Tube and Pipe Production

The tube and pipe production technology area encompasses mills and all of the equipment that makes a mill run successfully: tooling, welding units, nondestructive testers, bundlers, scarfing equipment, straighteners, scrap choppers, and washing systems.

Filter Content

Mayville Engineering to purchase assets of Fabricating Specialists

September 16, 2008

Mayville Eng. Co. (MEC), a contract manufacturer in Mayville, Wis., has acquired the assets of Fabricating Specialists LLC, a manufacturer of formed tubular components and assemblies for the...

Continue Reading

HFI Tube and pipe mills

Increasing efficiency of HFI tube and pipe mills

September 16, 2008

By:

Manufacturing welded tube and pipe efficiently requires controlling several variables. The material type, gauge, edge condition, tooling setup, and weld heat are just a few of the factors that quality control managers, mill supervisors, and operators must pay attention to in their efforts to...

Continue Reading

Bosch Rexroth opens new facility

July 15, 2008

Bosch Rexroth Corp., Hoffman Estates, Ill., recently opened a new facility, Tech Center East, in Rochester Hills, Mich.Tech Center East is involved in developing hydraulic hybrid systems that are...

Continue Reading

Roll-Kraft receives safety award

July 15, 2008

Roll-Kraft's safety record recently was reviewed by the Lake County Safety Council in Ohio. As a result, the Mentor, Ohio, company received an award for having no lost-time injuries during the rating...

Continue Reading

Al Fajer Information, Messe Dsseldorf announce dates for Tekno/Tube Arabia 2009

June 17, 2008

Tekno/Tube Arabia: 9th International Trade Fair for Industrial Machinery, Metalworking, Machine Tools, Dies/Molds, Tubes, and Pipes is scheduled to run Jan. 11-14, 2009, at the Dubai International...

Continue Reading

Plymouth Tube names general manager

May 15, 2008

Plymouth Tube Co., Warrenville, Ill., has appointed Gavin Ford as general manager of its hot mill in Winamac, Ind.Ford previously worked for Prestolite Wire Corp.; while there he held the positions of...

Continue Reading

Tube verification system introduced

May 13, 2008

Two companies have worked together to introduce a new method for documenting or verifying large and complex tubes, such as those found in the oil and chemical industries, but also in aircraft and...

Continue Reading

Scale

Buy it by the pound, sell it by the foot

April 15, 2008

By:

If you're a tube or pipe producer, you're probably under constant pressure to cut costs. And you probably know that you can reduce your raw material costs by reducing the coil width, within reason, and the change will have little noticeable impact on the final product's quality. However, this doesn't give you license to make wholesale significant width reductions. In fact, you'd probably be better off developing a comprehensive process optimization program and striving for higher efficiency instead of merely cutting costs.

Continue Reading

Warren Steel Holdings completes vacuum tank degasser

February 12, 2008

Warren Steel Holdings, Warren, Ohio, announced that it completed the hot commissioning of its vacuum tank degasser and related systems.The system is fully operational, and the company has begun...

Continue Reading

Messe Dsseldorf, ZAO Expocentr plan Tube Russia 2008

January 15, 2008

Tube Russia 2008, an international tube and pipe trade fair, is scheduled to run May 27–30 at the ZAO Exhibition Center in Moscow. The event will be organized jointly by Messe Dsseldorf and ZAO...

Continue Reading

FABTECH hosts 31,000 visitors, covers 461,627 sq. ft.

January 15, 2008

The 2007 FABTECH® International & AWS Welding Show at McCormick Place in Chicago hosted more exhibiting companies and covered more exhibit space than any previous FABTECH. Filling 461,627 sq. ft....

Continue Reading

Roll Forming Diagram

Using FEM to compare tube forming processes

January 15, 2008

By:

Finite element analysis (FEA) software developed specifically for roll forming can help tube producers determine the best forming process for tube (such as single-radius forming, edge forming, or partial-step forming). It also can help tube producers find forming problem areas and eliminate them.

Continue Reading

Image of coins

Working with stainless on a budget

December 11, 2007

By:

The high cost of stainless steel—especially the spikes caused by nickel surcharges—has caused many tube manufacturers' customers to look for alternative alloys. What can tube producers expect after switching from a 300-series stainless to a less expensive alloy? It depends on the new alloy and the production process.

Continue Reading

Roll-Kraft hosts seminars

November 6, 2007

Roll-Kraft hosted nearly 100 tube and pipe and roll forming manufacturers during its two-day training sessions at the company's headquarters in Mentor, Ohio. The event was conducted by Robert A....

Continue Reading

FABTECH Intl. & AWS Welding Show returns to Chicago

October 9, 2007

The 2007 FABTECH® International & AWS Welding Show, the largest North American showcase of metal forming, fabricating, stamping, tube and pipe, and welding equipment and technology, will return to...

Continue Reading