Products

Product releases on thefabricator.com represent the gateway to production efficiency for many metal fabricators. These write-ups cover cutting edge developments in automation, CAD/CAM software, finishing technology, folding equipment, laser cutting machines, machining technology, plasma cutting, power tools, press brakes, punching machines, saws, shop management software, stamping presses, tube and pipe fabrication equipment, waterjets, welding technology, and other areas of fabricating activity. Anyone interested in sending a product news release to thefabricator.com should send it to press_releases@thefabricator.com

Filter Content

Laser-based seam finder for arc welding robots introduced

November 8, 2010

Motoman Robotics has introduced a new laser-based seam finder for its arc welding robots. The Accufast noncontact laser seam finder is compact, mounted inline with the welding torch, and compatible with Motoman Robotics' through-arm torch design robots. Macro job routines help simplify...

Continue Reading


Mobile pallet wrapper wraps up to 25 loads/hr. - TheFabricator.com

Mobile pallet wrapper wraps up to 25 loads/hr.

November 1, 2010

GaleWrap, an ITW Corp. company, offers the GW-3500™ all-in-one mobile pallet wrapper and pallet jack as an alternative to conventional hand wrapping. The unit wraps up to 25 loads/hr., runs at 11 RPM, and offers a wrapping height of 71 in. The pallet is 32 to 40 in. wide by 48 in. long....

Continue Reading

GTAW torches designed for use on thin materials, limited-access joints

November 1, 2010

Weldcraft offers two Micro-Tig® torches for use on thin materials and limited-access joints. According to the manufacturer, both torches feature lightweight, short torch bodies that allow penlike control on complex applications, including those in the aircraft and aerospace industries, artistic...

Continue Reading

Chip vacuum can be moved from drum to drum to separate materials for recycling

November 1, 2010

Exair's new Chip Vac picks up chips and delivers them to an ordinary 30-gal. drum. It can be moved from drum to drum to keep different materials separate for recycling. It is used to clean chips from fixtures, floors, and work surfaces of saws, machining centers, and other industrial equipment....

Continue Reading

GMAW wire boxes upgraded with bulk quantities, minipallets, side-view windows

November 1, 2010

Lincoln Electric has upgraded its 500- and 1,000-lb. Accu-Pak® boxes for its SuperArc® GMAW wire for robotic welding applications with bulk quantities, minipallets and new side-view windows. The forklift-ready, corrugated cardboard minipallets are available for both box sizes. The boxes and...

Continue Reading


Multiprocess abrasive wheels designed to eliminate frequent wheel changes - TheFabricator.com

Multiprocess abrasive wheels designed to eliminate frequent wheel changes

November 1, 2010

CGW-Camel Grinding Wheels has expanded its line of abrasive wheels with the introduction of its three-in-one combo wheels, which allow for cutting, grinding, and finishing with one wheel, eliminating frequent wheel changes. When the user tilts the right-angle grinder to a 90-degree position,...

Continue Reading


Fiber laser cutting system has all components in single package - TheFabricator.com

Fiber laser cutting system has all components in single package

November 1, 2010

Hypertherm has announced the release of a new fiber laser cutting system that includes all components in one package. TheHyIntensity™ fiber laser HFL015 system includes the power source, cutting head, gas supply, operator interface consoles, motion controls, and software. The system...

Continue Reading


Epoxy system developed for coating and lining storage tanks, piping, scrubbers, processing equipment - TheFabricator.com

Epoxy system developed for coating and lining storage tanks, piping, scrubbers, processing equipment

November 1, 2010

Developed for coating and lining storage tanks, piping, scrubbers, and processing equipment, Master Bond EP21ARHT resists chemicals, fuel, and acids. It can withstand immersion to 96 to 98 percent sulfuric acid and 20 percent hydrochloric acid for more than a year. This two-component epoxy...

Continue Reading


GMAW/FCAW control system allows point-of-use voltage control more than 100 ft. from power source - TheFabricator.com

GMAW/FCAW control system allows point-of-use voltage control more than 100 ft. from power source

October 25, 2010

Miller Electric Mfg. Co. has introduced the XMT® Weld Cable Control (WCC) system, which comprises an XMT 350 or XMT 456 multiprocess welding inverter, a voltage-sensing SuitCase® X-TREME™ WCC wire feeder, and a WCC. The GMAW/FCAW system allows welders working more than 100 ft....

Continue Reading


Reduced-noise vibratory tub measures 95 in. long, 35 in. wide, and 33 in. deep - TheFabricator.com

Reduced-noise vibratory tub measures 95 in. long, 35 in. wide, and 33 in. deep

October 25, 2010

Viking Blast & Wash Systems has released the 54S vibratory tub. This 54-cu.-ft. shaker offers a tub measuring 95 in. long by 35 in. wide by 33 in. deep. The tub is lined with a urethane body liner and manganese end liners. The 1-in. acoustic foam insulated cabinet, along with the internally...

Continue Reading

Slitting tooling system expanded

October 25, 2010

Mate Precision Tooling offers an expanded LongLife™ slitting tool system. The system, which combines premium tool steel punch and die inserts with punch and die holders, now includes inserts in lengths from Size 56, 0.787 to 2.205 in., and Size 76, 2.206 to 3.000 in. Widths are available up to...

Continue Reading

Gas pressure regulators introduced

October 25, 2010

WITT-Gasetechnik has introduced two new dome pressure regulators for a variety of applications and technical gases. Models 747LE and 757LE offer a pipe diameter of up to 2 in. and an increased maximum flow rate over a variety of pressures. They are suitable for users who need constant gas pressure...

Continue Reading


Ultrathin cutoff wheels cover Type 01 straight, Type 27 depressed-center 4 to 6 in. wheels - TheFabricator.com

Ultrathin cutoff wheels cover Type 01 straight, Type 27 depressed-center 4 to 6 in. wheels

October 25, 2010

Saint-Gobain Abrasives Inc. has expanded the Norton RightCut™ line of cutoff wheels for right-angle grinders with new, 0.040-in.-thick wheels. The Norzon Plus RightCut is offered in the Best tier. It is made with the combination of Norton SG® seeded-gel ceramic alumina and Norzon...

Continue Reading


Plasma system comes standard with its own turnkey operating system - TheFabricator.com

Plasma system comes standard with its own turnkey operating system

October 18, 2010

MultiCam Inc. has introduced the V-series plasma machine, which comes standard with its own turnkey operating system. The PC and EZ G-code programming software included with the machine allow operators to design and cut files directly from the machine. The cutting sequence is displayed on the...

Continue Reading

Laser bundles with CNC introduced

October 18, 2010

Fanuc FA America has introduced the Laser C series laser bundles for laser cutting. The laser bundles are complete, fully integrated laser systems that include a laser source, CNC of the laser, amplifiers, and servomotors. Five models are available: C6000i, C5000i, C4000i, C2000i, and C1000i –...

Continue Reading