Waterjet Cutting Products

Filter Content

Aftermarket waterjet cutting system parts offered

March 21, 2017

Barton Intl. now offers aftermarket parts for Flow® waterjet cutting systems. The company also offers Genuine Flow® OEM parts, as well as garnet abrasives from other manufacturers, the company...

Continue Reading

Waterjet system produces taper-free finish

December 13, 2016

Jet Edge’s EDGE X-5® 5-axis waterjet system produces chamfers, weld bevels, and 3-D parts with a taper-free finish from almost any material. The design separates the motion system from the catcher tank, eliminating vibration. Features include a ball-screw drive; direct-couple AC, brushless...

Continue Reading

Waterjet intensifier pump features integral hydraulic reservoir

December 5, 2016

Jet Edge offers the xP90-100 waterjet intensifier pump. The all-steel welded frame includes a hinged cover and removable access panels for machine inspection and maintenance. Features include an integral hydraulic reservoir; high-efficiency TEFC motor; electronically shifted intensifiers; Wye-Delta...

Continue Reading

Brochure highlights precision waterjet cutting systems

November 21, 2016

Jet Edge Inc. has published a new precision waterjet cutting systems brochure that features industrial-grade waterjet gantries, ultrahigh-pressure waterjet pumps, and waterjet parts and accessories. The literature also explains the company’s custom engineering...

Continue Reading

Waterjet cutting system cuts more than 750 IPM

November 8, 2016

WARDJet has introduced the E-2040 midsize waterjet cutting machine for 2-D and 3-D cutting. It has a 6- by 12-ft. cutting envelope capable of handling a variety of common sheet sizes. The new crossbeam design allows cutting speeds to reach more than 750 IPM. Almost any cutting head configuration,...

Continue Reading

CAD/CAM waterjet software offered

September 22, 2016

Flow Intl. Corp. has introduced FlowXpert 2016® CAD/CAM waterjet software for 3-D pathing and cutting. The software integration was engineered in partnership with Ansys SpaceClaim™. Incorporating application tips, material cut speed knowledge, improved pathing algorithms, and expanded...

Continue Reading

Waterjet pumps deliver 90,000 PSI

September 19, 2016

KMT Waterjet Systems Inc. has introduced the KMT Streamline® PRO-III 90,000-PSI series waterjet pump in 125- and 60-HP models. New features include a patented metal-to-metal seal design and patented SUPRAlife metal canister to protect UHP seals. The pumps accommodate a range of applications,...

Continue Reading

Waterjet mini hopper allows operators to adjust abrasive flow

September 1, 2016

Jet Edge Inc. has introduced the new Permalign® V-series mini hopper for abrasive waterjet cutting. The variable-aperture unit allows waterjet operators to make adjustments to abrasive flow, minimizing abrasive consumption. The water-resistant design helps prevent abrasive clogs that can cause...

Continue Reading

Waterjet system cuts 3-D parts, bevels to 50 degrees

August 1, 2016

Jet Edge’s EDGE X-5® 5-axis waterjet system is designed and built for heavy-duty industrial use. The system is available in sizes up to 24 by 13 ft., making it suitable for use in metal service centers for cutting bevels for weld preparation, cutting parts to near net shape, cutting exotic...

Continue Reading

Waterjet cutting system cuts up to 500 IPM

July 26, 2016

Koike Aronson offers the K-Jet abrasive waterjet cutting system. It delivers cut speeds up to 500 IPM with standard cutting areas up to 72 by 144 in. and a table capacity up to 125 lbs./sq. ft. (3 in. mild steel). Features include Hypertherm Hy-Precision 60,000-PSI intensifier pumps, Flash-Cut...

Continue Reading

Midrail gantry waterjet system runs up to four cutting heads

July 5, 2016

Jet Edge has introduced a new-generation midrail gantry waterjet system. Designed for heavy-duty, 24/7 use in industrial environments, the machine can operate up to four abrasivejet or water-only waterjet cutting heads. The system holds +/- 0.001-in. linear positional accuracy (over 12 in.) per...

Continue Reading

Shuttle allows waterjet operators to keep cutting while unloading parts

June 20, 2016

Jet Edge has introduced its latest generation of waterjet shuttle systems. Designed for high-volume, water-only waterjet cutting applications, the shuttles allow operators to continue cutting as they unload finished parts. The shuttles are available in a high-rail gantry format supporting up...

Continue Reading

5-axis waterjet cuts 3-D parts, bevels to 50 degrees

February 24, 2016

Jet Edge’s EDGE X-5® 5-axis waterjet system is designed and built for heavy-duty industrial use. It cuts 3-D parts such as impellers and bevels up to 50 degrees. The design separates the motion system from the catcher tank, eliminating vibration and helping to ensure part quality. The...

Continue Reading

Robotic waterjet cutting cell produces weld test samples from automotive components

December 22, 2015

WARDJet has integrated its abrasive waterjet cutting system with a Motoman robotic arm for producing weld test samples from automotive components. The Weld Test Robot-4S cell features four independent trays or shuttles to load parts into the robot’s cutting area. Each station features...

Continue Reading

Waterjet abrasive management system removes, recycles abrasive

December 18, 2015

Hypertherm has introduced a waterjet abrasive management system comprising two products: the PowerDredge™ abrasive removal unit (available now) and the EcoSift™ abrasive recycling unit (available in 2016). Testing and microscopic analysis shows up to 60 percent of abrasive sitting at the...

Continue Reading