Finishing Products

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content

Masking resin protects during dry, wet chemical surface treatment

September 12, 2006

Dymax Corp. offers SpeedMask® UV- curable masking resins to protect complex, high-performance turbine components, orthopedic implants, implant hardware, surgical instruments, and medical devices...

Continue Reading

Custom-made brushes automate tube-end deburring

August 8, 2006

Weiler Corp. offers custom-made brushes in a range of sizes suitable for tube-end deburring.The brushes allow users to automate the tube-end deburring process and improve user safety, assembly...

Continue Reading

Biodegradable metal cleaners designed for ultrasonic, spray-wash equipment

August 8, 2006

Technotrade Intl. Inc.'s Deconex® cleaning products for metals are biodegradable, water-based, and suitable for use in ultrasonic cleaning and spray-wash equipment.More than 30 different...

Continue Reading

Burnisher features electronic speed stabilization

June 13, 2006

Metabo Corp.'s SE 12-115 burnisher for finishing and polishing stainless steel includes the company's VTC (Vario Tacho Constamatic) electronic speed stabilization.The 6.25-lb. burnisher's motor has a...

Continue Reading

Blast unit removes rust, scale from plate, structurals

May 9, 2006

Viking Blast & Wash Systems has released the RT 9616-SP plate and structural blasting unit. The machine removes rust and scale from exterior surfaces of plate up to 8 ft. wide and 3 in. high and...

Continue Reading

Parts washer has oscillating vertical spray column

April 11, 2006

Landa Cleaning Systems offers the Power Scan Wash (PSW) hot water parts washer with a vertical spray column that oscillates, increasing the cleaning action and wash-water dwell time.Parts are placed...

Continue Reading

Soak solution rust remover is water based

April 11, 2006

The Evapo-Rust™ water-based rust remover from Daubert Cromwell is a soak solution that helps eliminate flash rust in a minimum of 10 minutes and deep rust in hours.With a neutral pH, the fluid...

Continue Reading

Disbonder gel effective on hard-to-remove coatings

April 11, 2006

Interplus® 634 paint disbonder gel from International Paint LLC has low VOCs and is effective on hard-to-remove coatings such as polyurethanes, alkyds, acrylics, and waterborn coatings. It does...

Continue Reading

Desiccant dryer removes water, vapor, oil aerosols, dirt

March 7, 2006

Motor Guard Corp. has introduced the DD-1008 mini desiccant dryer.The dryer is a disposable, inline, point-of-use filter that features a color-change indicator when replacement is necessary.Attached...

Continue Reading

Metal surface finishing system introduced

March 7, 2006

J. Walter has introduced the QUICK-STEP™ metal surface finishing system.The system utilizes a hook-and-loop backing pad for attachment; 40-, 60-, 80-, or 120-grit segmented flap disks;...

Continue Reading

Weld blend kit works on stainless steel, aluminum

December 13, 2005

Rex-Cut Products' Rex-Cut® Grind and Blend Kit removes heavy welds on stainless steel and aluminum.The kit includes a Sigma Green wheel featuring a zirconia-ceramic grain and proprietary bonding...

Continue Reading

Dry film lubricant offers enhanced adhesion, cohesive energy density

December 13, 2005

GYG USA Inc. offers Proform dry film lubricant, developed by Xaio Science Group LLC. It is a waterborne polymer system with a combination polar and nonpolar structure and interpenetrating polymer...

Continue Reading

Finishing gel designed for large parts

December 13, 2005

Antiquing gels from Birchwood Casey provide large-part finishing of metal components, including copper, brass, and bronze, without running or dripping.The gel is available in three types: PRESTO...

Continue Reading

System prevents corrosion under insulation

December 13, 2005

The Intertherm® Cold Spray Aluminum anticorrosion system from International Paint LLC, an Akzo Nobel company, is designed to prevent corrosion under insulation (CUI) in chemical and petrochemical...

Continue Reading

Angle grinders feature reduced gear noise, vibration

December 13, 2005

DeWalt offers a new line of 4 -in., heavy-duty, small angle grinders in three models.The D28402, D28112, and D28110 are constructed with a jam-pot gear case—an industry first on a grinder, the...

Continue Reading