Waterjet Cutting Products

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content
Waterjet cutting machine has extended tank, three independently controlled heads - TheFabricator.com

Waterjet cutting machine has extended tank, three independently controlled heads

November 27, 2011

WARDJet's ZX-2546 waterjet cutting machine has an extended tank and cross-beam design to enable triple-head cutting while allowing for single-head cutting of a full 8- by 12-ft. sheet. Each of the three heads is controlled independently by its own AC servomotor. This allows for independent...

Continue Reading

Waterjet cutting system features work surfaces up to 60 x 120 in. - TheFabricator.com

Waterjet cutting system features work surfaces up to 60 x 120 in.

November 21, 2011

MultiCam® Inc. has added the Value-Series waterjet to its product line. This pure water or abrasive cutting system features work surfaces up to 60 by 120 in. Fully enclosed bellows protect the Y and Z axes from abrasive garnet buildup. The X axis features dual drives and completely covered,...

Continue Reading

Models added to abrasive waterjet line

November 7, 2011

MAXIEM Waterjets, a division of OMAX® Corp., has added 16 new abrasive waterjet machines to its line of JetCutting centers. The 2000, 3000, and 4000 series employ the same 50,000-PSI, direct-drive pump technology as OMAX's JetMachining® centers. They also feature Intelli-MAX® software and...

Continue Reading

Metal cutting controller has expanded functionality

September 14, 2011

Hypertherm has announced plans to produce the new MicroEDGE Pro CNC with the latest Phoenix® version 9 software. The CNC delivers customizable control for a variety of cutting applications. The software expands the control's functionality for multiple plasma bevel designs, waterjet, and cutting...

Continue Reading

Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water - TheFabricator.com

Waterjet intensifier pump produces up to 3 GPM of ultrahigh-pressure water

May 23, 2011

Jet Edge Inc. has introduced the iP60-150, a 150-HP, 60,000-PSI waterjet intensifier pump. It can produce up to 3 GPM of ultrahigh-pressure water for precision waterjet cutting and UHP surface preparation applications. It supports orifices up to 0.025 in. and features dual intensifier systems....

Continue Reading

Mobile abrasive waterjet system mounted to steel base with forklift access points - TheFabricator.com

Mobile abrasive waterjet system mounted to steel base with forklift access points

May 2, 2011

OMAX® Corp. has developed mobile JetMachining® centers for oil field maintenance, high-rise steel construction, shipbuilding, and commercial industries supporting government programs. The abrasive waterjet machines are mounted to a steel base with forklift access points so they can be...

Continue Reading

Dual-unit electric servo pump doubles output volume - TheFabricator.com

Dual-unit electric servo pump doubles output volume

April 25, 2011

TECHNI Waterjet™ has released the QUANTUM ESP Electric Servo Pump™ dual unit for its QUANTUM ESP55 and ESP66 waterjet cutting systems. The dual unit doubles the output volume of the single models. It allows the waterjet to cut with a single large cutting head or two standard cutting...

Continue Reading

Waterjet cutting head delivers up to 8.6 GPM of ultrahigh-pressure water - TheFabricator.com

Waterjet cutting head delivers up to 8.6 GPM of ultrahigh-pressure water

February 22, 2011

Jet Edge’s High Flow Abrasivejet delivers up to 3.5 lbs./min. of abrasive and up to 8.6 GPM of ultrahigh-pressure water for abrasive waterjet cutting applications. The cutting head is suitable for making separation cuts in steel plates or pipes. It can operate at up to 55,000 PSI and is...

Continue Reading

Abrasive waterjet cutting system available in two models, including a modular, expandable design - TheFabricator.com

Abrasive waterjet cutting system available in two models, including a modular, expandable design

November 29, 2010

Bystronic offers the Byjet Classic abrasive waterjet cutting system in the Classic 3015 (5 by 10 ft.) model or in the Classic L (10 by 32 ft.) model. The base frame of the Classic L model is a modular construction that can be expanded in 6.5-ft. increments based on the end user's needs. All...

Continue Reading

Waterjet pump can run continuously at 60,000 PSI - TheFabricator.com

Waterjet pump can run continuously at 60,000 PSI

November 8, 2010

OMAX® Corp. has developed the new EnduroMAX™ pump for its JetMachining® centers. The pump runs at 55,000 PSI for 1,000 hours between required pump rebuilds, the company reports. It also can run continuously at 60,000 PSI. The pump operates at 85 percent efficiency. It uses...

Continue Reading

Abrasive waterjet machine's traction drive system designed to handle abrasive environment

October 18, 2010

OMAX® Corp. offers the MAXIEM® 0707 abrasive waterjet system. It is equipped with a 30-HP, high-pressure, direct-drive, 50,000-PSI pump and Intelli-MAX® software. The machine also integrates a patent-pending X- and Y-axis traction drive system designed to handle an abrasive environment, as well...

Continue Reading

Abrasive waterjet line expanded - TheFabricator.com

Abrasive waterjet line expanded

September 7, 2010

OMAX® Corp. has added the MAXIEM® 2040 and MAXIEM 0707 to its line of abrasive waterjet machines. The machines are made in the U.S., and all models incorporate 50,000-PSI, direct-drive pump technology. The pumps deliver more cutting power per kilowatt than intensifier-type pumps and are...

Continue Reading

Waterjet cutting system pump rated at 94,000 PSI

August 30, 2010

Flow Intl. offers the Mach 4 system, which combines the company's HyperJet® pump and Dynamic Waterjet XD high-precision flat-stock and 3-D cutting technology. The pump, rated at 94,000 PSI, delivers continuous operating pressure at 87,000 PSI. Dynamic Waterjet eliminates stream lag and taper...

Continue Reading

Five-axis waterjet cutting machine introduced

August 17, 2010

Jet Edge Inc. has introduced the Idro line five-axis precision waterjet cutting machine. Capable of cutting almost any material, it is available in three sizes: 5.5 by 6.5 ft. nominal, 5.5 by 13 ft. nominal, and 6.5 by 13 ft. nominal. The machine features the IKC five-axis waterjet cutting head...

Continue Reading

Waterjet intensifier pumps available in sizes from 30 to 200 HP - TheFabricator

Waterjet intensifier pumps available in sizes from 30 to 200 HP

July 12, 2010

Jet Edge Inc. has released a brochure highlighting its precision waterjet intensifier pumps in sizes from 30 to 200 HP. The pumps can produce pressures from 60,000 to 90,000 PSI and flow rates of 0.65...

Continue Reading