Products

Product releases on thefabricator.com represent the gateway to production efficiency for many metal fabricators. These write-ups cover cutting edge developments in automation, CAD/CAM software, finishing technology, folding equipment, laser cutting machines, machining technology, plasma cutting, power tools, press brakes, punching machines, saws, shop management software, stamping presses, tube and pipe fabrication equipment, waterjets, welding technology, and other areas of fabricating activity. Anyone interested in sending a product news release to thefabricator.com should send it to press_releases@thefabricator.com

Filter Content

Hardness testers introduced - TheFabricator.com

Hardness testers introduced

May 31, 2011

The MicroMet 6000 series, a new class of dead-weight microindentation Vickers/Knoop hardness testers, is available from Buehler. The unit's hybrid user interface combines a touchscreen LCD for setup and data entry with hard-switch buttons for daily operation. A tabbed menu structure enables...

Continue Reading


Ergonomic manipulator available in load capacities of 330, 550, and 880 lbs. - TheFabricator.com

Ergonomic manipulator available in load capacities of 330, 550, and 880 lbs.

May 31, 2011

The pneumatically powered Famatec Friendly ergonomic manipulator from Haeco counterbalances heavy loads to allow an operator to suspend, rotate, tilt, and transfer product with precision and reduced effort. Equipped with appropriate end-of-arm tooling, three different models offer load...

Continue Reading


Cleaner, degreaser has blend of biodegradable detergents formulated for industrial applications - TheFabricator.com

Cleaner, degreaser has blend of biodegradable detergents formulated for industrial applications

May 23, 2011

Mean Green® industrial-strength cleaner and degreaser from CR Brands Inc. has a blend of biodegradable detergents formulated for industrial applications. The product dissolves grease and grime quickly and lifts stains off all surfaces without environmentally harmful solvents. It is suitable...

Continue Reading


End prep tool features air power-assisted clamping - TheFabricator.com

End prep tool features air power-assisted clamping

May 23, 2011

The MILLHOG® Mongoose Air Clamp™ end prep tool from Esco Tool features air power-assisted clamping for instant attach and release to the tube or pipe ID. Developed for repetitive end preps on tubes from 0.5 to 3 in. OD, the tool is suitable for use on boiler panels in limited-access...

Continue Reading


Flexible abrasive wheels offer extended wear - TheFabricator.com

Flexible abrasive wheels offer extended wear

May 23, 2011

Smooth Touch™ flexible, cotton-fiber abrasive wheels for pipe thread cleaning, polishing, and blending have been introduced by Rex-Cut Products Inc. They are made of cotton fiber impregnated with abrasives and a proprietary bond that allows them to last up to five times longer than...

Continue Reading


Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water - TheFabricator.com

Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water

May 23, 2011

Jet Edge Inc. has introduced the iP60-150, a 150-HP, 60,000-PSI waterjet intensifier pump. It can produce up to 3 GPM of ultrahigh-pressure water for precision waterjet cutting and UHP surface preparation applications. It supports orifices up to 0.025 in. and features dual intensifier systems....

Continue Reading


GMAW wire introduced for welding API X80 grade pipe, root passes on up to X100 grade - TheFabricator.com

GMAW wire introduced for welding API X80 grade pipe, root passes on up to X100 grade

May 23, 2011

Lincoln Electric has added the new Pipeliner® 80Ni1 GMAW wire to its line of Pipeliner consumables. It is designed for semiautomatic or automatic welding of root, hot, fill, and cap passes on up to API X80 grade pipe and root passes on up to X100 grade pipe. The wire can produce impact...

Continue Reading


Raster-to-vector conversion software updated with new tools - TheFabricator.com

Raster-to-vector conversion software updated with new tools

May 23, 2011

Arbor Image Corp. has released the latest version of Cutting Shop raster-to-vector conversion software for fabrication and artistic design applications. The software takes an original scanned-in paper drawing or digitized photograph and converts it from pixels to lines and arcs. This latest...

Continue Reading


High-volume wet blast machines clean, descale, degrease surfaces in single operation - TheFabricator.com

High-volume wet blast machines clean, descale, degrease surfaces in single operation

May 16, 2011

Rosler's KS series wet blast machines come in standard machine cabinet sizes from 28 to 60 in. square with a variety of sump and media capacities. According to the manufacturer, the machines provide uniform media flow and high finish control. The high-volume, self-contained machine uses a...

Continue Reading


Autodarkening welding helmet features self-contained personal respirator - TheFabricator.com

Autodarkening welding helmet features self-contained personal respirator

May 16, 2011

Miller Electric Mfg. Co. has added the heavy-duty Titanium 9400i autodarkening welding helmet to its Arc Armor® powered air purifying respirator (PAPR) line. The PAPR units are self-contained personal respirators designed to protect the welder from hazardous welding fumes found in some...

Continue Reading


Open-table CO2 laser machine allows position to be monitored, corrected as needed by the CNC - TheFabricator.com

Open-table CO2 laser machine allows position to be monitored, corrected as needed by the CNC

May 16, 2011

Bell Laser LLC offers the BL-C-4896-400 open-table, CNC laser machine. The rigid, precision-cutting machine features a ball-screw servomotor drive that serves as a closed-loop feedback system, allowing the position to be monitored and corrected as needed by the CNC. The welded steel frame...

Continue Reading


Plasma cutting technology for mild steel introduced - TheFabricator.com

Plasma cutting technology for mild steel introduced

May 16, 2011

Kjellberg Finsterwalde has introduced Contour Cut plasma cutting technology for mild steel on its HiFocus plasma cutting systems with PerCut 200/210 and PerCut 440/450 plasma torches. On small inside and outside contours, small webs, and other fine contours, angular deviation varies between 2...

Continue Reading

Updated and optimized CAD/CAM, nesting software available in three versions

May 16, 2011

Jetcam has released version 16.20.02 of its Expert CAD/CAM and nesting software. The new version contains an entirely new entry-level product, as well as many new features. Three versions are available: Expert 1, Expert Premium, and Expert Lite. The latter excludes some of the automation of the...

Continue Reading


Aluminum stud welding machine can weld 0.50-in. threaded studs - TheFabricator.com

Aluminum stud welding machine can weld 0.50-in. threaded studs

May 16, 2011

Nelson Stud Welding®, part of the Doncasters Group of precision engineering companies, has developed a stud welding machine for use in a customer's shipyard to weld aluminum hulls. The portable stud welding machine can weld 0.50-in. threaded studs, which can be carried right into the bowels...

Continue Reading


Regulator technology available in expanded lineup - TheFabricator.com

Regulator technology available in expanded lineup

May 9, 2011

Thermadyne® Industries' Victor® brand has announced that its EDGE™ regulator technology is becoming available in an expanded lineup. Victor VGS, CSR, and AF 250 regulators will transition to EDGE ESS4 series high-capacity and EDGE ESS3 series medium-capacity regulators for air, acetylene,...

Continue Reading