Waterjet Cutting Products

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content
Abrasivejet machines handle low- to high-volume production - TheFabricator.com

Abrasivejet machines handle low- to high-volume production

August 15, 2012

OMAX® Corp. will demonstrate abrasive waterjet machining technology at FABTECH Intl. Cutting materials from composites to rubber to titanium, the abrasivejet machines handle low- and high-volume production for shops of all sizes in all industry segments. The machines, available in a variety...

Continue Reading

Modular waterjet pump designed for tight spaces - TheFabricator.com

Modular waterjet pump designed for tight spaces

August 8, 2012

Waterjet manufacturer Jet Edge Inc. has introduced the iP36-50 modular waterjet intensifier pump. The portable, 36-KSI, 50-HP pump has a modular design, allowing it to move into tight spaces. The pump produces up to 1.8 GPM of ultrahigh-pressure water for precision cutting, cleaning, and...

Continue Reading

Abrasive waterjet cutting machines featured at tradeshow - TheFabricator.com

Abrasive waterjet cutting machines featured at tradeshow

June 12, 2012

OMAX™ Corp. will present live demonstrations of its abrasive waterjet cutting machines and accessories at IMTS 2012. Operating at the show will be a 6.7- by 20-ft., production-oriented OMAX 80X-1 Dual Bridge JetMachining Center™; a job shop-sized, 5- by 10-ft. MAXIEM® model...

Continue Reading

Waterjet pump uses less electricity - TheFabricator.com

Waterjet pump uses less electricity

May 30, 2012

Jet Edge Inc. has introduced the Eco-Jet waterjet pump. The 55-KSI, 30-HP unit features a direct-drive pump design that consumes up to 40 percent less electricity than a 50-HP pump while producing the same output, the manufacturer reports. The pump produces up to 1 GPM of ultrahigh-pressure...

Continue Reading

Waterjet cutting system features small footprint - TheFabricator.com

Waterjet cutting system features small footprint

May 29, 2012

TECHNI Waterjet™ has introduced the new Intec-G2 Value series of small-footprint waterjet cutting systems. The system, which features a large monitor screen, is available with an optional remote control pendant. The Skip and Float™ option helps ensure a constant standoff height over...

Continue Reading

Water-based coolant prevents odors, rust

May 15, 2012

Pico Chemical Corp. has introduced Pico Quench Guard G for use in plasma, waterjet, and other cutting table systems. The water-based solution is designed to cool and quench cutting surfaces and protect ferrous and nonferrous machinery components and processed parts from rust and corrosion for...

Continue Reading

Entry-level waterjet designed for production environments

April 10, 2012

Mitsubishi's MW3 entry-level waterjet machine for production environments features solid base construction and a cantilever head design. The 720 CNC delivers advanced programming capabilities. The unit is controlled on a 15-in. waterproof screen. Menu and help functions guide the operator through...

Continue Reading

Waterjet cutting systems available with three to six axes - TheFabricator.com

Waterjet cutting systems available with three to six axes

March 13, 2012

Knuth Machine Tools has introduced a new line of waterjet cutting systems with three, four, five, or six axes. They are available in flying-bridge and gantry styles in 4- by 4-ft., 5- by 10-ft., 6- by 12-ft., and 10- by 20-ft. sizes. Optional features include multiple cutting heads, sludge...

Continue Reading

Modular waterjet machine introduced - TheFabricator.com

Modular waterjet machine introduced

January 23, 2012

Flow Intl. has introduced the Mach 4c waterjet machine for the production environment. The system offers a modular design expandable up to 48 ft., allowing users to increase the size of the cutting area as their business grows. It provides fast, accurate machine motion with zero backlash, the...

Continue Reading

Abrasive waterjet machine cuts complex parts from most materials with setup change - TheFabricator.com

Abrasive waterjet machine cuts complex parts from most materials without setup change

January 23, 2012

OMAX® Corp. offers the MAXIEM® 1530 JetCutting center. It has a table size of 12 ft. 7 in. by 5 ft. 9 in. and an XY cutting travel of 10 ft. 2 in. by 5 ft. 2 in. The abrasive waterjet machine can cut complex parts out of most materials without changing equipment setup. It comes standard...

Continue Reading

Waterjet cutting machine has extended tank, three independently controlled heads - TheFabricator.com

Waterjet cutting machine has extended tank, three independently controlled heads

November 27, 2011

WARDJet's ZX-2546 waterjet cutting machine has an extended tank and cross-beam design to enable triple-head cutting while allowing for single-head cutting of a full 8- by 12-ft. sheet. Each of the three heads is controlled independently by its own AC servomotor. This allows for independent...

Continue Reading

Waterjet cutting system features work surfaces up to 60 x 120 in. - TheFabricator.com

Waterjet cutting system features work surfaces up to 60 x 120 in.

November 21, 2011

MultiCam® Inc. has added the Value-Series waterjet to its product line. This pure water or abrasive cutting system features work surfaces up to 60 by 120 in. Fully enclosed bellows protect the Y and Z axes from abrasive garnet buildup. The X axis features dual drives and completely covered,...

Continue Reading

Models added to abrasive waterjet line

November 7, 2011

MAXIEM Waterjets, a division of OMAX® Corp., has added 16 new abrasive waterjet machines to its line of JetCutting centers. The 2000, 3000, and 4000 series employ the same 50,000-PSI, direct-drive pump technology as OMAX's JetMachining® centers. They also feature Intelli-MAX® software and...

Continue Reading

Metal cutting controller has expanded functionality

September 14, 2011

Hypertherm has announced plans to produce the new MicroEDGE Pro CNC with the latest Phoenix® version 9 software. The CNC delivers customizable control for a variety of cutting applications. The software expands the control's functionality for multiple plasma bevel designs, waterjet, and cutting...

Continue Reading

Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water - TheFabricator.com

Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water

May 23, 2011

Jet Edge Inc. has introduced the iP60-150, a 150-HP, 60,000-PSI waterjet intensifier pump. It can produce up to 3 GPM of ultrahigh-pressure water for precision waterjet cutting and UHP surface preparation applications. It supports orifices up to 0.025 in. and features dual intensifier systems....

Continue Reading