontal band saws. The saws now include automatic precision servo downfeed control and blade protection sensor technology. A sensor-driven cutting pressure control is located at the back of the saw blade. Positioning the...

Continue Reading

Heavy-duty cutoff saw system

January 5, 2015

TigerStop has introduced TigerSaw Ferrous, a fully automated, heavy-duty, precision ferrous metal cutoff saw and push feed. The column saw has mitering capabilities from 60 degrees left to 45 degrees right. The system is designed to cut tube, pipe, and barstock up to 42 ft. long. Features...

Continue Reading

Carbide-tipped saw blade handles austenitic stainless steel tube

November 26, 2014

Kinkelder offers Connexxioncut 4 (CX4) carbide-tipped saw blades for cutting of 300 series stainless steel tubes from 0.12 to 0.24 in. thick. Based on a constant cutting speed of 262.47 FPM and constant tooth load of 0.002 in./tooth, the blades cut 2.36- by 0.16-in. tube in less than 4 sec.,...

Continue Reading

Tungsten carbide-tipped circular saw blades designed for tube and pipe cutting

November 25, 2014

New-Form Tools has added tungsten carbide-tipped (TCT) circular saw blades to its metal cutting product line. The blades are designed to address the specifications of the tube and pipe industry. The blades, which produce a burr-free cut through steel materials, are coated for up to 4 to 10 times...

Continue Reading

Metal saws leave workable edge

November 25, 2014

Fein Power Tools Inc. has introduced three new Slugger saw models that leave a workable edge when making straight or bevel cuts up to 45 degrees on steel plate, angle, pipe, and square or round tube. The new 7.25-in. metal hand cutting saw has a double-insulated, 1,400-W, 120-V, 12-amp,...

Continue Reading

Blade drive updated on vertical tilt-frame band saw

November 20, 2014

Marvel Mfg. Co. has made changes to its 8-Mark-II vertical tilt-frame band saw. In addition to a new powder coating and paint color scheme, the saw features a blade drive upgraded from a 2- to 5-HP motor and controlled with a variable-frequency drive. The blade speed control dial has moved from the...

Continue Reading

CNC hitch feed automatic saw maintains length tolerance of +/-0.006 in. per index

October 30, 2014

The CPO 315 HFA CNC hitch feed automatic saw from Scotchman is fully programmable. It cuts tube and pipe up to 3.5 in. dia. and solid material up to 1.75 in. while maintaining a length tolerance of +/-0.006 in. per index. According to the manufacturer, the first part cut is always accurate. The...

Continue Reading

Nonferrous cross-cutting system puts large-shop automation in reach

October 28, 2014

TigerStop’s TigerSaw 1000 is a fully automated and integrated cross-cutting system for aluminum and other nonferrous metals. It features a heavy-duty build, 18-in. saw paired with a pusher system for single-piece flow or pack sawing applications up to 26 ft. The system uses Dynamic...

Continue Reading

Heavy-duty cutoff saw system automates push feed

October 17, 2014

TigerStop has introduced TigerSaw Ferrous, a fully automated, heavy-duty, precision ferrous metal cutoff saw and push feed. The column saw has mitering capabilities from 60 degrees left to 45 degrees right. The system is designed to cut tube, pipe, and barstock up to 42 ft. long. Features...

Continue Reading

Upcut saw made for nonferrous metal

October 9, 2014

Scotchman Industries® has introduced the SUP-600 NF upcut circular cold saw for cutting nonferrous material. Its 24-in., 132-tooth carbide blade can produce round cuts up to 9 in. dia. and rectangular cuts up to 15 by 6 in. Standard features include an adjustable feed rate; mitering capability...

Continue Reading

Cold saw can be programmed to control volume production work

September 19, 2014

The Kalamazoo Machine Tool model C370 A-NC cold saw features a pedant-mounted NC console with soft-touch controls for setup and sawing operations, including height/depth controls for saw cycling and high productivity in volume production work. The saw is engineered with a heavy-duty vertical...

Continue Reading

Catalog highlights saws, sanders, grinders

September 17, 2014

Kalamazoo Industries offers an updated catalog of its abrasive saws, sanders, and grinders, including new additions to the line of abrasive cutoff saws. The saws include the model K12-14MS metallurgical saw that produces mirror-surface cuts, the model K26E large-capacity abrasive saw designed for...

Continue Reading

Metal cutting band saw offers high cutting capacity with space-saving design

August 28, 2014

MetalMizer has introduced the new MV2018 metal cutting band saw. The space-saving saw is designed to offer the same or greater cutting capacity of other saws in its class with 30 percent less machine depth, the company states. The motor drive system is mounted directly on the cutting head,...

Continue Reading

Circular saw blades cut carbon steels, mild alloys

August 26, 2014

LENOX® has entered the circular saw market with the launch of the CircTech™ Precision platform. It features a tensioning system that allows the blade to maintain plate flatness and tight tolerances, the company states. The tooth design and blade construction reduce vibration and stress risers to...

Continue Reading