Stamping Products

Whether you're using a high-speed stamping press to make simple parts at breakneck speeds or doing something really tricky, like deep drawing a material that puts up a lot of resistance, the information in this technology area is sure to help. The articles, case studies, and press releases cover stamping presses, lubricants, and materials.

Filter Content

Swage hydraulic press can stand close proximity to bed

December 12, 2006

Beckwood Press Co. offers the bulldozer swage hydraulic press with the ability to stand in close proximity to the bed. The machine is horizontal-acting and designed for any size, stroke, or...

Continue Reading

Press designed for aerospace industry

December 12, 2006

Avure Technologies Inc. now offers a new model of its Flexform press. The QFC 1x2-800 is an intermediate-sized sheet metal forming press for forming complex shapes and single-shot production to close...

Continue Reading

Leveling mounts support presses up to 2 million lbs.

November 7, 2006

AirLoc® offers Wedgmount® leveling mounts and engineered elastomer pads.Standard mounts support presses ranging in size from small gap-frame presses to blanking/transfer presses weighing 2...

Continue Reading

Press brake tooling designed for TRUMPF, LVD-style machines

October 10, 2006

Wilson Tool International® has launched its WT press brake tooling for TRUMPF-style and LVD-style press brakes.The line offers 10 standard punch profiles from 120 to 220 mm and 17 different dies...

Continue Reading

Press designed for drawing, embossing, pressing, hydroforming

October 10, 2006

The ODEN multipurpose press from AP&T North America Inc. is a new modular system that the company says provides short lead-times and high flexibility.The press is available from 112- to 354-ton...

Continue Reading

Servo roll feed suitable for staggered feeding narrow-width coil

September 12, 2006

Coe Press Equipment has developed a new series of zigzag servo roll feeds for staggered feeding applications of narrow-width coil.The roll feeds process coil widths from 12 to 30 in. and thicknesses...

Continue Reading

In-die welding system welds nuts, screws at up to 60 SPM

September 12, 2006

OCON Automated Systems' in-die welding system is suitable for the integrated welding of nuts and screws while stamping with progressive, transfer, and tandem dies.The system welds nuts and screws at...

Continue Reading

Pierce units are self-equalizing

August 8, 2006

Aries Eng. Co. Inc. offers the HyperPierce® self-equalizing press unit for high-production piercing and assembly. It incorporates HyperCyl® hydrapneumatic drive units.The press unit operates...

Continue Reading

Feed system achieves nested pattern in small footprint

August 8, 2006

The WigWag™ feed from Dynamic Feeds Inc. achieves a zigzag (nested) pattern in a small footprint by pivoting motion.The system is controlled by a single software package and uses CAN bus...

Continue Reading

Straight-side press available in up to 660-ton capacity

August 8, 2006

Stamtec Mechanical Presses has introduced the S2-ProgMax straight-side presses in 330-, 440-, and 660-ton capacities.The press features a variable-frequency drive, wide-spaced pitmans, and low overall...

Continue Reading

Hydraulic, mechanical presses designed for automotive parts

August 8, 2006

ISGEC manufactures mechanical and hydraulic presses for automotive parts.The presses' dedicated man-machine interface software are customized systems to enable interfaces in various European...

Continue Reading

Dual-slide transfer press has 800-ton closing force

July 11, 2006

Schuler Hydrap has developed a hydraulic dual-slide transfer press with a closing force of 800 tons used to manufacture dishwasher inner doors and rear walls.The system has two individually...

Continue Reading

Large-bed custom hydraulic compression molding press delivered

July 11, 2006

Greenerd Press and Machine Co. Inc. recently delivered a large-bed hydraulic compression molding press to a manufacturer of automotive components in the Southeast.Greenerd custom-designed and built...

Continue Reading

Press brake combines hydraulic, AC servo characteristics

June 13, 2006

The Toyokoki HYB press brake from MC Machinery Systems Inc. combines the characteristics of hydraulic brakes with AC servo brakes.Although the press brake uses hydraulic pressure to move the ram, the...

Continue Reading

Ironworker has built-in bending station

May 9, 2006

The 50-ton, five-station Geka Bendicrop ironworker from Comeq Inc. features a full structural die block and quick-change tooling. It has a built-in bending station.Bending length is 4 in. with a...

Continue Reading