Finishing Products

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content

Ceramic flap disk provides cool, fast cutting action on hard-to-grind metals

July 14, 2009

Weiler's Saber Tooth™ ceramic flap disk provides cool, fast cutting action on hard-to-grind metals, such as stainless steel. The disk features aggressive, self-sharpening ceramic grain and has a...

Continue Reading

Large vibratory deburring machine introduced

July 14, 2009

Nova Finishing Systems Inc. has introduced the Supernova 2000 large vibratory deburring machine. The 2-cu.-ft., benchtop unit has a 24-in. square metal stand base and a reinforced stainless steel top...

Continue Reading

Shotblast system descales, cleans structural shapes before, after fabrication

July 14, 2009

Wheelabrator structural steel shotblast cleaning systems are designed for descaling and cleaning structural shapes before or after fabrication. The model 2436 uses Autoblast(R) wheels and has a...

Continue Reading

Rotary mesh table cleans small parts offline

June 9, 2009

A Wheelabrator® rotary mesh table system is suitable for cleaning small parts offline using one operator. The machine can process flame-cut shapes, fabrications, automotive parts, aluminum die...

Continue Reading

Preblast roll conveyor provides flexible surface preparation method

May 12, 2009

The Wheelabrator® model 1824 structural preblast roll conveyor machine provides a flexible surface preparation method for a variety of structural shapes prior to fabrication. Preblasting helps...

Continue Reading

Portable hemming unit forms 180-degree hems

May 12, 2009

Roll-Kraft has released a portable hemming unit. The machine forms 180-degree hems on the edges of a flat strip of metal. Hems are found primarily on lighter-gauge material to strengthen the profile...

Continue Reading

Automatic production spray gun suitable for use with automatic, semiautomatic machines

May 12, 2009

The Compact by DeVilbiss™ I and X automatic production spray guns are suitable for use with automatic and semiautomatic machines.The spray guns are small and fit into many applications. Numerous...

Continue Reading

5-stage parts cleaning system has 96-in. wash section

April 14, 2009

A five-stage, all-stainless-steel washer/dryer system is offered by ALMCO KleenTec.The PWRBD24-96E-U system, initially custom-developed for a customer, includes wash, rinse, second rinse, blowoff, and...

Continue Reading

Weld cleaning brush works in hard-to-reach areas

April 14, 2009

Anderson's new Controlled Flare End Brush (CFE) is designed to remove heavy weld spatter, flash, and scale in hard-to-reach areas such as right angles and corners. The patent-pending design of the new...

Continue Reading

Abrasive-belt machine grinding head pivots 360 degrees

March 10, 2009

Dynabrade's Dynafile II air-powered abrasive-belt machine features a grinding head that pivots 360 degrees to access hard-to-reach areas.The machine features a 20,000-RPM, direct-drive air motor that...

Continue Reading

Inline machine cleans castings, forged parts up to more than 25 tons /hr.

March 10, 2009

The Wheelabrator® Continuous Rocker Barrel machine is designed for inline cleaning of castings and forged parts. Several machine sizes are available to satisfy production requirements ranging from...

Continue Reading

Centrifugal disk finisher designed to keep tiny parts from disappearing

February 10, 2009

A new centrifugal disk finisher has been introduced by ALMCO KleenTec Inc. The model ACDF-75 has a bowl with a spinning disk at the bottom. The disk propels the abrasive media upward against the...

Continue Reading

Table-style blast machine features simplified loading, unloading

February 10, 2009

Viking Blast & Wash Systems has released the 48 ST airless swing table shotblast system. The worktable is attached to the blast door, so that when the door is opened, the table swings completely clear...

Continue Reading

Diamond grinding disks suitable for hazardous environment use

February 10, 2009

CS Unitec's Eco Brazing (EB) diamond grinding disks reduce sparking to 1 percent of that produced by resinoid wheels, reports the company, making the disks suitable for use in hazardous environments...

Continue Reading

Right-angle vacuum disk sander removes material from nonferrous surfaces

January 13, 2009

Dynabrade Inc. has introduced a 5-in.-dia. vacuum disk sander for coatings removal. The tool features a 1.3-HP air motor for controlled sanding. Its vacuum shroud uses brushes to capture airborne...

Continue Reading