Assembly and Joining

Assembly is much more than welding. This technology area covers adhesive mixing, metering, and dispensing equipment; hardware-insertion presses; clamps; fixtures, holders, jigs, and vises; part counters; part feeders; and part positioners.

Filter Content
Captive panel screws allow simplified access to components - TheFabricator.com

Captive panel screws allow simplified access to components

August 8, 2013

PennEngineering® offers PEM® types PF50™ and PF60™ self-clinching captive panel screws. They integrate a captive screw in a spring-loaded assembly to help simplify handling and installation. Their permanent mounting in thin metal assemblies helps eliminate loose hardware that...

Continue Reading

Mobile app allows access to fastener catalogs, data sheets

July 23, 2013

PennEngineering® has launched PEMSpec™, a product application designed to enhance fastnener catalog and data sheet searches via mobile device technology. The tool allows design engineers to search the company’s product database and view the pertinent application data. In close collaboration...

Continue Reading

Steel-base leveling mounts bear high static loads - TheFabricator.com

Steel-base leveling mounts bear high static loads

July 23, 2013

J.W. Winco Inc. offers series GN 343.1 tapped-type, steel-base leveling mounts, with or without a plastic or rubber base cup, in metric sizes. The RoHS-compliant leveling mounts can bear high static loads, but for high loads, they should be used in conjunction with screws of high tensile...

Continue Reading

Fontijne Grotnes Group acquires part of Hess Industries

July 16, 2013

The Fontijne Grotnes Group, a maker of manufacturing equipment in the Netherlands, has acquired the intellectual property (IP) of Hess Industries Inc., minus the Wheel IP. The newly acquired product portfolio is positioned as Fontijne Formitt Inc., which includes Formitt Processes and Formitt...

Continue Reading

Integrating stamping, fabricating, and assembly - TheFabricator.com

Integrating stamping, fabricating, and assembly

July 12, 2013

By:

Genesee Stampings and Fabrication has undergone a strategic shift from its core stamping and fabricating business. It has added an assembly operation to the shop floor.

Continue Reading

Spinning flare nuts rotate freely for attachment of mating hardware - TheFabricator.com

Spinning flare nuts rotate freely for attachment of mating hardware

July 11, 2013

New PEM® type SFN™ spinning flare nuts from PennEngineering® are designed to rotate freely when permanently captivated in thin metal sheets for quick attachment to mating hardware and reduced need for loose fasteners such as flange nuts. When they are paired with a self-clinching...

Continue Reading

Atlas: Blind Threaded Rivet Fasteners: A Tutorial

Date: June 16, 2013

Sponsored by PennEngineering

Length: 36:00

This presentation will provide the audience an introduction and a better understanding of how blind threaded fasteners work, when and where they should be used, and what considerations need to be made for optimal use and performance.

Spinning clinch bolts enable captivated screw to spin freely for quick attachment - TheFabricator.com

Spinning clinch bolts enable captivated screw to spin freely for quick attachment

June 6, 2013

PEM® spinning clinch bolts from PennEngineering® install permanently in thin sheet metal, but can spin freely in the sheet. This allows for quick attachment of mating hardware and reduced need for loose fasteners, such as screws and retaining clips or washers, according to the company....

Continue Reading

Designing for adhesive bonding - TheFabricator.com

Designing for adhesive bonding

June 3, 2013

By: ,

While it is sometimes more economically favorable to use adhesives as an alternative to welding, a fabricator must consider many important points before making the changeover.

Continue Reading

Tapping fluid withstands severe operations - TheFabricator.com

Tapping fluid withstands severe operations

May 30, 2013

JTM Products offers TapRite™III tapping fluid for tapping and threading applications in ferrous metals. According to the manufacturer, the fluid provides increased tap life and excellent lubricity in steel alloys and other severe uses, as well as mild steels. The chlorinated oil/wax gel...

Continue Reading

Super Steels super rebound

May 29, 2013

By:

Length: 7:10

Dirk Smith, COO of Milwaukee-based Super Steel, describes how the fabricator endured tough times and emerged from a receivership, went back to its roots of quick-turn contract fabrication, and successfully balanced it with its product line work for the freight rail industry. Read the article.

Elgin Fastener Group names new Cleveland GM - TheFabricator.com

Elgin Fastener Group names new Cleveland GM

May 19, 2013

Elgin Fastener Group (EFG), Batesville, Ind., has announced the appointment of Carl Ondraka as general manager-Cleveland Operations, with responsibility for the company's manufacturing operations at Chandler Products, Quality Bolt & Screw, and Telefast Industries. Ondraka is a graduate of...

Continue Reading

Self-clinching, flush-head studs made for thin stainless steel assemblies

April 29, 2013

PEM® Type FHP™ self-clinching, flush-head studs from PennEngineering® install permanently into thin stainless steel sheets for attachment applications requiring corrosion resistance. They help contribute to thinner, lighter designs for component assemblies in the medical, food service, and...

Continue Reading

Elgin Fastener Group announces acquisition of Vegas Fastener Mfg.

April 4, 2013

Elgin Fastener Group LLC (EFG), Batesville, Ind., has acquired Vegas Fastener Mfg., Las Vegas. Vegas Fastener Mfg. operates a variety of forging presses, computer-controlled turning centers, vertical CNC mills, and CNC bar feeders. The company serves industries including power generation,...

Continue Reading

Self-clinching fasteners enable permanent flush joining of two sheets

February 12, 2013

PEM® SpotFast® self-clinching fasteners from PennEngineering® enable two sheets to be joined permanently in a flush-attachment connection without protrusions on either side. They can be used to attach two metal sheets too thin to weld, fasten sheets of unequal thicknesses, join dissimilar...

Continue Reading