Stamping News

Whether you're using a high-speed stamping press to make simple parts at breakneck speeds or doing something really tricky, like deep drawing a material that puts up a lot of resistance, the information in this technology area is sure to help. The articles, case studies, and press releases cover stamping presses, lubricants, and materials.

Filter Content

EWI establishes new forming center

November 26, 2012

EWI has launched the EWI Forming Center in Columbus, Ohio, established to focus on sheet metal forming and forging processes. Under the leadership of Director Ron Brown of EWI, Chairman Taylan Altan of The Ohio State University Center for Precision Forming (OSU-CPF), and Technical Director Hyunok...

Continue Reading

Cascadia Metals to install Herr-Voss Stamco cut-to-length line

November 17, 2012

Cascadia Metals Ltd., Delta, B.C., has purchased a cut-to-length line from Herr-Voss Stamco, to be installed at Cascadia's Brandon, Manitoba, facility. The line will include a Herr-Voss Stamco Precision Leveler®, which will process material from 0.024 to 0.135 in. thick. It also will include a...

Continue Reading

High Steel installs new stretcher leveler line

November 5, 2012

High Steel, Lancaster, Pa., has installed a 72- by 0.500- in. by 60,000-lb. SUREGRIP® stretcher leveling line from Red Bud Industries. The new line consists of an inline stage and load system, dual stub uncoiler, heavy-gauge peeler/breaker, crop shear, dual roller levelers, adjustable stretcher...

Continue Reading

NCCA names technical director

October 30, 2012

The National Coil Coating Association (NCCA), Cleveland, has named Al Dunlop to the position of technical director. He works to advance the association's strategic objectives by enhancing the group's technical competence. As part of his position, Dunlop will connect with other associations and...

Continue Reading

Herr-Voss to deliver cut-to-length line to Ken Mac Metals Div.

October 30, 2012

Herr-Voss Stamco, Callery, Pa., is providing a new cut-to-length line for Ken Mac Metals Div. of ThyssenKrupp Materials North America Inc. The line will process ferrous and nonferrous material from 0.075 to 0.312 in. thick by 72 in. wide in coils up to 60,000 lbs. The line features a Precision...

Continue Reading

Feed Lease partners with Cydak do Brasil

October 30, 2012

Feed Lease Corp., Rochester Hills, Mich., has announced its recent business partnership with Cydak do Brasil, a shop in Brazil with more than 20 years of experience in metal stamping, refurbishment, and retrofitting. This partnership will promote Cydak as the primary supplier of Feed Lease...

Continue Reading

Coe Press Equipment appoints quality manager

October 25, 2012

Coe Press Equipment, Sterling Heights, Mich., a provider of coil handling equipment, has announced the appointment of Benjamin Goers as quality manager, a newly created position. He is responsible for the company's quality management system and implementation of ISO 9001. Goers served previously...

Continue Reading

Dayton Progress, Anchor Lamina to be acquired by MISUMI Group

October 23, 2012

Misumi Group Inc. of Japan has signed a definitive agreement to acquire Dayton Progress Corp. and its subsidiary, PCS Co., from Connell Ltd. Partnership, pending certain regulatory approvals. The acquisition, expected to close in November, also will include the Anchor Lamina Die Components business...

Continue Reading

Arku holds Oktoberfest celebration -

Arku holds Oktoberfest celebration

October 10, 2012

Every two years Arku invites customers, business partners, and friends for a customer appreciation day including an Oktoberfest with authentic German food, beverages, and folk music. More than 100 guests attended the event on Oct. 4, 2012, at the company's Cincinnati location. Albert Reiss,...

Continue Reading

American Punch earns ISO 9001:2008 recertification

October 9, 2012

American Punch Co., Cleveland, has announced its recertification to ISO 9001:2008. The company manufactures punches, dies, and shear blades for the structural steel and metal fabricating industries. It also supplies precision die components to the stamping, roll forming, and metal forming...

Continue Reading

Royalton Industries updates website

October 8, 2012

Royalton Industries, Columbia Station, Ohio, has redesigned its website at The site now is easier to navigate, contains more selections, allows requests for quotes, and includes videos, the company reports. Featured on the site are tube and pipe mill entry equipment,...

Continue Reading

Trico Corp. to develop new oil analysis laboratory in Wisconsin -

Trico Corp. to develop new oil analysis laboratory in Wisconsin

October 1, 2012

Trico Corp., a provider of lubrication management services and products, is adding a new oil analysis laboratory at its Pewaukee, Wis., facility. The lab's demand-driven instrument configurations will allow for immediate changes to instrument locations as customer requirements change. Set for...

Continue Reading

Wilson Tool acquires Toolspress

September 24, 2012

Wilson Tool Intl., Swindon, U.K., manufacturer of tooling systems for punch presses, press brakes, and punch and die components for the stamping industry, has expanded its global manufacturing capabilities with the acquisition of Italian press brake tooling manufacturer Toolspress, Parma, Italy....

Continue Reading

Arku names field service manager -

Arku names field service manager

September 20, 2012

Arku, Cincinnati, has hired Aaron Walker as its new field service manager for customers in the U.S. and Canada. He has a bachelor's degree in electrical and computer engineering and a lot of experience in installing new equipment and servicing older machines. As service technician, he does...

Continue Reading

Ferrous 85" Co. starts up North America's largest slitter

August 30, 2012

Ferrous Metal Processing has installed a 0.625- by 87-in. slitting line at TMK IPSCO's new facility in Wilder, Ky., operating as Ferrous 85" Co. According to the manufacturer, it is the largest slitter in North America. The slitter can process master coils from 30 to 87 in. and up to 82,000 lbs....

Continue Reading