CAD/CAM Software Products

No modern fabrication shop would be complete without computer-aided design (CAD) or computer-aided manufacturing (CAM). This technology area has information on 3-D modeling, nesting, machine control, and process simulation.

Filter Content

Nesting software, controller updated

April 26, 2012

Jetcam Intl. s.a.r.l has announced the simultaneous launch of updates to its two flagship products: Jetcam Expert CAD/CAM and nesting software for sheet metal and composite users, and the Premium version of Jetcam Order Controller (JOC), which provides remote ordering, geometry creation, and...

Continue Reading

Interface allows unfolding, import of CAD files from within nesting software

April 11, 2012

Jetcam Intl. s.a.r.l has introduced new CAD interfaces to AutoPOL for Windows® and AutoPOL G2 3-D CAD and unfolding software packages. The interface allows users to unfold and import CAD files from within Jetcam Expert nesting software, providing a seamless work flow from 3-D CAD to bending,...

Continue Reading

Updated and optimized CAD/CAM, nesting software available in three versions

May 16, 2011

Jetcam has released version 16.20.02 of its Expert CAD/CAM and nesting software. The new version contains an entirely new entry-level product, as well as many new features. Three versions are available: Expert 1, Expert Premium, and Expert Lite. The latter excludes some of the automation of the...

Continue Reading

Nesting interface for CAD/CAM released

May 2, 2011

Striker Systems has announced the release of PARTshare for Siemens' Solid Edge 3-D CAD system. The add-in allows the CAD system to share sheet metal manufacturing data with Striker Systems’ nesting software. An individual part or entire assembly is extracted from the CAD environment. Sheet metal...

Continue Reading

Software facilitates quick flange, blank shape development

February 7, 2011

Forming Technologies Inc. (FTI) has released BlankWorks 4.3. It provides SolidWorks® 2011 users with a fully integrated tool for developing flat patterns from complex 3-D designs. With the software, users can develop flanges and blank shapes for their stampings in less than a minute, the company...

Continue Reading

OEE module for CAD/CAM software examines, reports on equipment productivity and performance - TheFabricator.com

OEE module for CAD/CAM software examines, reports on equipment productivity and performance

October 11, 2010

LVD Strippit has added an overall equipment effectiveness (OEE) module to its CADMAN® family of offline software. The module examines and reports on equipment productivity and performance; provides analysis in simple graphical charts; presents real shop floor information; and monitors...

Continue Reading

Software provides end-to-end management of orders, materials, parts, nests, and assemblies

September 7, 2010

JETCAM Intl. s.a.r.l. will showcase its CrossTrack™ order, material, and assembly management software suite, along with the latest version of the JETCAM Expert CAD/CAM and nesting software, at FABTECH 2010. The software suite provides end-to-end management of orders, materials, parts, nests, and...

Continue Reading

New versions of CAM software for plasma and oxyfuel cutting released

April 27, 2010

Hypertherm's MTC Software has unveiled new versions of its CAM nesting software. NestMaster 2010 and TurboNest 2010 contain functionality designed to contribute to improved ease of use, productivity,...

Continue Reading

Forming software enhanced

December 15, 2009

Simufact Engineering GmbH has finalized version 9.0 of Simufact.forming simulation software. In this release, dual-solver technology has been developed further and offers users the possibility to...

Continue Reading

Laser enhanced with file-transfer capabilities

September 24, 2009

The Consumable Products Group (CPG) division of Mitsubishi Laser brings the flexibility of today's file-transfer capabilities to Mitsubishi Laser. The Calmotion USBCNC disk reader control acts as an...

Continue Reading

Enhanced CAD/CAM nesting software facilitates use of irregular-shaped sheets, plates

July 30, 2009

Striker Systems, a sheet metal manufacturing software developer, has announced the release of STRIKER 2010 Sheet Metal CAD/CAM & Nesting.Driven by customer input, STRIKER 2010 offers many enhancements...

Continue Reading

CAM nesting software enhanced

July 14, 2009

MTC Software, a Hypertherm brand, has launched the latest version of its CAM nesting software, ProNest 2010. The software incorporates improvements to standard features, optional modules, and machine...

Continue Reading

CAD/CAM nesting software enhanced

February 10, 2009

Jetcam Intl. has announced the release of version 16.06.00 of Expert CAD/CAM nesting software for punching and profiling machines.Tool teach facilities have been added, which allow the company's...

Continue Reading

MRP system integrates with provider's CAM, nesting software, or stands alone

December 16, 2008

Jetcam Intl. has introduced a comprehensive MRP system suitable for all types of manufacturing companies, from one-off and small-batch manufacturers to process manufacturers and high-volume/repetitive...

Continue Reading

CAD software enhanced

November 11, 2008

MultiSUITE Software says its structural detailing products have been enhanced to fully utilize the improved drafting environment offered by AutoCAD® 2009. For users without full AutoCAD licenses,...

Continue Reading