Tube and Pipe Fabrication Products

The tube and pipe fabrication technology area covers sawing (band, circular, and friction) and other cutting processes, such as abrasive, flame, laser, oxyfuel, plasma, and waterjet. It also discusses forming processes, including bending and end forming. Finally, it includes a handful of miscellaneous processes, such as trimming, beveling, finning, grooving, threading, and spinning.

Filter Content

Tube cutoff machines provide quick, easy setup

June 9, 2009

Continental Pipe & Tube Cutoff machines provide fast and easy set-up, adjustment, and can handle a variety of pipe and tube diameters and lengths efficiently. Because the rotary cutoff wheel passes...

Continue Reading

Automatic band saw for job shops released

June 9, 2009

Hyd-Mech Group Ltd. has released the SM10CNC single-miter automatic band saw for job shops. It features a 10-in. round or 7 - by 11-in. capacity at 90 degrees; a 1-in. blade; a 2.5-HP direct-drive...

Continue Reading

Semiautomatic tube bender accepts large-radii tooling to 16-in. CLR

June 9, 2009

Ercolina's GB90/GB100 semiautomatic Giga Bender mandrel machine is suitable for bending tube, pipe, and square and rectangular profiles to CLR as tight as 1.5xD and accepts large-radii tooling to...

Continue Reading

Automatic beveler produces angles up to 60 degrees

June 9, 2009

Bug-O Systems/Cypress Welding Equipment has introduced the SPB-3000 Pitbull portable automatic beveler. According to the manufacturer, the unit produces clean, machined bevels without operator...

Continue Reading

330-amp welding torch handles extreme applications

June 9, 2009

Abicor Binzel has introduced the new Abi-Flux welding torch. Rated at 330 amps, the torch is suitable for extreme applications in pipeline construction, cladding, and rail-joint welding, as well as...

Continue Reading

Gantry, rail system supports ultrasonic tester for oil, gas pipe testing market

May 12, 2009

Haven Mfg. Corp. has designed a gantry and rail system that supports a full-body phased-array ultrasonic tester for the oil and gas pipe testing market.The system's capacity is 2.52 to 21.06 in. in...

Continue Reading

Shaft collars, couplings designed for drive train applications in wind power systems

May 12, 2009

Large-bore shaft collars and rigid couplings for drive train applications in wind power generation systems are available from Stafford Mfg. Corp.The collars and couplings are engineered for...

Continue Reading

Welding end prep tool bevels, faces in one operation

May 12, 2009

A heavy-duty, ID-clamping pipe milling end prep tool that can bevel and face in one operation, including any degree of end prep and compound bevels, is available from Esco Tool.The Prepzilla®...

Continue Reading

Band saw blade lines expanded

April 14, 2009

The L.S. Starrett Co. offers several new band saw blade lines.Developed for cutting structural steels, sections, tubes, and small solids, the Versatix™ MP bimetal blade has a patent-pending...

Continue Reading

End prep tool holds up to three blades at once

March 10, 2009

The MILLHOG® line of end prep tools from ESCO Tool comes with the EscoLock™ blade lock system, which holds up to three blades at once to allow simultaneous beveling, facing, and boring...

Continue Reading

Automated orbital welding system introduced

March 10, 2009

Gullco Intl. has introduced its Pipe KAT® welding system, which automates a variety of orbital welding applications. The system uses a variable-speed welding travel carriage with a maximum speed...

Continue Reading

Bimetal band saw blades offer increased fatigue resistance, tooth durability

February 10, 2009

Challenger™ bimetal structural band saw blades are available from M.K. Morse. They are constructed using PTP™ technology, a proprietary process which, in combination with specialized tooth...

Continue Reading

Light-duty manual band saw cuts tubes, pipes up to 8 in. at 90 degrees

February 10, 2009

The Kalamazoo Machine Tool model H235 manual band saw is designed for light-duty cutting of tubes, pipes, light structural shapes, and small solids up to 8 in. at 90 degrees. The saw has a...

Continue Reading

Double-pinch ring rollers have heavy-duty structure, reinforced engineered mainframe design

February 10, 2009

CML USA Ercolina® has introduced two new double-pinch ring rollers. The forged roll shafts are precision-ground and -fitted. The rollers feature heavy-duty structure and rigid components, as well...

Continue Reading

Metal cutter produces cool, clean, ready-to-weld cuts

January 20, 2009

SteelMax LLC has introduced a 14-in. metal cutting saw that cuts metal cool and clean without burring, heat distortion, or sparking. The S14 is designed for cutting mild steel, stainless, and...

Continue Reading