Materials Handling Products

The material handling technology area encompasses systems and equipment for handling coil, sheet, plate, profiles, tube and pipe, raw materials, and scrap. It also covers peripheral accessories such as C-hooks, clamps, die storage systems, hoists, lifters, and sheet stackers and destackers.

Filter Content
Separation conveyor produces high magnetic fields - TheFabricator.com

Separation conveyor produces high magnetic fields

May 29, 2013

Bunting® Magnetics Co. has introduced a new line of high-intensity separation conveyors. They provide high magnetic fields to remove lightly magnetic tramp metal fines. High-intensity magnetic fields also separate work-hardened 300 series stainless steel from the product stream, increasing...

Continue Reading

Lifting magnets move steel without slings, hooks

May 19, 2013

Eriez® offers lifting magnets in permanent and electro designs for a variety of applications. They lift and move steel without direct attachment by slings, hooks, or cables. SafeHold® permanent lift magnets are suitable for carrying semifinished products such as machined parts, castings, press...

Continue Reading

Robotic pallet wrapper accommodates loads to 93 in. high

May 19, 2013

ITW Muller has introduced its GW-4100 robotic pallet wrapper. Reaching speeds of 37 loads/hr., its standard telescoping mast accommodates load heights up to 93 in. The built-in film cutter cuts film at completion of wrap cycles and helps minimize the risk of operator injury. Designed for use with...

Continue Reading

Vacuum cups withstand hot forming temps - TheFabricator.com

Vacuum cups withstand hot forming temps

May 9, 2013

Bilsing Automation North America has introduced the WF2 series black vacuum cups, designed to withstand the high-temperature environment of hot forming. The new silicone-free cups, made of FPM, can withstand temperatures up to 482 degrees F with a medium-hard material ranking of 70 Shore A. The...

Continue Reading

Battery-powered scissor lift places loads at convenient height - TheFabricator.com

Battery-powered scissor lift places loads at convenient height

April 9, 2013

XBP series portable electric scissor lifts are available from Presto Lifts Inc. The battery-powered tables lift and lower at the touch of a button, allowing the operator to transport loads and lift them to a convenient height, regardless of the application. According to the company, they roll...

Continue Reading

Floor-level lifts can be loaded, unloaded by hand pallet jack - TheFabricator.com

Floor-level lifts can be loaded, unloaded by hand pallet jack

March 12, 2013

Presto Lifts Inc. offers the XZ series hydraulic floor-level lifts for loads up to 6,000 lbs. Suitable for assembly, maintenance, and palletizing applications, they can be loaded and unloaded with an ordinary hand pallet jack. The lift platform lowers to floor level, leaving the pan-style...

Continue Reading

Air skate systems move loads up to 540,000 lbs.

March 4, 2013

Air skates from Lifting Gear Hire Corp. move heavy loads on a thin cushion of air. Available in sets of four or six, the air skates lower the coefficient of friction near 1 percent, allowing one person to move 5,000 lbs. on a smooth and flat floor. The air skate system uses a manifold that...

Continue Reading

Electric forklift handles heavy loads without heavy emissions - TheFabricator.com

Electric forklift handles heavy loads without heavy emissions

February 21, 2013

Nissan Forklift Corp. offers electric-powered material handling equipment with robust, brushless, AC motors. The electric rider lift trucks feature a full-suspension seat; four-mode regenerative braking; customizable performance settings; quiet, on-demand steering; automatic power-off; onboard...

Continue Reading

Chip conveyor belt hinge designed as one continuous piece

February 20, 2013

Hennig has introduced a 2.5-in.-pitch steel belt chip conveyor for moving chips, parts, and scrap pieces. The company can make conveyors in widths from 4 to 80 in. The belt hinge is designed as one continuous piece. Impact plates are optional. Incline covers can be included when large amounts of...

Continue Reading

Manual palletizer keeps load at ergonomic position - TheFabricator.com

Manual palletizer keeps load at ergonomic position

February 5, 2013

The new P3™ All-Around level loader from Presto Lifts helps eliminate bending, lifting, reaching, and stretching in pallet-loading applications. The pneumatic air bag automatically lowers or raises a pallet as boxes are added or removed to remain at a convenient height. The turntable ring...

Continue Reading

Lifting magnets handle flat, round materials - TheFabricator.com

Lifting magnets handle flat, round materials

January 24, 2013

SafeHold® MPL series permanent lifting magnets from Eriez® lift, move, and position materials without the need for magnet release and without slings, hooks, or cables. The magnets are suitable for loading and unloading steel sheets from burning tables or anywhere that operator access is...

Continue Reading

Wheels roll smoothly with loads up to 7,200 lbs. - TheFabricator.com

Wheels roll smoothly with loads up to 7,200 lbs.

January 22, 2013

New Ultralast™ wheels from Hamilton Caster are built to handle heavy loads with continuous, high-speed use. The industrial wheels are made from new polyurethane materials that minimize heat buildup, enabling them to roll smoothly and easily with loads up to 7,200 lbs. The wheels are...

Continue Reading

Leveling technology available for light-gauge materials

January 16, 2013

Herr-Voss Stamco has expanded its ELT™ Enhanced Leveling Technology delivery system capability to include lighter gauges for the stay-flat material requirements of the laser cutting and fabrication markets. The light-gauge delivery system accommodates materials from 0.250 to 0.060 in. thick. The...

Continue Reading

Vacuum lifter-tilter loads strip metal coil onto mandrel - TheFabricator.com

Vacuum lifter-tilter loads strip metal coil onto mandrel

January 15, 2013

Anver Corp. has introduced the AT series vacuum lifter-tilter. The compact unit lets an operator pick up a thin-strip metal coil from the top surface, keeping the center hole unobstructed, and then manipulate and load it onto a mandrel. Featuring fully adjustable and lockable power tilting...

Continue Reading

Conveyor drive features compact design

January 9, 2013

The new 2200 series Mid Drive belt conveyor platform from Dorner Mfg. frees up the motor and mounts from both ends of the conveyor, creating additional available space for operator and machine interfaces. The compact, three-roller design is 40 percent smaller than tensioned-center drives, opening...

Continue Reading