Sawing Products

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content
Wet abrasive saw engineered for quality testing of foundry castings - TheFabricator.com

Wet abrasive saw engineered for quality testing of foundry castings

June 28, 2012

The Kalamazoo Industries model K36 wet abrasive saw is designed for foundries that need to cut very large heat-treated castings for porosity inspection. The saw features a 50-HP motor driving a 36-in. abrasive wheel with an abrasive composition engineered for the specific alloy being cut....

Continue Reading

Band saw designed for high-speed aluminum cutting - TheFabricator.com

Band saw designed for high-speed aluminum cutting

June 27, 2012

Behringer has introduced the new HBM800ALU band saw for high-speed cutting of aluminum and other nonferrous materials. The fully automatic saw uses a 1.25-in. saw blade, either bimetal or carbide-tipped. After stock is loaded, the machine manages all aspects of the process and displays real-time...

Continue Reading

Pneumatic circular saw features ultrathin blade for dry cutting - TheFabricator.com

Pneumatic circular saw features ultrathin blade for dry cutting

May 31, 2012

CS Unitec has introduced a 9-in. pneumatic circular saw for dry cutting steel plate up to 0.375 in. thick, as well as nonferrous metal and grating. The 19-lb. model 5 1115 0020 metal cutting saw is suitable for such industries as foundries, petrochemical, nuclear, marine, demolition, and...

Continue Reading

Saw designed for minimum backlash

May 31, 2012

The AMSAW® line from Advanced Machine & Eng. Co. uses carbide or cermet blades to cut ferrous and nonferrous material, bars, billets, rails, profiles, pipes, and tubes.The compact, rigid design includes hardened spindle gears ground for minimum backlash. The saw blade guide and dampening...

Continue Reading

Billet sawing systems feature carbide blades - TheFabricator.com

Billet sawing systems feature carbide blades

March 29, 2012

AMSAW® high-speed production saw machines use carbide blades to cut ferrous and nonferrous pipes, tubes, bars, billets, rails, and profiles. The machine features a compact, rigid design; hardened spindle gears ground for minimum backlash; a saw blade guide and dampening device;...

Continue Reading

Manual band saw made for light-duty cutting - TheFabricator.com

Manual band saw made for light-duty cutting

March 22, 2012

The Kalamazoo Machine Tool model H235 manual band saw is designed for light-duty cutting of tubes, pipes, light structural shapes, and small solids up to 8 in. at 90 degrees. The saw has a variable-speed blade from 65 to 320 FPM and can miter up to 60 degrees to the right while maintaining the...

Continue Reading

Double-column mitering band saw designed for structural, solid, and difficult materials - TheFabricator.com

Double-column mitering band saw designed for structural, solid, and difficult materials

January 26, 2012

Kalamazoo Machine Tool's model H6A-NC double-column mitering band saw is a fully automatic machine designed for the production of structural, solid, and difficult materials. The machine is fully programmable to enable serial cutting of various lengths, sizes, blade speeds, and quantities and to...

Continue Reading

Hole saws, reciprocating saw blades introduced - TheFabricator.com

Hole saws, reciprocating saw blades introduced

January 9, 2012

The M.K. Morse Co. has introduced the Morse Diamond Grit™ line of hole saws and reciprocating saw blades. The products use brazed industrial diamond grit to cut cast iron and other abrasive construction...

Continue Reading

Manual metallurgical saw features enclosed wet-cutting area with dual coolant nozzles - TheFabricator.com

Manual metallurgical saw features enclosed wet-cutting area with dual coolant nozzles

January 9, 2012

Kalamazoo Industries offers the model K12-14MS manual metallurgical saw. It features an enclosed wet-cutting area with dual coolant nozzles to eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-in. abrasive wheel; a 5-HP, three-phase, 1,725-RPM TEFC motor; dual...

Continue Reading

Minimal footprint band saws designed to meet daily production requirements

December 20, 2011

Peddinghaus Corp. offers Eco-Line band saws for cutting steel. Designed to meet daily production requirements, the saws work quickly and efficiently and have a minimal footprint, the company reports. The saws can cut at 30-, 45-, 90-, and 135-degree angles. They facilitate the integration of...

Continue Reading

Circular saw blades suitable for cutting light- and heavy-wall tubes, extrusions, plates - TheFabricator.com

Circular saw blades suitable for cutting light- and heavy-wall tubes, extrusions, plates

November 7, 2011

Forrest Mfg. offers circular saw blades for cutting nonferrous metals such as copper, aluminum, and brass. They are suitable for cutting light- and heavy-wall tubes, extrusions, and plates. According to the company, the blades produce burr-free cuts that eliminate the need for filing. Nineteen...

Continue Reading

Three-axis drilling, marking, sawing machine introduced

July 25, 2011

Knuth Machine Tools USA Inc. has introduced the new BeamCenter CNC 1200 saw and drill press center. It offers centrally controlled, customizable beam production, performing simultaneous three-axis drilling, marking, and sawing. The machine features four station tool changers per drill spindle,...

Continue Reading

Vertical column saw designed for nonproduction applications - TheFabricator.com

Vertical column saw designed for nonproduction applications

July 11, 2011

The Kalamazoo Machine Tool model C315/350 hinge-type vertical column saw is designed for nonproduction applications requiring cuts in tubes, pipes, and light structural shapes. The saw has a 14-in. blade, 3.5-HP motor, spindle speeds of 24 to 105 RPM with an infinitely variable option in...

Continue Reading

Automatic tube saw operates as stand-alone unit or part of processing line - TheFabricator.com

Automatic tube saw operates as stand-alone unit or part of processing line

June 20, 2011

The TC720 automatic tube saw from BLM Group USA is designed to operate as a stand-alone unit or as part of a fully automated tube processing line controlled by a single CNC. The programming system has an applications-tested database that covers blade speeds and feeds for different materials,...

Continue Reading

Wet benchtop saw measures 24 in. in all dimensions - TheFabricator.com

Wet benchtop saw measures 24 in. in all dimensions

May 31, 2011

Kalamazoo Industries' model K10WBT enclosed, wet cutting, benchtop abrasive saw offers manual operation. The 10-in.-dia. abrasive blade (not included) allows the machine to cut up to 1.5-in. solids and 2.5-in. pipe. The saw features a magnetic switch; an internal worklight; dual 3-in. vises;...

Continue Reading