Plasma Cutting Products

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content
Pipe cutting attachment for plasma system offered - TheFabricator.com

Pipe cutting attachment for plasma system offered

February 7, 2012

PlasmaCAM Inc. has introduced a new pipe cutting attachment for its CNC plasma cutting system and software. The machine can cut sheet metals from 30 ga. to 1 in. thick, as well as round pipe and tubing. The attachment can perform cuts from simple saddles to four-way header collectors on pipes...

Continue Reading

Plasma cutting system consumables designed for extended life

October 17, 2011

Hypertherm now offers Centricut consumables for Kaliburn Spirit and ProLine plasma cutting systems. According to the manufacturer, laboratory testing shows the life expectancy of the consumables is two to three times longer than that of OEM consumables when cutting at 275 amps and below, and more...

Continue Reading

Plasma system processes both plates and tubes

October 3, 2011

AKS Cutting Systems has introduced a system for plasma processing of both plates and tubes. Available on its accu-kut heavy-duty, unitized precision plasma plate cutting system, the tube processing center can perform plasma processing of tube and pipe. Used in conjunction with the robo-kut plasma...

Continue Reading

Metal cutting controller has expanded functionality

September 14, 2011

Hypertherm has announced plans to produce the new MicroEDGE Pro CNC with the latest Phoenix® version 9 software. The CNC delivers customizable control for a variety of cutting applications. The software expands the control's functionality for multiple plasma bevel designs, waterjet, and cutting...

Continue Reading

Plasma cutter with drilling spindle designed for heavy plate

August 29, 2011

MultiCam® Inc. offers the heavy-duty 6000 series CNC bridge and rail plasma with drilling spindle. The system is designed for manufacturers cutting heavy plate or needing a large processing area while maintaining accuracy and cut quality. The motion platform is independent from the cutting...

Continue Reading

Metal cutting consumables for Kjellberg systems introduced

August 23, 2011

Hypertherm, a U.S.-based manufacturer of advanced metal cutting systems, has introduced Centricut consumables for owners of Kjellberg's Fine Focus 800 Plus system or HiFocus 280i, 360i, or 440i systems. The consumables are designed for companies that own these systems and cut mild steel using...

Continue Reading

Servo drive system for plasma, oxyfuel cutting introduced - TheFabricator.com

Servo drive system for plasma, oxyfuel cutting introduced

August 16, 2011

Dynatorch has introduced its XLR8 CNC motion control system with integrated arc voltage torch height control for plasma and oxyfuel cutting. Utilizing the company's proprietary software, the system is designed for increased torque and faster communications for enhanced detail and smooth motion....

Continue Reading

Automated plasma cutting system offers production piercing, cutting up to 2 in. - TheFabricator.com

Automated plasma cutting system offers production piercing, cutting up to 2 in.

August 1, 2011

Thermal Dynamics®, a Thermadyne® brand, has added the Ultra-Cut® 400 to its line of high-precision automated plasma systems. The system delivers 400 amps at 200 V at 100 percent duty cycle. It offers production piercing and cutting up to 2 in. on mild steel, stainless steel, and 2.25-in....

Continue Reading

Marking machine produces all layout on structural steel section in single pass

July 11, 2011

Peddinghaus Corp. has released the PeddiWriter automatic layout marking machine. The stand-alone machine produces all layout on a structural steel section in a single pass. Incorporating two independent Hypertherm ArcWriting torches within a four-axis layout marking system, the machine allows...

Continue Reading

Stainless steel water coolers provide long-term cooling in GTAW, GMAW, and plasma cutting applications - TheFabricator.com

Stainless steel water coolers provide long-term cooling in GTAW, GMAW, and plasma cutting applications

June 27, 2011

Weldcraft offers six models of stainless steel water coolers, designed to provide consistent, long-term cooling in GTAW, GMAW, and plasma cutting applications. Each of the water coolers is available in 115- and 230-V models and operates on single-phase power. The 2500SS and 2502SS water coolers...

Continue Reading

Retrofit torch, consumable line expanded - TheFabricator.com

Retrofit torch, consumable line expanded

June 20, 2011

Hypertherm has expanded its line of Duramax™ retrofit torches and consumables. The torches now are approved for use on the company's Powermax1650®, and a new straight torch joins the previously released 75-degree hand torch and convertible machine torch. The straight torch, designed...

Continue Reading

Plasma cutting technology for mild steel introduced - TheFabricator.com

Plasma cutting technology for mild steel introduced

May 16, 2011

Kjellberg Finsterwalde has introduced Contour Cut plasma cutting technology for mild steel on its HiFocus plasma cutting systems with PerCut 200/210 and PerCut 440/450 plasma torches. On small inside and outside contours, small webs, and other fine contours, angular deviation varies between 2...

Continue Reading

Plasma, oxyfuel machine designed for cutting over large working areas - TheFabricator.com

Plasma, oxyfuel machine designed for cutting over large working areas

April 25, 2011

ESAB Cutting Systems has introduced the Sabre DXG heavy-duty cutting machine for high-production plasma and oxyfuel cutting over large working areas. The modular machine features a high-stiffness welded beam assembly with dual linear ways, digital AC drives, and heavy-duty gearboxes. The gantry...

Continue Reading

Plasma machine cuts up to 0.75-in.-thick material

March 29, 2011

Thermal Dynamics®, a Thermadyne® brand, has expanded its True series of plasma cutting machines with the addition of the Cutmaster® 42. The lightweight, portable machine delivers 27 amps of output power on 120-V input and 40 amps on 230-V input. It can cut up to 0.75-in.-thick material....

Continue Reading

Plasma torches now available for upgrade

February 28, 2011

Hypertherm has announced that its Duramax™ torch series now is available for upgrade on its Powermax1000® and Powermax1250® plasma systems. The torches use a new Conical Flow™ nozzle and spring electrode to help increase consumable life up to 55 percent, according to the company. They are...

Continue Reading