Tube and Pipe Fabrication Products

The tube and pipe fabrication technology area covers sawing (band, circular, and friction) and other cutting processes, such as abrasive, flame, laser, oxyfuel, plasma, and waterjet. It also discusses forming processes, including bending and end forming. Finally, it includes a handful of miscellaneous processes, such as trimming, beveling, finning, grooving, threading, and spinning.

Filter Content

Polyurethane spring designed for I/O jaw tooling

June 12, 2007

Eagle Precision Technologies Ltd. has introduced a polyurethane spring—called a peanut—for its range of I/O jaw tooling.The patent-pending spring is designed for placement between each...

Continue Reading

Rotary cut-to-length machine has servo-positioning, inline end-form unit

June 12, 2007

J&B Industries has added to its product line a rotary cut-to-length machine with a servo-positioning, inline end-form unit.The unit has servo-driven feed and pull-apart mechanisms. The end-form unit...

Continue Reading

Adjustable attachment bends to 2 in. dia. bars

June 12, 2007

Piranha offers an adjustable bar-bending attachment to its ironworkers to allow bending of round bars from to 2 in. dia.The fixture, which includes all required tooling, bends up to 90 degrees on...

Continue Reading

Double-end deburring machine designed for extrusions

June 12, 2007

Kent Corp. has introduced a double-end deburring machine, designed for extrusion ends.The machine, which includes a fixed head and an adjustable head, uses two 12-in.-OD cup brushes per side. Spinning...

Continue Reading

Pipe sander conceals weld seams, finishes stainless steel

June 12, 2007

CS Unitec's pipe sander conceals weld seams and provides a high-gloss finish on stainless steel. With an 11-amp, variable-speed electric or a 1-HP pneumatic motor with high torque, the sander finishes...

Continue Reading

Automatic feed clamp system simplifies pipe cutting

May 8, 2007

A portable pipe clamp system with automatic feed is available from CS Unitec for use with the company's portable pneumatic hacksaw.The system easily attaches to the hacksaw and pipe and operates off...

Continue Reading

Custom-designed deburring brushes offered

May 8, 2007

Weiler Corp. offers crimped wire wide face brushes specially engineered to meet each user's specific requirements. The custom-made brushes are effective for many deburring applications, especially...

Continue Reading

Tube cutoff system designed for short production runs

May 8, 2007

T-Drill Industries has introduced the TCJ-50 tube cutoff system that extends its chipless rotary cutoff technology into a small, bench mounted system designed for short production runs from straight...

Continue Reading

End prep tool features chatter-free performance

April 10, 2007

A lightweight welding end prep tool and cutter blades that are capable of performing any angle of prep and facing and boring simultaneously are available from ESCO Tool.The Mongoose MILLHOG® right...

Continue Reading

Saw kit designed for professional tradesmen

April 10, 2007

The M.K. Morse Co. recently introduced a master tradesman AV23M bimetal hole saw kit. Featuring Master Cobalt® bi-metal hole saws, the kit includes a range of popular diameters used by the...

Continue Reading

Hitch feed saw automatically loads, trims, cuts, sorts

March 13, 2007

Scotchman® Industries CPO 315 fully automatic hitch feed cold saw provides uninterrupted cutting on tubing or solids. The CPO 315 HFA comes equipped with either a supply table or a full-bundle...

Continue Reading

Strainer protects piping system components

March 13, 2007

Eaton Filtration LLC's Model 50 duplex basket strainer is designed to protect piping system components, such as meters, pumps, and instrumentation, from damage and helps prevent unscheduled downtime,...

Continue Reading

Multipurpose beveling machine offered

February 13, 2007

CS Unitec's beveling machine bevels, deburrs, and chamfers steel, stainless steel, nonferrous metals, and brass.The compact, lightweight machine is designed to be used with two interchangeable milling...

Continue Reading

Machine automatically deburrs one end of part

February 13, 2007

Kent Corp. has introduced a new Burrmaster deburring machine to automatically deburr one end of a part.The Rotomat utilizes a 12 in. dia. by 6 in. wide brush. The brush spins downward at 2,000 RPM,...

Continue Reading

Metal-cored electrode designed for cast irons

January 9, 2007

Select-Arc's 2216-C metal-cored electrode is designed to weld cast irons that demand increased strength at relatively higher temperatures. It is suitable for joining cast irons to alloy and carbon...

Continue Reading