Finishing

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content

Cleaner removes difficult-to-emulsify oils, surface soils

June 14, 2005

Safe Scrub® OS split cleaner from Birchwood Casey is designed for removing difficult-to-emulsify oils and surface soils.The cleaner lifts oil from iron and steel parts and then floats the oil...

Continue Reading

Weiler Corp. acquires Conicity Technologies

June 14, 2005

Weiler Corp. has acquired Conicity Technologies LLC. Founded in 1999, Conicity developed the patented Engineered Micro-Geometry™ (EMG) technology for preparing cutting tool edges.Weiler Corp....

Continue Reading

International Paint opens Chicago distribution center

May 10, 2005

International Paint LLC, a division of Akzo Nobel, has opened a Chicago distribution center.Previously located in Louisville, Ky., the new, 10,000-sq.-ft. facility located at 931 N. DuPage Ave.,...

Continue Reading

Flap wheels designed for consistent cutting, finishing

April 12, 2005

Even Cut Abrasive Co. offers balanced flap wheels designed to produce consistent cuts and finishes.Radially mounted around a metal shank or hub, the wheels are suitable for contouring, blending,...

Continue Reading

North American Galvanizing & Coatings to purchase Gregory Galvanizing

April 12, 2005

North American Galvanizing & Coatings Inc. has reached a tentative agreement with Gregory Industries Inc. to purchase Gregory's hot-dip galvanizing assets located in Canton, Ohio.The acquisition...

Continue Reading

Tungsten grinder has built-in dust collector

March 8, 2005

Arc-Zone.com offers the hand-held Sharpie™.DXV vacuum tungsten grinder that includes a built-in dust collection system.The grinder has an adjustable grind angle/taper collet assembly.

Continue Reading

Pass-through blaster integrates with paint system monorail

December 7, 2004

Viking Blast and Wash Systems' MR 2412 pass-through airless blaster integrates with the paint system monorail for continuous blast and paint operations.The heavy-duty, hands-free system operates at...

Continue Reading

Prefinishing trends towards growth

October 12, 2004

By:

Since its introduction in the 1960s, coated coil has become the raw material of choice for some industries, and its demand has increased steadily, according to the National Coil Coating Association (NCCA). Coated steel and aluminum coil is being used predominantly in the building industry as...

Continue Reading

Balzers enters research cooperation agreement

July 13, 2004

Balzers, a provider of PVD coatings, is inaugurating a research laboratory in Innsbruck, Austria, together with three Austria-based partners: Plansee AG, the Montan University Leoben, and the...

Continue Reading

Front-load parts washer accepts most automotive parts

May 4, 2004

Cuda Cleaning Systems offers a front-load, automatic parts washer large enough to accommodate engine blocks and other automotive components.The Cuda 2840 features a 40-in.-high wash cabinet and a...

Continue Reading

Disks, brushes clean, deburr without damaging underlying surface

April 27, 2004

The Scotch-Brite™ radial bristle disks and brushes from 3M are designed for industrial applications, such as cleaning metal before welding, removing discoloration and sealant, and deburring,...

Continue Reading

Grinding machine maintains punching machine tools

April 8, 2004

TRUMPF has introduced the quicksharp® ITM grinding machine to maintain punching machine tools. The machine features updated electronic controls, a touch-sensitive keyboard, and LCD. A signal lamp...

Continue Reading

Choosing the right coated abrasive for plate finishing applications

January 29, 2004

By: ,

Most plate fabricating companies need to select a coated abrasive to finish their parts. This selection process can be intimidating, as well as confusing, because so many types of coated abrasives are available.

Continue Reading

Blast Cleaning Equipment: What you need to know before buying

October 23, 2003

By:

If you are a fabricator of metal parts that need to be primed or painted, then you more than likely will have to prepare the part surface before finishing to produce the desired end result.

Continue Reading

Fabricating technology advancements drive new plate finishing trends

July 10, 2003

By:

The same industry forces of nature—globalization, economic conditions, quality demands, and safety and environmental regulations—that are pressuring metal fabricators to do more, better, and faster with less are blowing no less forcefully on finishing fabricators.

Continue Reading