Products

Filter Content

Laser hybrid welding process includes inductive preheating

September 15, 2014

Laser Zentrum Hannover e.V. and the Leibniz Universität Hannover have developed a hybrid welding system with inductive preheating. This process can be used for single-layer welding of high-strength, fine-grain structural steels up to a thickness of 0.79 in. Before the welding process takes...

Continue Reading

Surface-mount dock lift requires no pit

September 15, 2014

Southworth Products Corp. offers SMDDL surface-mount scissor dock lifts that require no pit, making them suitable for leased or temporary buildings. With a lowered height of 5 in. and a raised height of 58 in., the lifts can access loads on truck beds of any height and transfer them to a...

Continue Reading

Manual plasma cutting/gouging system removes up to 25 lbs. of carbon steel per hour

September 15, 2014

Victor® Thermal Dynamics® has launched an improved PAK 200i manual plasma cutting and gouging system. It delivers 100 percent duty cycle at 200 amps, is capable of hand cutting up to 2.75 in. on mild steel and 10 IPM on 2-in. carbon steel, and removes up to 25 lbs. of carbon steel per hour....

Continue Reading

Noncontact, nondestructive modular inspection systems monitor processes in real time

September 12, 2014

Noncontact and nondestructive modular inspection systems are available from plasmo LLC USA for quality assurance applications, with a focus on welding fabrication. The processobserver advanced is designed for process monitoring during welding, cutting, and laser drilling. It inspects and...

Continue Reading

Inverter-based power source designed for high-productivity welding

September 12, 2014

ESAB Welding & Cutting Products will display the Aristo® Mig 4004i Pulse power source at FABTECH. It can be combined with the Aristo Feed 3004 or Aristo Feed 4804 wire feeder to form a complete GMAW package. The feeds are offered with a choice of machine interface — the user-friendly U6 or...

Continue Reading

Reversible liquid vacuums removal tramp oils, waste coolants

September 12, 2014

Eriez® HydroFlow® reversible liquid vacuums remove spent coolants, waste fluids, and oils from machine sumps, reservoirs, and storage tanks. These units discharge fluids out of the drum into a separate container, if desired, with the turn of a knob. The units fit into the palm of the user’s...

Continue Reading

3-D laser metal printing device introduced

September 11, 2014

Fonon has unveiled the new 3D FUSION™ system for 3-D laser metal printing. This additive manufacturing technology can be used in the medical, manufacturing, defense, aerospace, and high-technology engineering and electronics sectors. The digitally driven additive manufacturing process fuses...

Continue Reading

Cut-resistant tube sleeve provides arm protection

September 11, 2014

Wells Lamont Industrial has introduced the KRG cut-resistant tube sleeve. It provides ANSI Level 4 cut resistance, as well as flame-resistant properties. The reusable sleeve is made from Kevlar® and other high-performance materials to withstand multiple launderings and provide comfort and...

Continue Reading

Heavy-duty studs with large-diameter heads clinch permanently into thin metal sheets

September 11, 2014

New PEM® Type THFE™ heavy-duty studs from PennEngineering® clinch permanently into thin metal sheets to provide high-strength attachment. The enlarged head diameter distributes axial tightening force over a wide area to help reduce compressive stress on the host panel, improve pull-through...

Continue Reading

Hand-held unit provides complete resistance welding process control

September 11, 2014

Dengensha America’s new hand-held Weldscope WS-100 controls 15 monitoring functions and three selectable detection ranges. Users can monitor, measure, save, and print out welding current, cycle time, and peak current from numerous types of welding machines, including AC and DC, single- and...

Continue Reading

Degreasing solvent is nonflammable

September 10, 2014

Necotek Solutions has developed Necosolv-TB solvent for use as a paint thinner and for degreasing and cleaning surfaces. The low-toxicity, nonflammable solvent is not a hazardous air pollutant. Its kauri-butanol value is 106, with a boiling point of...

Continue Reading

X-ray fluorescence device measures PVD coating thickness

September 10, 2014

Fischer Technology Inc. offers the FISCHERSCOPE® X-RAY XDLM®237, an X-ray fluorescence device for NDT of PVD coating on saws, drills, and dies. The unit combines the high-intensity beam of a microfocus tube with a small aperture and large detector window. It features a 50-μm measurement spot...

Continue Reading

Universal compact cams covers light- to heavy-duty applications

September 10, 2014

DaytonLamina will unveil its LamCam™ line of universal compact cams at FABTECH. The company offers 13 series of aerial and die mount universal cams for applications from low volume/light duty to high volume/heavy duty. Cam widths are available from 1.97 to 23.62 in., each with a common footprint...

Continue Reading

Wet collector captures combustible dust

September 10, 2014

Micro Air HydroMax™ dust collectors are designed to address the problem of dust explosions in manufacturing plants and recent related OSHA and NFPA regulations. The wet collectors feature engineered water streams to drop out and filter the combustible dust, containing it in the bottom of the...

Continue Reading

80-W laser added to metal tag printer

September 9, 2014

InfoSight Corp. has announced the availability of a laser upgrade on its 2800 series metal tag printers. The 2886 laser printer now is available with an 80-W laser. The laser is designed to speed up the tag’s print time for users whose processes have changed and who require faster...

Continue Reading