Tube and Pipe Production Products

The tube and pipe production technology area encompasses mills and all of the equipment that makes a mill run successfully: tooling, welding units, nondestructive testers, bundlers, scarfing equipment, straighteners, scrap choppers, and washing systems.

Filter Content

Heavy-duty mill-type cylinders meet ISO 6022 specs

May 5, 2014

Peninsular Cylinder Co. Inc. builds heavy-duty mill-type cylinders to ISO 6022 specifications for destructive applications such as foundries and stamping plants. Metric and English dimensions are available with position-feedback sensing, including linear transducers. Cylinder bores are up to 20...

Continue Reading

Automated tool change system helps cut changeover time on tube sizing machine

February 24, 2014

AddisonMckee has developed an automated tool handling system for a customer forming tube from 2 to 6 in. dia. The tool sets used in the customer’s AddisonMckee HG150-IDOD tube sizing machine can weigh up to 300 lbs., so loading and unloading previously involved the use of an overhead crane...

Continue Reading

Large-screen TV system displays tube manufacturing process

February 4, 2014

A new camera-controlled, fully electric tube manufacturing cell from transfluid® Maschinenbau GmbH includes a large-screen TV displaying energy consumption, the CPK value, the number of tubes that have been processed so far, and the component being produced. The manufacturing system also...

Continue Reading

End mill delivers high-rate metal removal for titanium roughing at low torque

December 10, 2013

5ME's CYCLO CUT® Max-Flute end mills enable machining of internal structures in titanium, INCONEL® alloy, and stainless steel components with removal rates of up to 12 cu. IPM at 45 ft.-lbs. of torque. The 20-flute end mills use shallow, radial widths of cut to transfer less heat to the cutting...

Continue Reading

Forming presses designed for large-diameter line pipe - TheFabricator.com

Forming presses designed for large-diameter line pipe

October 29, 2013

Graebener-Reika Inc. offers Graebener Maschinentechnik pipe forming presses for producing large-diameter line pipe used in pipeline and utility distribution systems. The presses are suited for producing pipes with increased yield points and large wall thickness-to-pipe-diameter ratios, where the...

Continue Reading

Cutoff blades cut cleanly to produce dimple-free tube sections - TheFabricator.com

Cutoff blades cut cleanly to produce dimple-free tube sections

October 16, 2013

Engineered for the metal tube, pipe, and roll forming production industries, new tube cutoff blades from Hyde Industrial Blade Solutions are designed to produce dimple-free tubes far down the line. The vacuum heat-treated, precision-ground, high-speed steel blades are available in a variety of...

Continue Reading

Notcher makes 90-degree joints on both ends of tube in single cycle - TheFabricator.com

Notcher makes 90-degree joints on both ends of tube in single cycle

October 16, 2013

Innovo Corp. has introduced the Generation II line of H237DN-D hydraulic double end-notching systems for high-volume notching applications producing 90-degree joints on both ends of tubing or pipe in a single cycle. The unit has a capacity of 2-in. Sch. 40 pipe. It can be adjusted to accept...

Continue Reading

Linear cage forming tube mills produce variety of sizes without roll changes - TheFabricator.com

Linear cage forming tube mills produce variety of sizes without roll changes

October 8, 2013

Olimpia 80 has produced linear cage forming tube mills for a customer producing square and rectangular tube sections in carbon steel material. One of the lines produces square sections from 1.18 by 1.18 in. to 3.15 by 3.15 in. and rectangular sections from 1.57 by 1.18 in. to 4.43 by 1.18 in.,...

Continue Reading

Process demagnetizes large pipes

May 16, 2013

Schuler, in cooperation with Maurer Magnetic, has developed a process that can demagnetize large pipes during their production. According to the manufacturer, this improves weld quality, enabling pipelines to withstand much greater pressures. In the patented process, the welded pipes are pushed...

Continue Reading

Weld squeeze box handles HSLA steel pipe to 4.5 in. OD - TheFabricator.com

Weld squeeze box handles HSLA steel pipe to 4.5 in. OD

April 2, 2013

Rafter Equipment Corp. has completed an RT-4500 weld squeeze box for an API pipe producer. The box is sized for HSLA steel pipe up to 4.5 in. OD by 0.262 in. wall. The design includes push-on-center squeeze roll adjustments, high-capacity tapered roller bearings within the roll tools, and...

Continue Reading

Turnkey systems produce spirally welded, longitudinally welded large pipe

July 16, 2012

Schuler offers turnkey systems for large-pipe production, designed to meet demand in natural resource extraction applications. Systems for producing spirally welded and longitudinally welded pipes are available. For the production of spirally welded large pipes, both online and offline processes...

Continue Reading

Hot sizing mill handles API pipe - TheFabricator.com

Hot sizing mill handles API pipe

February 20, 2012

Brandt Engineered Products Ltd. has introduced a new hot sizing mill to accommodate a variety of specifications. Designed for maximum throughput, it is equipped with three stands positioned 90 degrees to each other that are adjustable electronically from the operator’s station. Each roll...

Continue Reading

Seam monitoring device designed for high-frequency longitudinally welded tube production

April 12, 2010

Blissenbach has introduced a seam monitoring device used in combination with ID scarfing tools for the production of high-frequency longitudinally welded tubes. The product monitors cutting edge...

Continue Reading

Tube straightening machine incorporates multiple bending feature

February 9, 2010

Bronx/Taylor-Wilson offers the 10.CR.5 cross-roll tube straightening machine. The 10-roll design can straighten to stringent tolerances at high speeds, according to the company. The machine...

Continue Reading

Flying tube shear introduced

April 14, 2009

Haven Mfg. has introduced the Haventrak™ Flying Shear for tube cutting. It combines a dual-blade shear cutoff head with a U-Trak length control system from Universal Controls Group to deliver...

Continue Reading