Laser Welding Products

Its small spot size and extremely high energy density make laser welding ideal for many welding applications. Learn about the capabilities and limitations of the process in this technology area.

Filter Content
Laser deposition welding system produces pore-free pieces - TheFabricator.com

Laser deposition welding system produces pore-free pieces

February 12, 2013

TRUMPF Inc. offers DepositionLine for laser deposition welding. The laser generates a molten bath on the prepared surface before powdered material is guided through the nozzle to the surface. Once this new layer of material has cooled, the next layer is added. The finished piece is free of...

Continue Reading

Programmable focusing optics feature increased laser work area - TheFabricator.com

Programmable focusing optics feature increased laser work area

January 15, 2013

TRUMPF Inc. has introduced the latest generation of its programmable focusing optics, the PFO 3D, for scanner welding, cutting, and drilling. The maximum work area of the laser has been increased to 20.8 by 30.7 in. in elliptical form with a Z stroke of up to ±18.7 in. The maximum laser...

Continue Reading

Laser robot's integrated beam guidance increases laser capacity

October 30, 2012

Reis Robotics has introduced the new, six-axis laser robot type RV60-26-FT (fiber transfer). It delivers a capacity up to 20 kW, long reach, high handling weights for different welding optics, and powerful beam guidance and optic systems, the company states. In the redesigned hand axis, the laser...

Continue Reading

Laser processing cell can weld, cut, mark almost any part - TheFabricator.com

Laser processing cell can weld, cut, mark almost any part

October 17, 2012

Wayne Trail has introduced the Flex Lase Pro. The high-speed, three-axis, scanner-based laser processing cell is equipped with an IPG 2-kW, single-mode fiber laser and a Cambridge Technologies 3-D, high-speed scanner head. Typical spot size at midrange field of view is about 20 microns. With a...

Continue Reading

Free app simplifies working with technical gases

July 16, 2012

Witt offers iGASES, a new app for iPhone®, iPad®, and Android™ devices that answers questions about technical gases. The new app serves as a reference work for all current technical gases, including important physical-chemical characteristics such as density, steam pressure, ignition range,...

Continue Reading

Large-format laser system features small footprint - TheFabricator.com

Large-format laser system features small footprint

June 28, 2012

Prima Power Laserdyne offers the model 430 precision laser system. It combines high precision and large-format workholding capabilities for industrial laser welding and cutting. The company will show the system at IMTS 2012 with a rack-mounted fiber laser with more than 1,400 W of peak power...

Continue Reading

Aftermarket cavity, beam delivery mirrors available - TheFabricator.com

Aftermarket cavity, beam delivery mirrors available

January 17, 2011

A new series of aftermarket, OEM-quality cavity and beam delivery mirrors for TRUMPF® lasers is offered by Laser Research Optics. The optics feature plane-parallel configurations and include zero-phase, phase-lock, and rear mirrors; output couplers; and phase retarders in 1.5- to 2.7-in....

Continue Reading

Diode laser delivery systems designed for relatively larger numerical apertures, fiber diameters

September 7, 2010

Laser Mechanisms has introduced a line of diode laser beam delivery systems with output wavelengths from about 800 to 980 nm. The units are designed for the relatively larger numerical apertures and fiber diameters of direct-diode systems. Units with SMA-905, QBH, LLK-B (Q5), and other fiber...

Continue Reading

Pulsed Nd:YAG lasers have pulse-to-pulse stability down to ±0.5 percent

July 7, 2010

JK Lasers has released two new pulsed Nd:YAG lasers. Designed for industrial processing, the lasers provide high peak powers and beam quality for welding and fine-cutting applications. The JK80PS...

Continue Reading

Air dryer for laser purge helps protect system's mirrors

December 15, 2009

Parker Hannifin has introduced a line of Balston— air dryers for purging of industrial laser plenums, which protect the laser system's mirrors from dirt and moisture.The dryers use membrane...

Continue Reading

Cleaning kit helps extend laser optics life

November 10, 2009

The LRO CO2 laser optics cleaning kit is available from Laser Research Optics. It includes 24 surgical-grade cotton balls, 24 cotton swabs, 24 surgical-grade finger cots, 24 lens mats, distilled...

Continue Reading

Laser beam analysis system designed for enhanced data baseline accuracy

March 10, 2009

Ophir-Spiricon has introduced the BeamGage™ laser beam analysis system. It is based on UltraCal™, the company's patented baseline correction algorithm that helped establish the ISO 11146-3...

Continue Reading

Weld tracking laser camera developed for same material thickness butt welding

February 10, 2009

The Quanta from Servo-Robot is a high-resolution laser camera for butt welding applications, including same material thickness. It is designed for welding processes such as laser, GTAW, and plasma...

Continue Reading

Laser cutting system includes a CV5000 resonator

February 10, 2009

Prima North America Inc. offers the Optimo five-axis, 3-D laser cutting system. It includes a CV5000 laser resonator, which the company says helps the system achieve high cutting speeds, process thick...

Continue Reading

Laser welding system introduced

August 12, 2008

LaserStar Technologies Corp. has introduced its iWeld® advanced laser system. The system has a footprint 19 in. wide by 24.5 in. long and fits into any work environment, the company reports. It...

Continue Reading