Waterjet Cutting News

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content

Barton appoints Northwest regional sales manager - TheFabricator

Barton appoints Northwest regional sales manager

June 21, 2010

Barton Mines Co., Glens Falls, N.Y., a supplier of garnet abrasives for waterjet cutting and blast media, has announced the appointment of Rick Miller as regional sales manager for the Northwest region. Miller will serve customers in Washington, Oregon, Montana, Idaho, Wyoming, Utah, and western...

Continue Reading

Mitsubishi names AFM as distributor in Canada

June 7, 2010

MC Machinery Systems Canada Inc., Richmond Hill, Ont., has appointed its newest distributor, AFM (Advanced Fabricating Machinery), Mississauga, Ont. AFM represents Mitsubishi’s laser, waterjet, and press brakes in Ontario, Quebec, and eastern Canada. AFM is headed by Bob Watson, president....

Continue Reading


North South Machinery hires VP of fabrication - TheFabricator

North South Machinery hires VP of fabrication

June 1, 2010

MC Machinery System's West Coast dealer, North South Machinery of Brea, Calif., has hired Bob Stewart as vice president of fabrication. He has nearly 30 years of experience in the fabrication industry. 2010 marks 25 years of partnership for Mitsubishi, located in Wood Dale, Ill., and North...

Continue Reading

Bystronic names service manager for Canada

May 17, 2010

Bystronic Canada Ltd., Mississauga, Ont., has named Michael Cummings as service manager for Canada. He has more than 14 years of technical services, R&D, and management experience. Bystronic Inc. is a provider of laser cutting, waterjet cutting, and press brake systems, system software, and...

Continue Reading

Miro Tool adds waterjet technology

April 12, 2010

Miro Tool & Mfg. has added a Mitsubishi 510 Suprema waterjet machine with a 90,000-PSI KMT pump to its facility in Waukesha, Wis. The 40,000-sq.-ft. plant houses equipment for engineering, prototyping, tooling, stamping, fabrication, welding, assembly, and machining. The DX waterjet series is...

Continue Reading

MultiCam adds technical support staff for Calypso customers

March 23, 2010

MultiCam Inc., Dallas, has added Herbert Roland to its technical support team. Roland was employed at Calypso Waterjet Systems from 2002 until the company closed its doors in 2009. He has extensive machine assembly, field installation, training, applications, and customer support experience. In...

Continue Reading

TECHNI Waterjet names Hegman Machine Tool as distributor

March 5, 2010

TECHNI Waterjet™, Lenexa, Kan., has announced that Hegman Machine Tool Inc. is distributing its 2- and 3-D waterjet cutting machinery in North and South Dakota, Nebraska, Minnesota, and western Iowa. Located in Maple Grove, Minn., Hegman also provides service and support from factory-trained...

Continue Reading

Jet Edge hosts AMT, NTMA executives

February 9, 2010

Jet Edge Inc., a manufacturer of ultrahigh-pressure waterjet systems, recently hosted Douglas K. Woods, president of the Association For Manufacturing Technology (AMT), and Robert L. Akers Jr., chief operating officer of the National Tooling and Machining Association (NTMA), at its St. Michael,...

Continue Reading

AST Waterjet installs five-axis cutting table

November 10, 2009

AST Waterjet, Irving, Texas, has installed a Romeo five-axis waterjet cutting table. It has a 96- by 144-in. cutting bed with 36 in. of clearance. The cutting head tilts to 90 degrees off vertical and rotates a full 360 degrees, making it suitable for cutting simple bevels or complex shapes into...

Continue Reading

Jet Edge acquires Calypso Waterjet Systems

October 13, 2009

Waterjet manufacturer Jet Edge Inc., St. Michael, Minn., has acquired Calypso Waterjet Systems of Dallas, Texas.Founded in 1992, Calypso Waterjet Systems was a manufacturer of waterjet cutting systems before its departure from the water jet industry in early 2009. Its products include waterjet...

Continue Reading

Icon Machine Tool and TECHNI Waterjet host open house

September 9, 2009

TECHNI Waterjet™ and Icon Machine Tool Inc. hosted a Waterjet Open House for its customers and the general public on Aug. 5, 2009. The open house had a full day of waterjet demos, technical discussions, and tours of the TECHNI training facility located in Lenexa, Kansas.The open house...

Continue Reading

WARDJet partners with University of Sheffield AMRC

August 11, 2009

WARDJet, Tallmadge, Ohio, a manufacturer of ultrahigh-pressure waterjet and abrasivejet systems for precision cutting, recently became partners with the University of Sheffield Advanced Manufacturing Research Centre (AMRC) with Boeing. The AMRC is a partnership between the aerospace company and the...

Continue Reading

Bystronic Group, BLM Group form marketing alliance

June 30, 2009

Bystronic (sheet metal processing systems) and the BLM GROUP (tube processing systems) have formed an alliance to work closely together in market development.The alliance between the two groups is effective July 1, 2009. It includes numerous marketing activities to inform (potential) customers...

Continue Reading

OMAX announces settlement in patent litigation

May 18, 2009

OMAX has announced the settlement of the outstanding patent litigation with Flow Corporation, along with the cessation of merger negotiations with the company."Due to the risks and difficulties of obtaining financing inherent in today's capital markets, Flow elected to abandon the proposed merger...

Continue Reading

Flow announces cancellation of OMAX acquisition

May 12, 2009

Flow International Corp., a developer and manufacturer of industrial waterjet machines for cutting and cleaning applications, has announced that it is not exercising its option to acquire OMAX Corp.Charley Brown, President and CEO of Flow said, "After a thorough review of our financing...

Continue Reading