Stamping Products


Filter Content

Press feed line processes 36-in.-wide CRS coils

October 9, 2007

Peerless Industries has installed a Cooper-Weymouth, Peterson 36-in.-wide conventional press feed line for processing plasma and projection television brackets. The system processes 36-in.-wide coils of CRS from 0.030 in. to 0.164 in. thick with a weight capacity up to 8,000 lbs.The press feed line...

Continue Reading


All-mechanical part transfer system suitable for press or die mounting

September 11, 2007

The series 500 all-mechanical part transfer system from HMS Products Co. is suitable for press or die mounting. The system includes safety clutches to protect the drive train and tooling in X, Y, and Z motions—all axes are driven directly from the slide of the press.Operators can incorporate...

Continue Reading


Coil manipulator facilitates transfer to cart

September 11, 2007

Green Valley Mfg. Inc. has introduced the Titan 2327, a 12,000-lb.-capacity coil manipulator that allows the operator to safely transfer palletized steel coils to a coil cart. The load deck rotates 90 degrees to invert the coil, and a cart is then positioned under the coil for extraction and...

Continue Reading


Data sheet details hydraulic press maintenance programs

September 11, 2007

A two-page data sheet from Schuler Inc. details the company's comprehensive maintenance programs for optimizing oil, power unit, and system component performance of hydraulic presses and systems.The data sheet explains how scheduled filter-exchange procedures can increase equipment service life,...

Continue Reading


Uni-Roller?

Maintain precise control of fluids and lubricants application

August 8, 2007 | By UNIST

UNIST Metalforming Lubrication Systems provide precise control of fluids and lubricants applied to coil and blank stock. Companies interested in evaluating UNIST's stock lubrication in their facilities can request a 30 day trial from the factory.The uni-Roller™ is used to place an even,...

Continue Reading


Spray nozzle connector reduces downtime

August 7, 2007

Industrial Innovations Inc. has introduced the Kwik Spra Release multiconnection system, designed to minimize downtime during die change.The system allows users to leave a set of spray nozzles on the die to avoid repositioning them with every die change. One side of the connector stays with the...

Continue Reading


Die protection module has up to 32 sensor inputs

June 12, 2007

Cieco Inc. now offers up to 32 sensor inputs for the die protection module of the Automator II press controller, twice as many as previously supplied. Each sensor can be programmed individually.Each bank of eight sensors can be programmed to be global (apply to each job), eliminating repetitive...

Continue Reading


Hydraulic presses introduced

June 12, 2007

Greenerd Press & Machine Co. Inc. has introduced a series of hydraulic presses for hot and cold forging. Applications include automotive and truck, aerospace, agricultural, industrial, hardware and tools, and surgical equipment.Produced by Tianjin Tianduan Press Co. in China, the presses can be...

Continue Reading


Sheet metal hemming press requires no hydraulics, plant air

June 12, 2007

Hirotec America offers the E3™ sheet metal hemming press.Twin 20-HP electric motors power the machine's dual-crank drive units and can hem automotive closures without hydraulics or plant air. The electronically coupled dual-crank drive does not require mechanical interlocks, providing...

Continue Reading


Die protection module provides flexible sensor monitoring

May 8, 2007

Cieco Inc. has introduced a new product for its Automator II press controller. The die protection module for the controller now has up to 32 sensor inputs available, twice as many as previously offered, and provides users with flexible sensor monitoring capabilities.Each of the 32 sensors can be...

Continue Reading


Press offers alternative to fine blanking

May 8, 2007

LMC Inc. offers a series of blanking press systems based on adiabatic technology. According to the company, adiabatic blanking can produce parts from virtually any metal and tensile strength and has blanked material in hardness up to 50Rc.The LMC SIP-15B press blanks up to 1,000 parts per minute....

Continue Reading


Press line expanded

May 8, 2007

Greenerd Press & Machine Co. Inc. has expanded its compression molding press line with increased tonnage capabilities up to 10,000 tons and bed sizes exceeding 240 in. The line is suitable for various compression molding applications, from automotive to electrical components, house wares, and...

Continue Reading


Die lifter has up to 450 lbs. force on contact

May 8, 2007

Dadco's patent pending SL2.180 nitrogen gas spring two post lifter is the latest addition to the company's SL series. The new lifter has a 31.8 mm profile, stroke lengths from 25 mm to 125 mm, and force on contact up to 450 lbs.Ᾱone size larger than the SL2.090 that has a 25 mm profile and...

Continue Reading


Tooling systems available for Danobat punch presses

April 10, 2007

Danobat punch press users can select from a full range of high-performance Mate tooling systems to fit their punching requirements. Available systems include Mate Ultra TEC®, Mate Ultra XT™, Mate original style thick turret tooling, and the Mate Ultraform® forming tool...

Continue Reading


Hydraulic press provides precision press parallelism

April 10, 2007

Beckwood Press Co. has recently delivered a hydraulic press made specifically with two-axis active leveling for precision parallelism of the press. This 230 ton capacity press is being used to form radiator tanks for a construction industry manufacturer.The press was specifically engineered for the...

Continue Reading