Aluminum Welding Products

Filter Content

Aluminum GMAW guide updated

June 1, 2016

Lincoln Electric has released an updated guide for aluminum GMAW. The manual features a new, reader-friendly layout with updated information and photos of products and processes. The guide offers a detailed look at filler metal types, filler metal selection considerations for welding, tips for...

Continue Reading

Resistance welding control features MFDC programming capabilities

May 23, 2016

The new Matuschek 1,000-Hz MFDC SPATZ+ is a modular resistance welding power supply and timer that can be configured for various purposes by changing or adding plug-in circuit boards. It can be used as a single weld gun controller, a multigun controller, a servo gun controller, and a master/slave...

Continue Reading

Push/pull drive made for aluminum GMAW

August 24, 2015

Dinse Inc. offers a push/pull drive system for GMAW of aluminum. The lightweight system features a four-roll drive system for positive wire feeding of even soft aluminum (4043) and small-diameter wires. The plug-and-weld system offers simple connection and installation. The compact design helps...

Continue Reading

Welding system designed for aluminum autobody repairs

March 25, 2015

Miller Electric Mfg. Co. has introduced the Millermatic® 350P aluminum autobody repair system. The welding package is designed to address the challenges posed by welding thin-gauge aluminum, such as warping, distortion, and burn-through. The system features the components necessary to meet the...

Continue Reading

Electrode welds aluminized material

January 15, 2015

Select-Arc Inc. has introduced Select FP 409Ti, a composite metal-cored electrode designed for welding ferritic stainless steel, particularly on thin-section, aluminized material. Titanium acts as the stabilizing agent to provide oxidation and corrosion resistance. The electrode provides a...

Continue Reading

Aluminum GMAW push-pull welding system targets truck trailer manufacturing

June 10, 2014

The POWER MIG® 350MP Trailer Manufacturing One-Pak™ from Lincoln Electric provides push-pull wire feeding capability for trailer manufacturing sheet metal applications. The multiprocess package includes a Magnum® PRO AL air-cooled, push-pull gun; aluminum drive roll kits; SuperGlaze 5356...

Continue Reading

Welding system module allows welding process customization -

Welding system module allows welding process customization

November 18, 2013

The Lincoln Electric Co. has introduced the Power Wave® Advanced module with AC welding capability to run aluminum processes. The welding system module performs several processes: SMAW, GMAW, pulsed GMAW, GTAW, and Surface Tension Transfer® (STT®). STT is a controlled GMAW...

Continue Reading

Welding gun made for aluminum, pulsed GMAW -

Welding gun made for aluminum, pulsed GMAW

September 25, 2012

Miller has introduced the new XR™-Pistol-Pro gun built for aluminum GMAW and pulsed GMAW in heavy industrial applications such as truck and trailer manufacturing, shipbuilding, emergency and recreational vehicle manufacturing, and general fabrication. Compatible with the company's XR-S/D...

Continue Reading

Current contacting system prolongs torch life

May 17, 2012

Fronius has introduced the second generation of its Contec MD current contacting system. According to the company, in automated welding of aluminum and steel, it extends the endurance time of the torch from five to 15 times compared to a conventional nozzle. It also features high process stability...

Continue Reading

Aluminum welding machine incorporates pulsed GMAW capabilities -

Aluminum welding machine incorporates pulsed GMAW capabilities

December 6, 2011

Miller Electric Mfg. Co.'s new AlumaPower™ 450 MPa is a dedicated aluminum welding machine with built-in synergic pulsed GMAW capabilities designed to help increase power while maintaining ease of use. The machine, rated at 450 amps at 100 percent duty cycle, offers a simple interface and...

Continue Reading

Wire feeder/welding machine designed for GMAW, FCAW on mild steel, stainless steel, aluminum

March 23, 2010

Lincoln Electric has updated its POWER MIG® 216 wire feeder/welding machine line with the new 216 model for GMAW and FCAW on mild steel, stainless steel, and aluminum. The machine, which provides 30 to 250 amps, arrives spool gun-ready, allowing welders switch quickly to aluminum wire welding...

Continue Reading

Push-pull welding guns designed for aluminum fabrication, production welding environments

January 12, 2010

Lincoln Electric has introduced two push-pull welding gun models for aluminum fabrication and production welding environments.The Panther™ semiautomatic, gooseneck-style gun provides smooth wire feeding with dual-driven rolls for added pulling power without damaging the wire. It also features...

Continue Reading

Aluminum filler metals meet AWS Specification A5.10

May 12, 2009

Hobart Brothers has added two new lines of aluminum solid welding wires and GTAW cut lengths to its McKay® brand of filler metals. The company joined in a strategic relationship with Maxal Aluminum to offer the new products.Smootharc™ 5356 is a magnesium-based alloy that provides good...

Continue Reading

Arc welding technology to be showcased at FABTECH

September 16, 2008

Miller Electric Mfg. Co. offers a variety of equipment for arc welding that will be on display at the 2008 FABTECH International & AWS Welding Show.The PipePro system, suitable for field and shop fabrication, features the company's RMD (Regulated Metal Deposition) process, a precisely controlled...

Continue Reading

Aluminum welding resource guide available from AWS

May 13, 2008

The American Welding Society (AWS) has published a resource manual entitled...

Continue Reading