Products

Filter Content

SAW power source allows switching between AC, DC without stopping welding process

December 20, 2011

ESAB Welding & Cutting Products has introduced the Aristo 1000 AC/DC power source for SAW. The inverter power source, which can be connected to three-phase input voltage supply (from 380 to 575 V at 50 or 60 Hz), uses patent-pending technologies to deliver high-quality welding with low power...

Continue Reading

Metal-cored wire for robotic, automated welding applications suitable for welding nonalloyed and fine-grain steels - TheFabricator.com

Metal-cored wire for robotic, automated welding applications suitable for welding nonalloyed and fine-grain steels

December 20, 2011

Hobart Brothers offers Hobart® FabCOR® 86R gas-shielded, metal-cored wire for robotic and automated welding applications. The wire operates on both constant-voltage (CV) and pulsed welding power sources and is suitable for welding nonalloyed and fine-grain steels, rail cars, storage...

Continue Reading

Low-profile safety light curtain designed for use on smaller production machines

December 20, 2011

Banner Engineering Corp. has introduced the EZ-SCREEN® low-profile safety light curtain with integral muting. Designed for use on smaller production machines, the Type 4 safety light curtain performs in compact spaces. Integral muting adds flexibility for mounting, hookup options, and...

Continue Reading

Pneumatic-tire forklift lifts loads up to 17,500 lbs, heights up to 26 ft.

December 20, 2011

Nissan Forklift Corp. has introduced the GO6 series heavyweight, pneumatic-tire forklift truck to its Platinum line. Featuring a diesel engine, the truck can lift loads of up to 17,500 lbs. and heights of up to 26 ft. The engine’s turbo charger creates more power by forcing compressed air into...

Continue Reading

Minimal footprint band saws designed to meet daily production requirements

December 20, 2011

Peddinghaus Corp. offers Eco-Line band saws for cutting steel. Designed to meet daily production requirements, the saws work quickly and efficiently and have a minimal footprint, the company reports. The saws can cut at 30-, 45-, 90-, and 135-degree angles. They facilitate the integration of...

Continue Reading

MERV 16-rated environmental control booth provides HEPA-level filtration - TheFabricator.com

MERV 16-rated environmental control booth provides HEPA-level filtration

December 20, 2011

Tri-Mer Corp. has introduced the Tri-Flow environmental control booth. Designed for use in plant areas where dirty or noisy tasks need to be confined to their own workspace, the booth provides HEPA-level filtration performance and has a MERV 16 rating. It is 99.999 percent efficient on particles...

Continue Reading

Grinding wheel for aluminum leaves no unwanted residue on workpiece

December 20, 2011

The SGP Whisper-ALU reinforced grinding wheel from Pferd Inc. features a patented design that allows it to grind aggressively on aluminum and nonferrous metals while reducing noise and vibration and eliminating clogs. With no fillers, the wheels leave no unwanted residue on the workpiece; ground...

Continue Reading

Inline, 2-D optical micrometer available in three sensor head sizes - TheFabricator.com

Inline, 2-D optical micrometer available in three sensor head sizes

December 14, 2011

The new TM-3000 2-D optical micrometer from Keyence is designed to combine the functionality of a laser scan micrometer, machine vision system, and optical comparator into a single device for 100 percent automated high-speed, inline, or offline measurement and inspection applications. It is...

Continue Reading

Robotic GMAW gun series expanded - TheFabricator.com

Robotic GMAW gun series expanded

December 14, 2011

Tregaskiss has expanded its TOUGH GUN™ ThruArm™ G2 series of robotic GMAW guns to include configurations for robots from ABB, FANUC, Kuka, and OTC. The guns' alignment features help maintain tool-center point for reliability and consistency. The series includes low-stress robotic...

Continue Reading

Computer-assisted quoting software creates simple to complex quotes

December 14, 2011

Quik Quote™ quoting software is an Excel® worksheet that uses computer-assisted quoting technology to create simple to complex quotes, regardless of an individual's computer skills. The software provides nine modules that can have different labor rates with unlimited expansion. According to the...

Continue Reading

Coated stainless steel strip designed for electronic component manufacturers

December 14, 2011

Sandvik has introduced Sandvik Santronic™, a coated stainless steel strip designed for electronic component manufacturers. It can serve as an alternative material for postprocessed electroplated parts in stainless steel or copper-based alloys. The strip offers high-purity, thin-coated layers of...

Continue Reading

10-post hydraulic press has five zones of force control - TheFabricator.com

10-post hydraulic press has five zones of force control

December 14, 2011

Beckwood Press Co. has delivered a 10-post, hydraulic, heated-platen press with five zones of force control, each consisting of two hydraulic cylinders. The press is used in the compression molding of honeycomb panels for application in various industries. The 10-post design reduced the...

Continue Reading

Portable measuring system features dynamic referencing function

December 6, 2011

MoveInspect from Aicon, a portable measuring system that works with high-resolution digital cameras and a hand-held probe, features a dynamic referencing function that compensates for object and measuring device movement so they do not affect results. The system uses optical reference points so...

Continue Reading

Clamshell straightener facilitates roller inspection, cleaning - TheFabricator.com

Clamshell straightener facilitates roller inspection, cleaning

December 6, 2011

Coe Press Equipment has announced the availability of its new clamshell straightener with a design that allows the top rollers to rise up and separate from the bottom rollers to provide access for inspection and cleaning of the rolls. With this open-head feature, users can ensure the rolls are...

Continue Reading

Fiber-guided, solid-state laser cuts construction steel, stainless steel, aluminum, and nonferrous metals - TheFabricator.com

Fiber-guided, solid-state laser cuts construction steel, stainless steel, aluminum, and nonferrous metals

December 6, 2011

TRUMPF Inc.'s TruLaser 5030 fiber, with a TruDisk fiber-guided solid-state laser, is designed for cutting parts out of thin sheet material at high speeds. In fusion cutting of stainless steel up to 0.16 in. thick, the fiber achieves feed rates up to three times faster than the CO2 version,...

Continue Reading