- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 348
Hydraulic tube scarfing mandrels made for small-diameter tube
- Oct 20, 2014
- Tube and Pipe Fabrication
- Product Release
Saar-Hartmetall USA has introduced three new hydraulic scarfing systems — RI-HN 2, RI-HN 1, and RI-HN 017 — for ID scarfing of ERW heavy-gauge tube and pipe. The hydraulically activated scarfing mandrels are equipped with double-wheel pressure carriage systems. They handle tube IDs...
- From The Fabricator
Heavy-duty cutoff saw system automates push feed
- Oct 17, 2014
- Sawing
- Product Release
TigerStop has introduced TigerSaw Ferrous, a fully automated, heavy-duty, precision ferrous metal cutoff saw and push feed. The column saw has mitering capabilities from 60 degrees left to 45 degrees right. The system is designed to cut tube, pipe, and barstock up to 42 ft. long. Features...
- From The Fabricator
Inverter designed for microjoining applications
- Oct 17, 2014
- Assembly and Joining
- Product Release
Miyachi America offers the IPB-5000A inverter, a resistance welding power supply for microjoining applications. The power supply features 5-kHz fast feedback and operates in constant-current, voltage, or power feedback modes. It also can weld in combo mode. Maximum output is 6,000 amps. The...
- From The Fabricator
Software’s cutting model increases waterjet machine predictability
- Oct 16, 2014
- Waterjet Cutting
- Product Release
OMAX® Corp. has released Intelli-MAX® 21 software for its JetMachining® centers. Featuring a fourth-generation cutting model, the new version optimizes tool paths automatically and provides predictability of cutting speeds, taper, and jet lag. The cutting model within the software builds upon...
- From The Fabricator
Combination punch/right-angle shear made for short component runs
- Oct 16, 2014
- Punching and Other Holemaking
- Product Release
Prima Power has introduced the SGe5 Combi punch and right-angle shear. Using servo electric motors for low power consumption and low noise levels, they operate without human intervention from the blank to automated sorting. Suitable for short runs of components, the machine enables the mixing of...
- From The Fabricator
Communication protocol added to encoders
- Oct 16, 2014
- Shop Management
- Product Release
Heidenhain offers the use of Siemens Drive-CLiQ communication protocol in its ECN/EQN 1300 optical absolute encoders. The Ethernet-based protocol interfaces with Sinamics control systems. It has a speed of 100 Mbit/sec. and a cycle time of 31.25 μs. Motion control system components with the...
- From The Fabricator
Caster made for heavy-duty use
- Oct 16, 2014
- Shop Management
- Product Release
Caster Concepts has introduced the new 87 series caster. Designed for heavy-duty industrial applications, the maintenance-free caster carries a load evenly over a radially loaded precision ball bearing. A forged steel top-plate stabilizes the bearing, and a precision-machined yoke base helps...
- From The Fabricator
Hydraulic drive technology allows energy savings in tube processing
- Oct 15, 2014
- Bending and Forming
- Product Release
A new development from transfluid has improved the efficiency of hydraulic drives for tube processing. According to the company, the technology allows energy savings up to 70 percent. The manufacturer implements the controls on the hydraulic pumps using servomotors. The speed and thus the volume...
- From The Welder
Electrode welds plates with surface contaminants
- Oct 15, 2014
- Consumables
- Product Release
Select-Arc Inc. has introduced Select 70CRP, a flux-cored carbon steel electrode designed for the welding of structural plate with surface contaminants, such as rust and weldable primers. It welds on these surfaces with minimal porosity and blowholes, delivering smooth arc characteristics, minimal...
- From The Fabricator
Brochure highlights mist collector line
- Oct 15, 2014
- Shop Management
- Product Release
Micro Air Clean Air Systems offers a brochure that details its MistMax™ series high-efficiency mist collector line for controlling oil and coolant mist in metalworking applications. The brochure contains engineering data and performance charts on tested filter efficiency and filter life...
- From The Fabricator
Linear stage offers 0.5-micron resolution
- Oct 15, 2014
- Shop Management
- Product Release
PI has introduced the M-417 linear stage, which provides 19.69-in. travel and 0.5-micron resolution. This motorized precision positioner can be computer-controlled for automation and precision assembly applications. The linear translation stage can handle high duty cycles and 3.94-IPS velocity....
- From The Fabricator
Vertical machining center provides high rigidity, heavy cutting ability
- Oct 14, 2014
- Machining
- Product Release
Okuma’s new Millac 852V II vertical machining center offers high rigidity, heavy cutting ability, and high operability. The strong base column construction has ribs that counter chatter and twisting during heavy-duty cutting. Traditional box ways are used for all axes to provide high accuracy and...
- From The Fabricator
Multitool qualifier connects up to 16 tools wirelessly
- Oct 14, 2014
- Shop Management
- Product Release
Panasonic has introduced the EYFR03 multitool qualifier with 16-tool connectivity. The technology has integrated and remote I/O versions, features a color LCD screen and USB plug-and-play firmware updates, offers onboard data collection for up to 10,000 rundowns, and can be configured to enable or...
- From The Fabricator
Changeover cart designed for press brake tooling
- Oct 14, 2014
- Shop Management
- Product Release
The Versatility® press brake changeover cart handles 54 linear ft. of punches and dies. It includes a 3-in.-deep, 75-lb.-capacity drawer for measuring instruments and changeover tools. The side-handled cart provides a stable platform and protects tooling from damage while transporting and...
- From The Fabricator
Custom-designed tooling offered for industrial manipulators
- Oct 14, 2014
- Materials Handling
- Product Release
TDA Buddy offers custom-designed tooling for its line of custom industrial manipulators. The custom end effectors include grippers, vacuum pickup devices, and magnets. End effector grippers are suitable for handling products from window frames and structural components to fragile parts to...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
AI, machine learning, and the future of metal fabrication
Employee ownership: The best way to ensure engagement
Steel industry reacts to Nucor’s new weekly published HRC price
Dynamic Metal blossoms with each passing year
Metal fabrication management: A guide for new supervisors
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1