Finishing Products

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content
Abrasive flap disks designed to achieve high stock removal and finish consistency in one step - TheFabricator.com

Abrasive flap disks designed to achieve high stock removal and finish consistency in one step

September 13, 2010

Weiler offers the BobCat™ line of abrasive flap disks for deburring, grinding, and blending using a right-angle air die grinder. They achieve high stock removal and excellent finish consistency in one step, the company says. The 2- and 3-in. disks also are suitable for detail work and for...

Continue Reading

Flexible-shaft grinder designed for awkward pieces, hard-to-reach areas - TheFabricator.com

Flexible-shaft grinder designed for awkward pieces, hard-to-reach areas

August 17, 2010

CS Unitec's Flexible Drive Shaft grinder is designed for grinding and polishing work on awkward pieces and in hard-to-reach areas. The flexible shaft converts any industrial angle grinder with a 5/8 by 11 spindle into a lightweight, hand-held grinding/polishing tool. It is suitable for use with...

Continue Reading

Spiral-bottom, round-bowl finishing machine keeps parts in media mass constantly - TheFabricator.com

Spiral-bottom, round-bowl finishing machine keeps parts in media mass constantly

August 17, 2010

Almco Inc. has introduced a new model in its line of spiral-bottom, round-bowl finishing machines. It offers a full-circle baffle that keeps parts in the media mass constantly and a 24-cu.-ft. tub that can accommodate large and small parts. The new SBB design features automatic separation of...

Continue Reading

Angle grinder has enhanced safety features

July 12, 2010

Metabo Corp. has introduced the new 6-in. WB11-150 Quick compact angle grinder. When used in conjunction with grinding disks, the brake stops the tool within 3 seconds; with thin cutting disks, it...

Continue Reading

Electronic grinder has nonlocking paddle switch

June 1, 2010

Metabo Corp. offers an electronic 6-in. angle grinder/cutoff machine with a nonlocking paddle switch. The WEP14-150 Quick "Deadman" turns off automatically when released or dropped. With a 12.2-amp...

Continue Reading

Flap disks conform to curved, irregular surfaces

May 24, 2010

Weiler’s Big Cat™ abrasive flap disks are designed with a thickness and large flap size to conform to curved and irregular surfaces. Multiple layers of coated abrasive material expose sharp, fresh...

Continue Reading

Robotic blast machine automates processing trayloads of components

May 17, 2010

Guyson Corp. has introduced a robotic blasting system that incorporates a component-manipulating, six-axis robot and a shuttle transfer cart to fully automate processing of trayloads of components....

Continue Reading

Abrasive flap disk features trimmable backing - TheFabricator

Abrasive flap disk features trimmable backing

May 3, 2010

Weiler's Trimmable Tiger® abrasive flap disk features a trimmable backing. The design enables the operator to trim away the back of the disk up to 0.375 in. from the original diameter, exposing...

Continue Reading

Pass-through blast system suitable for cleaning parts that cannot withstand tumbling

April 27, 2010

Viking Blast & Wash Systems has announced the release of the CB3624 pass-through blast system. It is suitable for cleaning small or intricate parts that cannot withstand tumbling. The unit has a...

Continue Reading

Angle grinder has autobalancing flange

March 15, 2010

Metabo Corp. has introduced the 6-in. WEPA14-150 Quick small-angle grinder. Its autobalancing flange, pressed onto the spindle, replaces a traditional backing flange. Ball bearings automatically...

Continue Reading

Wheels available for nearly any tungsten electrode grinder

March 5, 2010

Diamond Ground Products offers replacement diamond grinding wheels for nearly any tungsten electrode grinder on the market. The grinding wheels are in stock and ready to ship immediately.

Continue Reading

Deburring system designed with return-to-operator configuration

March 5, 2010

Abtex Corp. has introduced a compact, wet, Tri-Ten planetary-head deburring system in return-to-operator (RTO) configuration. In a single pass, the system deburrs both sides of flat parts up to 4.5...

Continue Reading

Die grinders added to industrial product offerings

March 1, 2010

T.C. Service Co. has introduced a new line of economical die grinders to compliment its industrial products. According to the company, the American-made grinders provide quality performance and...

Continue Reading

Mounted points aid in blending corner welds inside stainless steel tanks, fabrications

February 9, 2010

A line of mounted points for blending corner welds inside stainless steel tanks and fabrications is available from Rex-Cut Products Inc. The mounted points feature a laminated construction of nonwoven...

Continue Reading

Airless, swing-table shotblast system introduced

February 9, 2010

Viking Blast & Wash Systems has announced the release of the 36 ST airless, swing-table shotblast system. The worktable is attached to the blast door, so that when the door is opened, the table swings...

Continue Reading