Tube and Pipe Fabrication Products

The tube and pipe fabrication technology area covers sawing (band, circular, and friction) and other cutting processes, such as abrasive, flame, laser, oxyfuel, plasma, and waterjet. It also discusses forming processes, including bending and end forming. Finally, it includes a handful of miscellaneous processes, such as trimming, beveling, finning, grooving, threading, and spinning.

Filter Content
Pipeline welding machine designed for transmission pipeline, structural steel, construction, fabrication, and MRO applications - TheFabricator.com

Pipeline welding machine designed for transmission pipeline, structural steel, construction, fabrication, and MRO applications

September 21, 2010

Miller Electric Mfg. Co. has introduced the Big Blue® 350 PipePro diesel engine-driven welding machine and AC generator. The machine is designed for transmission pipeline welding, as well as structural steel, construction, fabrication, and MRO applications. The unit provides 20 to 400 amps...

Continue Reading

Boiler tube expanders allow operators to roll multiple tubes rapidly - TheFabricator.com

Boiler tube expanders allow operators to roll multiple tubes rapidly

September 13, 2010

MILLHOG® air-powered tube expanders and rolling motors for creating steel-to-steel mechanical seals in boilers, heat exchangers, and condensers are available from Esco Tool. The tools feature precise torque control from 25 to 325 ft.-lbs. for tube expansion and wall reduction to create...

Continue Reading

CNC tube benders feature extendability, new communication capabilities - TheFabricator.com

CNC tube benders feature extendability, new communication capabilities

August 30, 2010

Maruka offers the Chiyoda Kogyo EX series CNC tube benders with Windows® XP-based control system. The modularly designed main body has little interference area. The machine features the performance characteristics of the SP series CNC bending machine, along with extendability and new...

Continue Reading

Weld heads suitable for restricted-clearance applications - TheFabricator.com

Weld heads suitable for restricted-clearance applications

August 23, 2010

AMI offers model 21 weld heads for fusion welding. Used with the company's model 207 power supply, the weld heads provide high clamping and alignment performance, the manufacturer states. Automated clamping combined with tube centering and alignment verification help lower setup time and...

Continue Reading

All-electric tube bender performs left-hand, right-hand, variable radius bending in multistack configuration - TheFabricator.com

All-electric tube bender performs left-hand, right-hand, variable radius bending in multistack configuration

August 17, 2010

BLM's Smart is a new all-electric tube bender with 3-D visual graphic programming (VGP3D) software capable of bending tubes up to 1.10 in. in diameter. The bender can perform left-hand, right-hand, and variable-radius bending in a multistack configuration. The machine can be equipped with an...

Continue Reading

End forming/roll forming machine offers new control system, includes maintenance diagnostics - TheFabricator

End forming/roll forming machine offers new control system, includes maintenance diagnostics

August 10, 2010

Manchester Tool & Die Inc. has introduced the model M10-H3-R end forming/roll forming machine, featuring standard MTD components and using the same tooling as the M71-H-3 and 24008 machines. The...

Continue Reading

Semiautomatic mandrel bender has capacity to 3-in. round tube and multiple profiles - TheFabricator

Semiautomatic mandrel bender has capacity to 3-in. round tube and multiple profiles

August 10, 2010

CML USA offers the Ercolina® TM76 mandrel bender. It has a bending capacity to 3-in. round tube and multiple profiles, capable of bends to CLR as small as 1.5xD. A USB offers unlimited storage of...

Continue Reading

Pipe and tube cutoff machine autofeeder introduced

August 10, 2010

Continental Pipe and Tube Cut-Off Machines has introduced the PDS series programmable autofeeder. The system provides consistent cuts and is simple to set up and program, according to the...

Continue Reading

90-degree clamp holds workpieces from the outside, leaving unobstructed space inside for welding

June 14, 2010

Strong Hand Tools® has introduced the 90-degree Corner Magnet™ for holding workpieces from the outside, leaving unobstructed space inside the workpiece for welding. The boomerang-shaped...

Continue Reading

Integrated sawing, machining center designed for tubing, solid bar industries

June 7, 2010

Rattunde Corp. has introduced the ACS + CFMcurve integrated sawing and machining center for the tubing and solid bar industry. The ACS sawing function uses electronics, servomotors, and...

Continue Reading

Serpentine benders eliminate need to rotate material between bends

May 10, 2010

Winton Machine has introduced SB series CNC serpentine tube benders for production use. They perform serpentine bending without the need to rotate the material between bends (R axis plane rotation)....

Continue Reading

Vertical tube bender allows user to store multiple programs of up to 12 bends each

April 15, 2010

Huth offers the model 3002 vertical tube bender. It features a programmable touchscreen control that prompts the operator step by step. Programmable automatic bending allows the user to store multiple...

Continue Reading

Tube cutoff automation can be customized

April 15, 2010

Bardons & Oliver has announced that, as an authorized FANUC Robotics integrator, it can customize its CNC and rotating-head tube and bar cutoff equipment and turning machines with FANUC controls,...

Continue Reading

Automatic feeder for tube cutoff can be retrofitted

April 15, 2010

Continental Pipe and Tube Cut-Off Machines has introduced the PDS series programmable auto feeder. The system provides consistent cuts and is simple to set up and program, according to the...

Continue Reading

Crimping machine features automated quality control reporting options

April 6, 2010

Lillbacka Corp. has introduced the Finn-Power King Crimper 1200. It has a maximum crimping force of 1,200 tons and a crimping range from 7.87 to 25.59 in. The unit is equipped with a new UC...

Continue Reading