Finishing Products

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content
Hand-operated grinder deburs laser-cut, punched parts - TheFabricator.com

Hand-operated grinder deburs laser-cut, punched parts

April 18, 2011

AM Machinery Sales Inc. has introduced the SwingGrinder for deburring laser-cut and punched parts. According to the manufacturer, the machine is three to four times faster than manual deburring. The hand-operated device, which features a rotating head, provides a grinding disc on one side and...

Continue Reading

Small-part deburring machine processes both ferrous, nonferrous material

April 12, 2011

The CrossMaster DD double-disk deburring machine, offered by AM Machinery Sales, handles parts as small as the size of a quarter. The through-feed machine was designed specifically for small parts to eliminate hand deburring or vibratory operations. The machine can process both ferrous and...

Continue Reading

Extended nose grinder finishes, polishes hard-to-access fillet welds

March 29, 2011

Metabo Corp. offers the KNSE 12-150 fillet weld grinder for finishing metals, including stainless steel. The extended-nose grinder is used for finishing and polishing hard-to-access fillet welds typically found on handrails and inside welds on enclosed areas. The 6.6-lb. unit has a flat design....

Continue Reading

Cordless surface finisher usable for up to 15 minutes on one charge

March 29, 2011

The Poly PTX Accu 28V cordless longitudinal grinder from CS Unitec can be used for up to 15 min. on one charge. It is suitable for on-site use or assembly work when a power supply isn't available. Surface grinding and positioning are possible with one tool, even on pipes. Weighing 8.1 lbs....

Continue Reading

Metal surface sander provides 4 in. of working tool width - TheFabricator.com

Metal surface sander provides 4 in. of working tool width

March 14, 2011

CGW-Camel Grinding Wheels has introduced a metal surface drum sander and flap wheel drum line for large-scale metal finishing. The flap drum sander features electronic controls, a soft-start feature, and a variable-speed dial. It has an overload protection feature and high-speed capacity. The...

Continue Reading

Abrasive belt machines' thermal insulation helps prevent cold air transmission to operator - TheFabricator.com

Abrasive belt machines' thermal insulation helps prevent cold air transmission to operator

February 17, 2011

Dynabrade Inc. offers Dynastraight&reg: portable, air-powered abrasive tools for paint and rust removal, refining before final finishing, medium- and fine-grain finishing, and final finishing. The ergonomically designed, lightweight composite housing helps reduce tool vibration, while...

Continue Reading

Burnisher accommodates wheel diameters from 4 to 4.5 in., widths from 0.625 to 4 in.

February 17, 2011

Metabo Corp. offers the SE12-115 burnisher for finishing and polishing stainless steel and other metals. With accessories such as an expansion roll, sanding and abrasive belts, flap wheels, a stripping wheel, burnishing rings, wire wheels, a fiber brush, and a belt driver, the burnisher can be...

Continue Reading

Weld cleaning brushes feature dual-hex nuts to eliminate need for guard removal - TheFabricator.com

Weld cleaning brushes feature dual-hex nuts to eliminate need for guard removal

February 7, 2011

Weiler has introduced the DUALLY™ stringer-bead brush. It features a new dual-hex nut that helps eliminate interference issues that might otherwise force users to remove the guards from their angle grinders. The patent-pending design features a nut with a hex on each side of the wheel...

Continue Reading

Air-powered abrasive-belt machine can be used in normally inaccessible areas - TheFabricator.com

Air-powered abrasive-belt machine can be used in normally inaccessible areas

January 24, 2011

Dynabrade's Mini-Dynafile II is a lightweight, air-powered abrasive-belt machine for grinding, blending, and deburring in normally inaccessible areas. Running at 25,000 RPM, the machine uses 0.125- to 0.5-in.-wide by 12-in.-long abrasive belts. The tool accepts coated and abrasive-impregnated...

Continue Reading

Pass-through wash system processes parts up to 12 in. high - TheFabricator.com

Pass-through wash system processes parts up to 12 in. high

January 10, 2011

Viking Blast & Wash Systems has released the new CBW 1212 pass-through wash system. This heated jet spray washer incorporates a powered, galvanized, 12-in. chain-belt conveyor, with variable speeds from 1 to 10 linear FPM. It can process parts up to 12 in. high. The heavy-duty, 12-ga....

Continue Reading

Deburring tool eliminates burrs, secondary operations on punched parts - TheFabricator.com

Deburring tool eliminates burrs, secondary operations on punched parts

January 10, 2011

Mate's new Rollerball Deburr™ tool eliminates burrs and secondary operations on punched parts. Designed to deburr mild steel, stainless steel, and aluminum sheet material in any thickness, the tool removes the burr automatically as part of the punching process. The tool is designed for...

Continue Reading

Grinder/polisher stores, recalls 32 methods - TheFabricator.com

Grinder/polisher stores, recalls 32 methods

January 10, 2011

Buehler has introduced the EcoMet® 250/300 Pro grinder/polisher with AutoMet® 250/300 power head. It can store and recall 32 methods via touchscreen controls. A Zaxis (Z-axis) function removes material by depth instead of time. Platen and power head speeds adjust in 10-RPM increments....

Continue Reading

Liquid mixing, delivery system introduced

December 6, 2010

IntelliMeld™, a new dual liquid mixing and delivery system for industrial use, has been introduced by Colvin Consulting. It is designed for use with stamping presses, chemical mixing, and finishing applications. The system can store hundreds of recipes, integrate with process equipment, and...

Continue Reading

Depressed-center right-angle grinding wheel line expanded - TheFabricator.com

Depressed-center right-angle grinding wheel line expanded

November 29, 2010

Saint-Gobain Abrasives has expanded its line of Norton depressed-center wheels for right-angle grinding. The Charger™ Plus and Gemini® lines now include INOX contaminant-free wheels, which contain less than 0.01 percent iron, sulfur, or chlorine for rust-free and corrosion-free...

Continue Reading

High-gloss coatings withstand heat to 500 degrees F

November 29, 2010

Dampney Co. Inc.'s Thurmalox® 8800 series heat-resistant, high-gloss coatings provide a decorative, porcelain-like finish on metal surfaces that withstands heat to 500 degrees F. Developed for single-coat application in OEM production lines, the silicone-based, VOC-compliant baking enamel is...

Continue Reading