CAD/CAM Software Products

No modern fabrication shop would be complete without computer-aided design (CAD) or computer-aided manufacturing (CAM). This technology area has information on 3-D modeling, nesting, machine control, and process simulation.

Filter Content
OEE module for CAD/CAM software examines, reports on equipment productivity and performance -

OEE module for CAD/CAM software examines, reports on equipment productivity and performance

October 11, 2010

LVD Strippit has added an overall equipment effectiveness (OEE) module to its CADMAN® family of offline software. The module examines and reports on equipment productivity and performance; provides analysis in simple graphical charts; presents real shop floor information; and monitors...

Continue Reading

Software provides end-to-end management of orders, materials, parts, nests, and assemblies

September 7, 2010

JETCAM Intl. s.a.r.l. will showcase its CrossTrack™ order, material, and assembly management software suite, along with the latest version of the JETCAM Expert CAD/CAM and nesting software, at FABTECH 2010. The software suite provides end-to-end management of orders, materials, parts, nests, and...

Continue Reading

New versions of CAM software for plasma and oxyfuel cutting released

April 27, 2010

Hypertherm's MTC Software has unveiled new versions of its CAM nesting software. NestMaster 2010 and TurboNest 2010 contain functionality designed to contribute to improved ease of use, productivity,...

Continue Reading

Forming software enhanced

December 15, 2009

Simufact Engineering GmbH has finalized version 9.0 of Simufact.forming simulation software. In this release, dual-solver technology has been developed further and offers users the possibility to...

Continue Reading

Laser enhanced with file-transfer capabilities

September 24, 2009

The Consumable Products Group (CPG) division of Mitsubishi Laser brings the flexibility of today's file-transfer capabilities to Mitsubishi Laser. The Calmotion USBCNC disk reader control acts as an...

Continue Reading

Enhanced CAD/CAM nesting software facilitates use of irregular-shaped sheets, plates

July 30, 2009

Striker Systems, a sheet metal manufacturing software developer, has announced the release of STRIKER 2010 Sheet Metal CAD/CAM & Nesting.Driven by customer input, STRIKER 2010 offers many enhancements...

Continue Reading

CAM nesting software enhanced

July 14, 2009

MTC Software, a Hypertherm brand, has launched the latest version of its CAM nesting software, ProNest 2010. The software incorporates improvements to standard features, optional modules, and machine...

Continue Reading

CAD/CAM nesting software enhanced

February 10, 2009

Jetcam Intl. has announced the release of version 16.06.00 of Expert CAD/CAM nesting software for punching and profiling machines.Tool teach facilities have been added, which allow the company's...

Continue Reading

MRP system integrates with provider's CAM, nesting software, or stands alone

December 16, 2008

Jetcam Intl. has introduced a comprehensive MRP system suitable for all types of manufacturing companies, from one-off and small-batch manufacturers to process manufacturers and high-volume/repetitive...

Continue Reading

CAD software enhanced

November 11, 2008

MultiSUITE Software says its structural detailing products have been enhanced to fully utilize the improved drafting environment offered by AutoCAD® 2009. For users without full AutoCAD licenses,...

Continue Reading

Nesting software enhanced

September 16, 2008

MTC Software has updated and enhanced its drill, tap, and spindle operation support for ProNest, the company's nesting software for sheet and plate processing.The specialized plug-in was developed...

Continue Reading

CAD/CAM, nesting software introduced

July 15, 2008

Striker Systems has announced the availability of FAB Professional 2009, the AutoCAD®-based version of the company's sheet metal CAD/CAM and nesting software.The software provides direct...

Continue Reading

Nesting software supports common lasers, waterjets used in Asia

April 15, 2008

MTC Software Inc. says its ProNest® nesting software now offers support for laser and waterjet cutting brands commonly used in Asian markets, such as Hankwang, Daewoo, Nisshinbo, and TOPS. The...

Continue Reading

Press brake software facilitates part design, importation

June 12, 2007

SigmaTEK Systems LLC has added press brake software to its NC programming software lineup.With the software, a user can design a part from scratch or import it from any CAD software. The process then...

Continue Reading

Nesting software released

January 9, 2007

MTC Software Inc. has released ProNest 8, the latest version of its nesting software for sheet and plate process optimization.The new version offers improved standard features and advancements in CAD...

Continue Reading