Materials Handling Products

The material handling technology area encompasses systems and equipment for handling coil, sheet, plate, profiles, tube and pipe, raw materials, and scrap. It also covers peripheral accessories such as C-hooks, clamps, die storage systems, hoists, lifters, and sheet stackers and destackers.

Filter Content

Press-to-press transfer system designed for enhanced productivity

March 13, 2007

Rexcon Controls and Automation, a division of Electrex Co. Inc., has introduced Production Pro Line Supervisor and Vision De-Stacker, which comprise a press-to-press transfer system designed to reduce...

Continue Reading

Stock reel drive works with all pan reels, materials

March 13, 2007

Acme Model Engineering Co.'s stock reel drive fits on all size pan reels and payouts all materials smoothly, the company says.The unit attaches to horizontal pan reel turntables. A microswitch starts...

Continue Reading

Sensor monitors up to 2.5 mm blanks for double sheet

February 13, 2007

Roland Industrial Electronics' P30GS single probe sensor can monitor blanks up to 2.5 mm (0.100 in.) for double sheet.The 30-mm-dia. sensor fits into the 3.5-in.-dia. suction cup of the flexible...

Continue Reading

Material handling system replaces or assists forklifts, cranes, and conveyors

January 9, 2007

The nearly frictionless, horizontal omnidirectional Aero-Pallet from AeroGo effectively replaces or assists forklifts, cranes, and conveyors and are suitable for moving heavy bulky loads in...

Continue Reading

Clamps provide enhanced ergonomics, holding power

January 9, 2007

DE-STA-CO's Horizontal Handle Hold-Down Action Clamps (models 2013, 2017, 2027, and 2037) deliver 60 percent more holding capacity than the legacy models in the same envelope, the company says.A knob...

Continue Reading

Hydra-pneumatic cylinder offers high-speed, all power-stoke operation

January 9, 2007

AEC/Hypercyl's HZ series hydra-pneumatic cylinders offers a power-stroke operation for various assembly clamping, piercing, metalworking, pressing, marking, resistance welding, and riveting...

Continue Reading

Magnet/vacuum lifter holds all shapes, steel types

December 12, 2006

The Transporter® MV end-of-arm tooling from Industrial Magnetics Inc. combines vacuum and magnet technology to lift and hold all shapes and types of steel in stamping, blanking, and press-to-press...

Continue Reading

Belt-free magnetic conveyors offered

November 7, 2006

Belt-free magnetic conveyors from Puritan Magnetics convey stamping scrap, knockouts, and chips and turnings from lathes, mills, presses, and other metalworking machinery.The belt design helps to...

Continue Reading

Device rotates fully loaded pallets

November 7, 2006

The PalletPal rotator from Southworth rotates fully loaded pallets. It is suitable for replacing broken pallets, switching to or from in-house shipping pallets, transferring loads to slip sheets, and...

Continue Reading

Vertical-handle clamps save space

November 7, 2006

Vertical-handle hold-down action clamps from De-Sta-Co allow users to save space without compromising holding capacity.Available in 2002, 2007, and 2010 series, the clamps have an ergonomic handle...

Continue Reading

Space-saving forklifts introduced

September 12, 2006

Combilift has developed thee models of its space-saving forklifts for materials handling applications.The TeleCombi is fitted with a one-stage boom mounted on a moving carriage. It has a reach of 3 m...

Continue Reading

Flexible conveyor system allows product transfer between different elevation patterns

September 12, 2006

Conveyor Technologies' Multi-Flex VSC conveyor system has three angle selections—30 degrees, 45 degrees, and 60 degrees—that can be assembled into eight different conveyor types to...

Continue Reading

Compressed-air vacuum lifter lifts up to 550 lbs.

September 12, 2006

The VM-Series vacuum lifter from Anver Corp. is a hoist-integrated, ergonomic lifting system that operates on compressed air for handling loads weighing up to 550 lbs.The fully adjustable frames and...

Continue Reading

Feed system achieves nested pattern in small footprint

August 8, 2006

The WigWag™ feed from Dynamic Feeds Inc. achieves a zigzag (nested) pattern in a small footprint by pivoting motion.The system is controlled by a single software package and uses CAN bus...

Continue Reading

Heavy-duty turntables available in cast iron, stainless steel

July 11, 2006

SKF® Linear Motion & Precision Technologies has introduced its heavy-duty turntables operation in work and assembly stations, welding tables, swivel product displays, material container stands,...

Continue Reading