Plasma Cutting News

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content

Hypertherm celebrates 40th anniversary

July 15, 2008

Hypertherm Inc., Hanover, N.H., a manufacturer of plasma arc metal cutting technology, celebrated its 40th anniversary in June.The events began with Hypertherm founder Dick Couch and Vice President of Human Resources Barbara Couch celebrating with the company's associates and customers in Mexico...

Continue Reading

Koike installs Thermal Dynamics plasma cutting machines

July 15, 2008

Koike-Aronson Inc., Arcade, N.Y., recently installed AutoCut and UltraCut plasma cutting systems from Thermal Dynamics, St. Louis, at its training facilities in Arcade and Houston. Koike trained all of its U.S. and Canadian sales and technical personnel on the cutting systems, which are suitable...

Continue Reading

ITT Corp. acquires Kaliburn

May 15, 2008

ITT Corp., White Plains, N.Y., recently acquired Kaliburn Inc., Charleston, S.C.ITT Corp. is an engineering and manufacturing company that employs approximately 40,000 people and has customers in more than 50 countries. The company completed the acquisition through its wholly owned subsidiary,...

Continue Reading

MG Systems & Welding expands

February 12, 2008

MG Systems & Welding Inc., Menomonee Falls, Wis., a manufacturer of thermal cutting machines, has expanded its facilities for the second time in a year.The first addition, completed last summer, increased office space. The new project will add 60 ft. by 238 ft. to the south side of the plant. The...

Continue Reading

Arc-Zone.com names director of operations

February 12, 2008

Arc-Zone.com® Inc., Carlsbad, Calif., has named Scott Reiman as director of operations.Reiman has more than 10 years of experience in accounting, sales, and customer service management. Before joining the company he served as controller for a midsize construction company, as manager of customer...

Continue Reading

New Miller Web page connects visitors to welding resources

January 15, 2008

Miller Electric Mfg. Co.'s new Industries and Interests Web page, located at www.millerwelds.com/interests, organizes the information available on the Appleton, Wis., company's Web site into nine categories: Manufacturing, Fabrication, Construction, Service Truck, Welding Instructors, Motorsports,...

Continue Reading

FABTECH hosts 31,000 visitors, covers 461,627 sq. ft.

January 15, 2008

The 2007 FABTECH® International & AWS Welding Show at McCormick Place in Chicago hosted more exhibiting companies and covered more exhibit space than any previous FABTECH. Filling 461,627 sq. ft. of booth space, the show attracted nearly 31,000 visitors from more than 75 countries, a 27 percent...

Continue Reading

AWS acquires Mexican welding tradeshow

January 15, 2008

The American Welding Society (AWS), Miami, has entered into an agreement with Trade Show Consulting (TSC) to purchase Weldmex, the largest welding tradeshow in Latin America.Under the terms of the agreement, the AWS maintains primary ownership of Weldmex and assumes the rights to organize, promote,...

Continue Reading

General Sheet Metal Works expands Tomah, Wis., plant

December 11, 2007

General Sheet Metal Works, South Bend, Ind., has increased the size of its Tomah, Wis., plant from 22,500 sq. ft. to 45,000 sq. ft. of manufacturing space.The company says the additional capacity allows it to gain production efficiencies for current work and accommodate new business. The project...

Continue Reading

American Weldquip appoints district managers

December 11, 2007

American Weldquip Inc., Sharon Center, Ohio, recently appointed two district sales managers, naming Ray Trudell as manager for Ontario, Canada, and Todd Harris as manager for the Mid-South region.Trudell has more than 25 years of experience in the welding industry, serving most recently as...

Continue Reading

Motoman adds senior general manager for Canada plant

December 11, 2007

Motoman Inc., West Carrollton, Ohio, recently named Trevor Jones as senior general manager of Yaskawa Motoman Canada, Mississauga, Ont.Jones has more than 23 years of experience in the robotics industry. He was a founding member of CRS Robotics, which later was acquired by Thermo CRS Ltd., a Thermo...

Continue Reading

JETCAM, HPm announce partnership

November 6, 2007

JETCAM Intl., Monaco, a producer of CAD/CAM software, and HPm Italy, Cavriglia, Italy, a manufacturer of plasma cutting systems and hydraulic press brakes, announced a partnership to offer HPm plasma sheet cutting machines with JETCAM Expert CAD/CAM and nesting software.The latest version of Expert...

Continue Reading

MTC Software expands Asia-Pacific operation

November 6, 2007

MTC Software Inc., Lockport, N.Y., a developer of software for CNC sheet and plate cutting, has opened a sales and applications support facility in Singapore. Working closely with the company's Australian operation, the new office supports MTC Software products in the Asia-Pacific region.The...

Continue Reading

FABTECH Intl. & AWS Welding Show returns to Chicago

October 9, 2007

The 2007 FABTECH® International & AWS Welding Show, the largest North American showcase of metal forming, fabricating, stamping, tube and pipe, and welding equipment and technology, will return to McCormick Place in Chicago Nov. 11 to Nov. 14.Cosponsored by the American Welding Society (AWS),...

Continue Reading

W.A. Whitney names distributors

September 11, 2007

W.A. Whitney, a division of MegaFab, Rockford, Ill., has appointed Weller Machinery Co. as exclusive distributor for its fabricating machines in Wisconsin and named Capital Machine Technologies as its exclusive distributor in Georgia, Florida, Alabama, Mississippi, Louisiana, Arkansas, Tennessee,...

Continue Reading