Waterjet Cutting

Filter Content

OMAX launches mobile websites

June 14, 2012

OMAX® Corp., Kent, Wash., a designer and manufacturer of abrasive waterjet machines and accessories, has launched new mobile websites for its OMAX and MAXIEM® product lines. The content-rich sites, viewable at www.omax.com and www.maxiemwaterjets.com, provide on-the-go customers with quick...

Continue Reading

Jet Edge to host exporting seminar July 11

June 13, 2012

Waterjet systems manufacturer Jet Edge Inc. will co-sponsor a free exporting seminar, Exporting 101, on Wed., July 11, from noon-4:30 p.m. at St. Michael City Center in St. Michael, Minn. Hosted by the city of St. Michael Economic Development Authority, the seminar will show attendees how...

Continue Reading

Abrasive waterjet cutting machines featured at tradeshow - TheFabricator.com

Abrasive waterjet cutting machines featured at tradeshow

June 12, 2012

OMAX™ Corp. will present live demonstrations of its abrasive waterjet cutting machines and accessories at IMTS 2012. Operating at the show will be a 6.7- by 20-ft., production-oriented OMAX 80X-1 Dual Bridge JetMachining Center™; a job shop-sized, 5- by 10-ft. MAXIEM® model...

Continue Reading

TECHNI Waterjet appoints general manager - TheFabricator.com

TECHNI Waterjet appoints general manager

June 8, 2012

TECHNI Waterjet™ has promoted Dennis Schmidt to general manager USA operations. Schmidt has been with the company for five years, previously serving roles in product development and as international service manager. As general manager, he is responsible for the U.S. operations and staff....

Continue Reading

Waterjet pump uses less electricity - TheFabricator.com

Waterjet pump uses less electricity

May 30, 2012

Jet Edge Inc. has introduced the Eco-Jet waterjet pump. The 55-KSI, 30-HP unit features a direct-drive pump design that consumes up to 40 percent less electricity than a 50-HP pump while producing the same output, the manufacturer reports. The pump produces up to 1 GPM of ultrahigh-pressure...

Continue Reading

Waterjet cutting system features small footprint - TheFabricator.com

Waterjet cutting system features small footprint

May 29, 2012

TECHNI Waterjet™ has introduced the new Intec-G2 Value series of small-footprint waterjet cutting systems. The system, which features a large monitor screen, is available with an optional remote control pendant. The Skip and Float™ option helps ensure a constant standoff height over...

Continue Reading

OMAX appoints vice president of product engineering - TheFabricator.com

OMAX appoints vice president of product engineering

May 16, 2012

Abrasive waterjet system manufacturer OMAX® Corp., Kent, Wash., has hired Doug Kelley as its new vice president of product engineering. Kelley has spent more than 30 years as an engineer for a variety of global high-tech industries, including Cray Inc., UTILX Corp., and FlowDril. He has...

Continue Reading

Water-based coolant prevents odors, rust

May 15, 2012

Pico Chemical Corp. has introduced Pico Quench Guard G for use in plasma, waterjet, and other cutting table systems. The water-based solution is designed to cool and quench cutting surfaces and protect ferrous and nonferrous machinery components and processed parts from rust and corrosion for...

Continue Reading

Flow supplies waterjet system to Parker Brothers Concepts

May 8, 2012

Flow Intl. Corp., Kent, Wash., has announced that Parker Brothers Concepts, featured on Syfy's reality series "Dream Machines," has added a Flow Mach 3 abrasive waterjet machine tool. The 4- by 2-m system includes the manufacturer’s patented Dynamic Waterjet® cutting technology and a HyperJet®...

Continue Reading

Retro Systems opens technical training center, adds staff

April 12, 2012

Retro Systems has opened a technical training center adjoining its Valley Center, Kan., manufacturing facility. The 7,000-sq.-ft. training center includes offices, a student classroom, and a 4,500-sq.-ft. lab equipped with CNC cutting equipment for demonstrations. Classes are offered for end users...

Continue Reading

Bystronic to open new headquarters in Illinois - TheFabricator.com

Bystronic to open new headquarters in Illinois

April 12, 2012

Bystronic Inc. will host the grand opening of its new North American headquarters May 3-4, 2012. The 48,300-sq.-ft. building, located in Elgin, Ill., has a 10,000-sq.-ft. office, 14,000-sq.-ft. showroom, and 24,300-sq.-ft. spare parts and logistics area. In addition to being the company's...

Continue Reading

Entry-level waterjet designed for production environments

April 10, 2012

Mitsubishi's MW3 entry-level waterjet machine for production environments features solid base construction and a cantilever head design. The 720 CNC delivers advanced programming capabilities. The unit is controlled on a 15-in. waterproof screen. Menu and help functions guide the operator through...

Continue Reading

Axes to mine - TheFabricator.com

Axes to mine

April 3, 2012 | By Dan Davis

More fabricators haved jumped into flat waterjet cutting, so to attract new customers and carve out a niche around 3-D design and manufacturing, Maximum Industries, Irving, Texas, started five-axis cutting in 2011.

Continue Reading

Hypertherm retires MTC brand name

March 29, 2012

Hypertherm, a manufacturer of advanced cutting systems in Hanover, N.H., has begun marketing its ProNest, TurboNest, NestMaster, and Design2Fab software under the Hypertherm name. The products, formerly marketed under the MTC brand name, support a number of different cutting processes including...

Continue Reading

John Force Racing adds waterjet to manufacturing facility

March 28, 2012

John Force Racing Inc. has installed a Mach 4 waterjet from Flow Intl., Kent, Wash. The machine features a HyperJet® pump rated at 94,000 PSI and Dynamic Waterjet® XD for bevel cutting and 3-D parts. The waterjet is housed in JFR's 160,000-sq.-ft. Brownsburg, Ind., facility, which currently...

Continue Reading