Bending News

The bending technology area includes all manner of machines and processes for bending sheet metal, including press brakes, folders, panel benders, corner formers, ironworkers, notchers, orbital formers, and roll benders. It also has information on accessories such as gauging and backgauging systems.

Filter Content

Wilson Tool website launches in multiple languages

June 26, 2012

Wilson Tool International, White Bear Lake, Minn., has launched a redesigned website at www.wilsontool.com. The new site includes more product information, simplified navigation, and multiple languages. The simultaneous launch of the website in five languages — American and British English,...

Continue Reading

Albina Pipe Bending launches new website

June 7, 2012

Albina Pipe Bending, a provider of steel bending and fabrication located outside Portland, Ore., has established a website at www.albinapipebending.com that provides fabricators, architects, and engineers with interactive technical tools, online calculators, and reference material to assist with...

Continue Reading

Champion Tool Storage installs Prima Power press brake

May 16, 2012

Champion Tool Storage, Hood River, Ore., has installed a Prima Power Ep1030 servo-electric press brake, adding capacity to its forming department. The company manufactures toolboxes for industrial, professional, and military users....

Continue Reading

LVD Co. marks 60 years in business

May 14, 2012

LVD Co. nv, Gullegem, Belgium, marks its 60th anniversary in 2012 as a designer and manufacturer of equipment for sheet metal fabrication. The company began producing hydraulic presses in 1952 and today manufactures punching, laser cutting, and forming/bending machinery. In addition to its...

Continue Reading

Pines Technology receives award from Boeing - TheFabricator.com

Pines Technology receives award from Boeing

May 8, 2012

Pines Technology, Westlake, Ohio, has been honored by Boeing Philadelphia for the performance of its CNC tube benders for the V22 Osprey program. The benders are used to make replacement fuel and hydraulic lines for the Osprey. The benders are built in two configurations — one for mobile...

Continue Reading

Lomar Machine & Tool recognized with supplier award

May 3, 2012

Lomar Machine & Tool Co., Horton, Mich., has received the Premier Supplier Award in the direct materials category from Eaton Corp. As a direct material supplier, Lomar provides goods used directly in the making of Eaton products. A total of 33 companies were recognized with the award in the...

Continue Reading

COMEQ names vice president of sales - TheFabricator.com

COMEQ names vice president of sales

May 2, 2012

COMEQ Inc., White Marsh, Md., the exclusive distributor for Geka, Safan, Primeline, Americor, and Parmigiani fabricating and sheet metal machinery, has announced the appointment of Eric Lenhart as vice president of sales. In this position, he works with staff to foster closer relationships with...

Continue Reading

Voortman open house scheduled for June

April 23, 2012

On June 28-29 Voortman will hold an open house at its Rijssen, Netherlands, plant to demonstrate its automated steel processing machines. During the Product Introduction Days 2012 event, company representatives will share in-depth information with customers, distributers, and industry publications...

Continue Reading

Ermak installs press brake at Ryerson - TheFabricator.com

Ermak installs press brake at Ryerson

April 19, 2012

Ermak USA has installed an Ermak tandem press brake at Joseph T. Ryerson & Son Inc. in Mobile, Ala. The 48-ft. by 2,000-ton Speedbend press brake can form plates up to 48 ft. and up to 0.75 in. thick. The machine is equipped with the company's Delem 66 controller for offline and online...

Continue Reading

Siemens installs plate bending roll from Cole-Tuve

April 12, 2012

Siemens Industry Inc. has installed a Virli model 4RS-10-620 four-roll hydraulic plate bending roll with a capacity of 10 ft. by 2.75 in. Manufactured by Sahinler Metal Makina and distributed by Cole-Tuve Inc., White Marsh, Md., the large machine was partially disassembled after factory assembly...

Continue Reading

Ermaksan introduces fiber laser, hybrid press brake at open house - TheFabricator.com

Ermaksan introduces fiber laser, hybrid press brake at open house

April 12, 2012

Ermaksan held an open house Feb. 29-March 1 at its new plant in Bursa, Turkey, to introduce the Fibermak fiber laser cutting machine and the Evo II hybrid press brake. Two hundred guests from 90 companies in 40 countries attended the event. According to comments at the event from Ahmet Ozkayan,...

Continue Reading

LVD Strippit appoints sales engineer - TheFabricator.com

LVD Strippit appoints sales engineer

April 12, 2012

LVD Strippit, Akron, N.Y., has named Dean Arneson to the position of sales engineer. Based in Andover, Minn., he is responsible for the sale of the company's sheet metal and plate working machines and software in Minnesota, North Dakota, South Dakota, and northern Iowa. Arneson worked...

Continue Reading

Bystronic to open new headquarters in Illinois - TheFabricator.com

Bystronic to open new headquarters in Illinois

April 12, 2012

Bystronic Inc. will host the grand opening of its new North American headquarters May 3-4, 2012. The 48,300-sq.-ft. building, located in Elgin, Ill., has a 10,000-sq.-ft. office, 14,000-sq.-ft. showroom, and 24,300-sq.-ft. spare parts and logistics area. In addition to being the company's...

Continue Reading

AddisonMckee to supply muffler assembly system for Chrysler C platform vehicle - TheFabricator.com

AddisonMckee to supply muffler assembly system for Chrysler C platform vehicle

March 13, 2012

Tube bending and end forming equipment-maker AddisonMckee of Lebanon, Ohio, has been commissioned to manufacture entirely new and rebuilt Eagle equipment for a Michigan exhaust manufacturer to produce the muffler assembly for Chrysler's new C platform vehicle in the U.S. The equipment features...

Continue Reading

BLM Group USA appoints southwest sales manager - TheFabricator.com

BLM Group USA appoints southwest sales manager

March 7, 2012

BLM Group USA, a Wixom, Mich.-based manufacturer of tube processing equipment, has announced the appointment of Todd O’Brien as its new southwest region sales manager. In this position, O’Brien is responsible for customer account management and sales of the company's equipment. The...

Continue Reading