Stamping News

Whether you're using a high-speed stamping press to make simple parts at breakneck speeds or doing something really tricky, like deep drawing a material that puts up a lot of resistance, the information in this technology area is sure to help. The articles, case studies, and press releases cover stamping presses, lubricants, and materials.

Filter Content

Sodick names national service manager - TheFabricator

Sodick names national service manager

July 19, 2010

Sodick Inc., Schaumburg, Ill., has appointed Ramiro Perucho as national service manager. He has worked in the machine tool industry for more than 12 years. Perucho started at the company as a service engineer and later was promoted to assistant service manager and then Midwest service manager....

Continue Reading

Coe delivers fully integrated blanking line to Toyotomi America

June 7, 2010

Coe Press Equipment, Sterling Heights, Mich., has shipped and commissioned a new blanking line with AIDA-America, Dayton, Ohio, to automotive stamping supplier Toyotomi America, Springfield, Ky. Standard Coe equipment was integrated with an AIDA 400-ton blanker to provide a turnkey system...

Continue Reading

Ogihara America names president

June 7, 2010

Ogihara America Corp., a Thai Summit Group company in Howell, Mich., has named Chumpol Rangson as president. He replaces Hiroaki Sugiura, who has served as company president since 2008. Rangson comes to the company from Thai Summit Autoparts Industry, where he served as director of overseas...

Continue Reading


Big Kaiser hosts grand opening - TheFabricator

Big Kaiser hosts grand opening

June 1, 2010

Big Kaiser Precision Tooling welcomed customers and partners to the grand opening of its new headquarters April 29-30. The two-day event showcased the new, 33,000-sq.-ft. facility located in Hoffman Estates, Ill. Highlights included a 5,000-sq.-ft. product showroom, a training and presentation...

Continue Reading

Schuler appoints distributor for New England, East Coast

May 24, 2010

Schuler Inc., Canton, Mich., has named Northeast Press Sales Co., Cicero, N.Y., as distributor for 10 states in New England and the East Coast. Schuler supplies metal forming and stamping equipment for the automotive, appliance, packaging, defense, and general stamping markets. Lee Walz, owner of...

Continue Reading

AIDA-America expands distribution network for Tennessee

May 24, 2010

AIDA-America, Dayton, Ohio, has named Productive Stamping Solutions Inc. as the exclusive distributor for Tennessee. AIDA designs, manufactures, and services metal stamping presses and metal forming automation...

Continue Reading

Wilson Tool opens office in Mexico

May 17, 2010

Wilson Tool Intl., White Bear Lake, Minn., has opened a new office in Monterrey, Nuevo León, Mexico. The new office provides tooling systems, sales, and support. Jay Dienst, Wilson Tool’s vice president of sales for North and Latin America, oversees the operations. Wilson Tool Intl. is a...

Continue Reading

Stamtec offers free in-house service training

May 10, 2010

On Tuesday, May 25, from 9:00 a.m. to 4:00 p.m. at its facility in Manchester, Tenn., Stamtec will host a free service training event for owners of its presses. Attendees will receive hands-on training in proper setup and operation, fundamental techniques used in an effective preventive maintenance...

Continue Reading

BCN Technical appoints New England distributor

April 6, 2010

BCN (Bliss Clearing Niagara) Technical Services, Hastings, Mich., has announced its appointment of Northeast Press Sales Co. as distributor for 10 states in New England and the East Coast. Lee Walz, owner of Northeast Press Sales Co., will represent BCN Technical Services and its products in...

Continue Reading

Dayton Progress named to Quality Leadership 100 list

March 15, 2010

Dayton Progress has been named to the Quality Leadership 100 list of companies for 2010 by Quality magazine. The company placed 89th out of more than 800 manufacturers across most industries participating in the ranking. Companies were surveyed on criteria such as scrap and rework as a...

Continue Reading

Simufact Eng., Presstec Pressentechnologie form partnership

March 5, 2010

Simufact Eng. GmbH, Hamburg, Germany, a provider of software and services for bulk metal forming, and Presstec Pressentechnologie GmbH, a provider of hydraulic presses and mechanical high-speed blanking and stamping presses in Kehl, Germany, have formed a technological partnership. During the...

Continue Reading

Feralloy Corp. announces personnel changes

March 5, 2010

Carlos Rodrguez Borjas has been promoted to executive vice president and COO of Feralloy Corp., Chicago. For the past 11 years, he has served as general director of Acero Prime, a joint venture of Feralloy. Arturo Marroqun, who has nine years of experience at Acero Prime as operations manager, has...

Continue Reading

Stamtec unveils expanded service network for North America

March 1, 2010

Manchester, Tenn.-based Stamtec, a manufacturer of stamping presses, has certified several long-standing dealer partners as authorized service centers to better serve customers across North America. The authorized service centers are: Wenco Machinery – Ringwood, New JerseyAllied Innovations...

Continue Reading

Stamtec announces promotion

March 1, 2010

Manchester, Tenn.-based Stamtec, a manufacturer of stamping presses, has promoted Patrick Thomas to service manager. Thomas served as a senior service technician and assistant service manger during the past 14 years. Former Service Manger Frank Sunquist has...

Continue Reading

J&S Machine selected as U.S. distributor for Simasv's horizontal press product line

February 15, 2010

J&S Machine Inc., Ellsworth, Wis., has entered into an agreement with Simasv srl of Thiene Italy to distribute the manufacturer's horizontal press and beveller lines in the U.S. Simasv's presses can range in size from 22 tons to 100 tons. Tooling options available from Simasv and J&S Machine allow...

Continue Reading