Sawing Products

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content

Redesigned metal saws leave workable edge

April 29, 2015

Fein Power Tools Inc. offers three redesigned Slugger saw models: two metal cutting hand saws with 7.25- and 9-in. blades, and a 14-in. metal chop saw. The 7.25-in. saw has a double-insulated 1,400-W, 120-V, 120-amp, 3,800-RPM soft-start motor for providing continuous power. The blade cover...

Continue Reading

Horizontal band saw features servo-driven precision downfeed control

April 22, 2015

Behringer Saws Inc. offers the HBE Dynamic series horizontal band saw. The compact automatic saw features a servo-driven precision downfeed control that adjusts blade pressure automatically, creating a balance of feed rate and pressure to help improve quality and cutting rates and extend blade...

Continue Reading

Automatic band saw monitors cutoff jobs for accuracy

April 13, 2015

The Jupiter CN band saw from Pat Mooney Saws pivots from 0 to 60 degrees to set up a miter cut in seconds, the company states. The control can store 99 cutting jobs while minimizing scrap, states the manufacturer. Cutoff programs are managed via the control keypad. The user inputs the desired...

Continue Reading

Panel saw cuts sheet material, strips cable

March 25, 2015

The KS-426 panel saw from Kett Tool provides the ability to strip aluminum and steel-clad cable and cut sheet material with one tool. It features a positive depth-stop, allowing the user to set the saw blade deep enough to cut cable sheathing, but not the cable itself. The saw uses a 2,500-RPM,...

Continue Reading

Band saw offers large capacity, pivoting saw head

March 20, 2015

Pat Mooney Saws has introduced the Pegasus GV gear-driven miter band saw. With its cutting accuracy and squareness, large capacity, and pivoting saw head, the saw is suitable for use in iron, steel, and structural steel fabrication. The swivel saw head has a precision protractor and a 0- to...

Continue Reading

Cold saw designed for high-volume sawing of steel tubes

March 18, 2015

Pat Mooney Saws offers the Matic 315 CM 1B fully automatic circular cold saw designed for high-volume sawing of steel tubes. The machine comes standard with an automatic loading system that includes an automatic bundle loader capable of running long production runs. A heavy-duty pivoting saw...

Continue Reading

Circular cold saw offers speed of abrasive saw

February 26, 2015

Pat Mooney Saws has introduced the Saturn circular cold saw. According to the manufacturer, the saw offers the speed of an abrasive saw and the capacity of a traditional band saw. With its cutting accuracy, squareness, large capacity, and pivoting saw, the machine is suitable for a variety of...

Continue Reading

Extra features added to horizontal band saw

January 22, 2015

Behringer has added more standard features to its HBE Dynamic series horizontal band saws. The saws now include automatic precision servo downfeed control and blade protection sensor technology. A sensor-driven cutting pressure control is located at the back of the saw blade. Positioning the...

Continue Reading

Heavy-duty cutoff saw system

January 5, 2015

TigerStop has introduced TigerSaw Ferrous, a fully automated, heavy-duty, precision ferrous metal cutoff saw and push feed. The column saw has mitering capabilities from 60 degrees left to 45 degrees right. The system is designed to cut tube, pipe, and barstock up to 42 ft. long. Features...

Continue Reading

Carbide-tipped saw blade handles austenitic stainless steel tube

November 26, 2014

Kinkelder offers Connexxioncut 4 (CX4) carbide-tipped saw blades for cutting of 300 series stainless steel tubes from 0.12 to 0.24 in. thick. Based on a constant cutting speed of 262.47 FPM and constant tooth load of 0.002 in./tooth, the blades cut 2.36- by 0.16-in. tube in less than 4 sec.,...

Continue Reading

Tungsten carbide-tipped circular saw blades designed for tube and pipe cutting

November 25, 2014

New-Form Tools has added tungsten carbide-tipped (TCT) circular saw blades to its metal cutting product line. The blades are designed to address the specifications of the tube and pipe industry. The blades, which produce a burr-free cut through steel materials, are coated for up to 4 to 10 times...

Continue Reading

Metal saws leave workable edge

November 25, 2014

Fein Power Tools Inc. has introduced three new Slugger saw models that leave a workable edge when making straight or bevel cuts up to 45 degrees on steel plate, angle, pipe, and square or round tube. The new 7.25-in. metal hand cutting saw has a double-insulated, 1,400-W, 120-V, 12-amp,...

Continue Reading

Blade drive updated on vertical tilt-frame band saw

November 20, 2014

Marvel Mfg. Co. has made changes to its 8-Mark-II vertical tilt-frame band saw. In addition to a new powder coating and paint color scheme, the saw features a blade drive upgraded from a 2- to 5-HP motor and controlled with a variable-frequency drive. The blade speed control dial has moved from the...

Continue Reading

CNC hitch feed automatic saw maintains length tolerance of +/-0.006 in. per index

October 30, 2014

The CPO 315 HFA CNC hitch feed automatic saw from Scotchman is fully programmable. It cuts tube and pipe up to 3.5 in. dia. and solid material up to 1.75 in. while maintaining a length tolerance of +/-0.006 in. per index. According to the manufacturer, the first part cut is always accurate. The...

Continue Reading

Nonferrous cross-cutting system puts large-shop automation in reach

October 28, 2014

TigerStop’s TigerSaw 1000 is a fully automated and integrated cross-cutting system for aluminum and other nonferrous metals. It features a heavy-duty build, 18-in. saw paired with a pusher system for single-piece flow or pack sawing applications up to 26 ft. The system uses Dynamic...

Continue Reading