Waterjet Cutting Products

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content

Waterjet's cutting area almost same size as machine

January 10, 2014

TECHNI Waterjet™ has introduced the Techjet-X3® 4100-G gantry-style waterjet cutting system. The machine's cutting area (6 ft. 7 in. by 13 ft. 2 in.) is nearly the same size as the machine (7 ft. 10 in. by 14 ft. 5 in.), helping to save facility space. The waterjet machine comes...

Continue Reading

Waterjet cutting system's small size contributes to energy efficiency - TheFabricator.com

Waterjet cutting system's small size contributes to energy efficiency

December 12, 2013

Sugino Corp. has introduced the Katana2 waterjet cutting system for cutting titanium, stainless steel, and copper. Utilizing an extra-fine abrasive nozzle, the machine can achieve cutting diameters as low as 0.012 in. at pressures up to 43,500 PSI. With a footprint of 57 by 81 in., the machine...

Continue Reading

Plasma cutting system, waterjet system introduced

December 3, 2013

Hypertherm has introduced the new Powermax125 plasma cutting and gouging system. According to the company, the system delivers the most power of any portable air plasma system currently available. The machine features a 1.5-in. recommended cut capacity. It can sever 2.5-in.-thick metal while...

Continue Reading

Waterjet robot allows 6-axis cutting - TheFabricator.com

Waterjet robot allows 6-axis cutting

November 27, 2013

WARDJet has introduced the multipurpose waterjet robot. It integrates waterjet cutting with end-of-arm tooling to achieve 6-axis cutting. A seventh axis is possible with the addition of a headstock/tailstock fixture that rotates the part while the robot cuts around it. The robot is a...

Continue Reading

Software features added to laser, bending, and waterjet machines - TheFabricator.com

Software features added to laser, bending, and waterjet machines

November 18, 2013

Bystronic Inc., Elgin, Ill., has introduced new software features to its laser, bending, and waterjet product lines. PartID is a new feature of the Bystronic BySoft 7 CAD/CAM software. The identification code is generated with BySoft 7and then laser-engraved onto the part utilizing a Bystronic...

Continue Reading

Control software optimizes waterjet tool paths - TheFabricator.com

Control software optimizes waterjet tool paths

October 21, 2013

OMAX® Corp. has introduced Intelli-MAX® 20 intuitive control software that automatically optimizes the tool paths of the company's abrasive waterjet systems. The new automatic tool path planning engine in the software improves the artificial intelligence of the waterjets, creating less...

Continue Reading

Abrasive waterjet machine cuts small parts - TheFabricator.com

Abrasive waterjet machine cuts small parts

October 11, 2013

OMAX® has introduced the MicroMAX™ JetMachining® Center for abrasive waterjet cutting of parts or part features smaller than 0.012 in. from a variety of materials, including exotic metals, advanced composites, polymer thermoplastics, and glass. Suitable for prototype development...

Continue Reading

CAM, nesting software supports waterjet beveling - TheFabricator.com

CAM, nesting software supports waterjet beveling

September 3, 2013

Jetcam Intl. s.a.r.l. has introduced a new release of its Jetcam Expert CAM and nesting software that includes native support for beveling on compatible OMAX® CNC waterjet machines. The update to software and postprocessors, suitable for all sheet bevel cutting requirements, is available...

Continue Reading

Waterjet machines offered in basic, high-speed models - TheFabricator.com

Waterjet machines offered in basic, high-speed models

July 16, 2013

WardJet Inc. has introduced the J-series and L-series waterjet cutting machines. The J-series is an economically priced, water-only waterjet. Using belt drive technology, it can cut at speeds of 2,500 IPM with an acceleration and deceleration rate of 0.2 m/s2. It is suitable for companies...

Continue Reading

Waterjet cutting system includes dual cutting heads

June 25, 2013

The Bystronic ByJet Smart waterjet cutting system features high-precision, dual cutting heads for fast part throughput; abrasive metering; and constant automatic nozzle height sensing. The pump’s reliability helps increase service intervals, the manufacturer states. The cutting bridge is fitted...

Continue Reading

Waterjet system includes features of higher-priced machines - TheFabricator.com

Waterjet system includes features of higher-priced machines

June 19, 2013

WardJet has released the Emerald series waterjet, designed for low cost. Operators can load material into the cutting area from all four sides. The machine can index sheets of unlimited length in all directions. The unit's mini hopper features nine preset abrasive flow rates. The ball screw...

Continue Reading

Taper compensation added to waterjet system

June 12, 2013

The Mach 2c waterjet system from Flow Intl. Corp. now is available with Dynamic Waterjet® taper compensation. The technology adjusts taper angle with speed to help improve accuracy. Dynamic Waterjet with Active Tolerance Control™ counters taper and stream lag using SmartStream™ mathematical...

Continue Reading

Unit helps make abrasive recycling possible for any size waterjet company - TheFabricator.com

Unit helps make abrasive recycling possible for any size waterjet company

June 10, 2013

WARDJet Inc. has announced design changes to its Ward Pro system that make abrasive recycling possible for waterjet companies of all sizes. The unit takes sludge abrasive from the tank in a controlled manner, separates the reusable abrasive, and dries it. The dry abrasive is transported...

Continue Reading

Hopper disposes waste waterjet garnet - TheFabricator.com

Hopper disposes waste waterjet garnet

June 10, 2013

Barton Intl. has introduced the BART® Tip Hopper. Designed to be placed next to a waterjet cutting table, the self-dumping hopper serves as a disposal vessel for waste garnet abrasive. During abrasive removal, overflow water is returned to the waterjet table. The 0.75-cu.-yd. hopper...

Continue Reading

Waterjet cutting system includes double ball screw protection - TheFabricator.com

Waterjet cutting system includes double ball screw protection

March 4, 2013

The Phantom waterjet cutting series from Semyx features stainless steel covers and tanks and double protection for the ball screw. It operates in all axes driven by ball screw. The machine has a separate custom tank that allows flexibility for waterjet transportation with front rollers that...

Continue Reading