Sawing

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content

DGI Supply to acquire Anich Industries

October 1, 2012

DGI Supply, a DoALL Company, has announced its intent to acquire Anich Industries Inc. of Ocala, Fla. The transaction is expected to close Oct. 1. Dave and Mary-helen Anich, Anich's co-owners, will continue to manage the company after the acquisition. Anich Industries Inc. was established in 1988...

Continue Reading

Automatic band saws feature twin prismatic guide columns

September 26, 2012

Pat Mooney Inc. – The Saw Company offers the Danobat iDS 5A automatic band saw. It features twin prismatic guide columns to help ensure torsion-free travel throughout the sawing range. The main prismatic guide column travels on linear rails and linear bearings, while the support prismatic guide...

Continue Reading

Simonds Intl. announces agreement with Cal Saw Canada

September 24, 2012

Simonds Intl., Fitchburg, Mass., and Cal Saw Canada have announced an agreement for Simonds to purchase Cal Saw Canada's wide band saw manufacturing assets and circular saw finishing assets located in Langley, B.C. Simonds will continue to provide these products. Since this agreement does not...

Continue Reading

Semiautomatic band saw designed for production sawing - TheFabricator.com

Semiautomatic band saw designed for production sawing

September 20, 2012

The Kalamazoo Machine Tool model KS600 semiautomatic band saw is designed for production sawing of solids and structural shapes up to 20 in. at 90 degrees in full-cycle, semiautomatic operation. The saw offers double mitering up to 60 degrees left or right. The blade speed is infinitely...

Continue Reading

Savage Saws changes logo to reflect parent corporation - TheFabricator.com

Savage Saws changes logo to reflect parent corporation

August 21, 2012

Savage Saws, East Haven, Conn., a manufacturer of chop, guillotine, plate, metallurgical, foundry, gantry, and custom-built specialty saws, is changing its logo to associate the company better with its parent corporation, Inductotherm Group. Comprising 40 companies, Inductotherm Group serves...

Continue Reading

Scotchman Industries to mark 45 years in business with open house

August 21, 2012

Scotchman Industries Inc., Philip, S.D., is celebrating its 45th year in business with an open house on Sept. 18, 2012, from 9:00 a.m. to 3:00 p.m. MDT. The company will offer tours of its 120,000-sq.-ft. factory, live machine demonstrations, and a meet-and-greet with customer service...

Continue Reading

Circular saw blades designed to cut aluminum - TheFabricator.com

Circular saw blades designed to cut aluminum

August 16, 2012

The M. K. Morse Co. has introduced Metal Devil New Xtreme Technology (NXT™) aluminum-cutting circular saw blades. Ten blades are available from 5.375 to 14 in. dia. According to the manufacturer, the blades provide smooth, fast cuts in a variety of aluminum shapes and...

Continue Reading

Mitering band saw designed for large beams, structural material - TheFabricator.com

Mitering band saw designed for large beams, structural material

August 8, 2012

Behringer has introduced the new HBP-510/1208G mitering band saw for precision, high-speed cutting of large structural beams and profiles. With a cutting range of 47.2 by 20.0 in. and a bilateral miter of 30 degrees off of 90 degrees on both left and right side, the new saw is suitable for use...

Continue Reading

Wet abrasive saw engineered for quality testing of foundry castings - TheFabricator.com

Wet abrasive saw engineered for quality testing of foundry castings

June 28, 2012

The Kalamazoo Industries model K36 wet abrasive saw is designed for foundries that need to cut very large heat-treated castings for porosity inspection. The saw features a 50-HP motor driving a 36-in. abrasive wheel with an abrasive composition engineered for the specific alloy being cut....

Continue Reading

Band saw designed for high-speed aluminum cutting - TheFabricator.com

Band saw designed for high-speed aluminum cutting

June 27, 2012

Behringer has introduced the new HBM800ALU band saw for high-speed cutting of aluminum and other nonferrous materials. The fully automatic saw uses a 1.25-in. saw blade, either bimetal or carbide-tipped. After stock is loaded, the machine manages all aspects of the process and displays real-time...

Continue Reading

Pneumatic circular saw features ultrathin blade for dry cutting - TheFabricator.com

Pneumatic circular saw features ultrathin blade for dry cutting

May 31, 2012

CS Unitec has introduced a 9-in. pneumatic circular saw for dry cutting steel plate up to 0.375 in. thick, as well as nonferrous metal and grating. The 19-lb. model 5 1115 0020 metal cutting saw is suitable for such industries as foundries, petrochemical, nuclear, marine, demolition, and...

Continue Reading

Saw designed for minimum backlash

May 31, 2012

The AMSAW® line from Advanced Machine & Eng. Co. uses carbide or cermet blades to cut ferrous and nonferrous material, bars, billets, rails, profiles, pipes, and tubes.The compact, rigid design includes hardened spindle gears ground for minimum backlash. The saw blade guide and dampening...

Continue Reading

Unist launches new website

May 3, 2012

Unist Inc., Grand Rapids, Mich., has overhauled its website at www.unist.com. New features include easier access to product information and documentation and a growing video library. The site highlights the company's environmentally friendly lubrication systems and products for metal cutting and...

Continue Reading

Billet sawing systems feature carbide blades - TheFabricator.com

Billet sawing systems feature carbide blades

March 29, 2012

AMSAW® high-speed production saw machines use carbide blades to cut ferrous and nonferrous pipes, tubes, bars, billets, rails, and profiles. The machine features a compact, rigid design; hardened spindle gears ground for minimum backlash; a saw blade guide and dampening device;...

Continue Reading

Manual band saw made for light-duty cutting - TheFabricator.com

Manual band saw made for light-duty cutting

March 22, 2012

The Kalamazoo Machine Tool model H235 manual band saw is designed for light-duty cutting of tubes, pipes, light structural shapes, and small solids up to 8 in. at 90 degrees. The saw has a variable-speed blade from 65 to 320 FPM and can miter up to 60 degrees to the right while maintaining the...

Continue Reading